Abstract:In this study, we evaluated the use of prickly pear seed cake, a by-product of prickly pear seed oil extraction, as a new precursor for producing activated carbon by phosphoric acid activation, and the obtained carbon’s capacity for heavy metal removal from aqueous solution. Response surface methodology based on the full factorial design at two levels (24) was developed to reduce the number of experiments and reach optimal preparation conditions for the removal of cadmium and lead ions from aqueous solutions. Design Expert 11.1.2.0 Trial software was used for generating the statistical experimental design and analyzing the observed data. Factors influencing the activation process, such as carbonization temperature, activation temperature, activation time, and impregnation ratio, were studied. Responses were studied in depth with an analysis of variance to estimate their significance. Each response was outlined by a first-order regression equation demonstrating satisfactory correspondence between the predicted and experimental results as the adjusted coefficients of correlation. Based on the statistical data, the best conditions for the removal of heavy metals from aqueous solution by the obtained activated carbon were indicated. The maximum iodine number and methylene blue index were 2527.3 mg g−1 and 396.5 mg g−1, respectively, using activated carbon obtained at the following conditions: Tc = 500 °C, Ta = 500 °C, impregnation ratio = 2:1 (g H3PO4: g carbon), and activation time of two hours. The maximum adsorption reached 170.2 mg g−1 and 158.4 mg g−1 for Cd2+ and Pb2+, respectively, using activated carbon obtained at the following conditions: Tc = 600 °C, Ta = 400 °C, impregnation ratio = 2:1 (g H3PO4: g carbon), and activation time of one hour. The activated carbon obtained was characterized by Boehm titration, pH of point of zero charge (pHPZC), Brunauer–Emmett–Teller surface area (SBET), and scanning electron microscopy. Adsorption was performed according to different parameters: pH solution, adsorbent dosage, temperature, contact time, and initial concentration. Regeneration experiments proved that the obtained activated carbon still had a high removal capacity for Cd2+ and Pb2+ after five regeneration cycles.

Pb (II) Adsorption over Activated Carbon Prepared from Cedrus Deodara Bark by Na2CO3 Activation: Optimal Design for Modelling and Process Optimization

Cd(II) adsorption on various adsorbents obtained from charred biomaterials.

Cd2+ removal efficiency of activated carbon from Prosopis juliflora: Optimization of preparation parameters by the Box-Behnken Design of Response Surface Methodology

Removal of Cadmium Ions from Synthetic Wastewater by using Pennisetum purpureum (Elephant Grass) as Low Cost Biodegradable Adsorbent (Biosorbent)

Optimization of the Preparation of Activated Carbon from Prickly Pear Seed Cake for the Removal of Lead and Cadmium Ions from Aqueous Solution

Investigation and optimization of cadmium ion adsorption from wastewater using raw and activated carbon of Pterocarpus santalinoides fruit

Low-temperature aerobic carbonization and activation of cellulosic materials for Pb2+ removal in water source

Adsorption of Pb, Cu, and Ni Ions on Activated Carbon Prepared from Oak Cupules: Kinetics and Thermodynamics Studies

Low-temperature aerobic carbonization and activation of cellulosic materials for Pb<SUP>2+</SUP> removal in water source

Adsorption of lead from aqueous solution using Teak (Tectona grandis) sawdust

Efficient Removal of Pb2+ from Water by Bamboo-Derived Thin-Walled Hollow Ellipsoidal Carbon-Based Adsorbent.

Efficient Removal of Pb 2+ from Water by Bamboo-Derived Thin-Walled Hollow Ellipsoidal Carbon-Based Adsorbent

Biomass-derived Porous Carbon Highly Efficient for Removal of Pb(II) and Cd(II)

Adsorption of cadmium (II) ions from aqueous solution by a new low-cost adsorbent—Bamboo charcoal

Adsorption Study of Pb(II) by Chemically Modified Cattail Stem

Removal of Heavy Metal Ions (Pb2+, Co2+, and Cd2+) by Activated Carbon from Cypress Fruit: An Investigation of Kinetics, Thermodynamics, and Isotherms

Synthesis and characterization of cost-effective and high-efficiency biochar for the adsorption of Pb2+ from wastewater

Continuous removal of Pb (II) and Cu (II) ions from synthetic aqueous solutions in a fixed-bed packed column with surfactant-modified activated carbon

Enhanced adsorption of phenolic compounds using biomass-derived high surface area activated carbon: Isotherms, kinetics and thermodynamics

Adsorption isotherms and removal of lead (II) and cadmium (II) from aqueous media using nanobiochar and rice husk

Effective removal of chromium by adsorption using Delonix regia bark derived activated carbon from aqueous solution: a sustainable approach