Abstract:Landslides involving solid–fluid interaction such as submarine landslides and landslide dams occur frequently around the world, which may bring severe damage to human lives and properties. Investigation of such landslides is thus of significance to hazard prevention and mitigation. To conduct the analysis, there are three key points to be addressed: (a) the landslide failure process, (b) the free surface flow, and (c) the solid–fluid interaction process. Discontinuous deformation analysis (DDA) method is suitable for analyzing discontinuous blocky systems and has outstanding advantages in simulating the landslide failure process. Meanwhile, smoothed particle hydrodynamics (SPH) method is well-suited for modeling the free surface flow. However, the consideration of solid–fluid interaction in these two methods is seldom, which somehow restricts their applications. With the aim to take advantages of these two methods, a coupled DDA–SPH method in two-dimensional case is proposed, in which the solid–fluid interaction is forced using a penalty approach. The SPH formulations are implemented into DDA code. Several numerical examples are presented to check the validity of the proposed method. A dam-break test is first investigated to show the success of implementing SPH into DDA code for modeling the fluid flow in later simulations of fluid–solid systems. Subsequently, the performance of the coupled DDA–SPH method is validated through a submarine rigid landslide, and the simulation results are in good agreement with the experimental data. Further, an extension study on the submarine deformable landslide is performed, in which the landslide mass consists of multiple blocks and a sensitivity analysis on the interface friction angle between blocks is conducted. Finally, a designed landslide dam is simulated to show the applicability and feasibility of the coupled DDA–SPH method.

3D Simulation of Dam-break effect on a Solid Wall using Smoothed Particle Hydrodynamics

Numerical Simulation of Two-Dimensional Dam Failure and Free-Side Deformation Flow Studies

Numerical Simulation of Dam-Break Flow Impacting a Stationary Obstacle by a CLSVOF/IB Method.

Numerical Investigation of Silted-Up Dam-Break Flow with Different Silted-Up Sediment Heights

SPH simulations of 3D dam-break flow against various forms of the obstacle: Toward an optimal design

Three-Dimensional Smoothed Particle Hydrodynamics Method for Simulating Free Surface Flows

A Numerical Validation of 3D Experimental Dam-Break Wave Interaction with a Sharp Obstacle Using DualSPHysics

Numerical Simulation To The Effect Of Air In Dam-Break Problem

Swe-Sphysics Simulation of Dam Break Flows at South-Gate Gorges Reservoir

Numerical simulation of dam-break flows using SPH method

Application Of Sph Method To Dam-Break Flow Through City Layouts

Development of a Coupled DDA–SPH Method and Its Application to Dynamic Simulation of Landslides Involving Solid–Fluid Interaction

A comparison between weakly-compressible smoothed particle hydrodynamics (WCSPH) and moving particle semi-implicit (MPS) methods for 3d dam-break flows

Reflective boundary conditions coupled with the SPH method for the three-dimensional simulation of fluid–structure interaction with solid boundaries

Numerical simulation of the movement of the water surface with macroscopic particles during a partial dam break for various complex reliefs

Simulation of floating debris in SPH shallow water flow model with tsunami application

3D-SPH-DEM coupling simulation for the large deformation failure process of check dams under debris flow impact incorporating the nonlinear collision-constraint bond model

SPH study of the evolution of water–water interfaces in dam break flows

Simulating Dam-Break Flooding with Floating Objects Through Intricate City Layouts Using Gpu-Based Sph Method

Study on landslide-induced wave disasters using a 3D coupled SPH-DEM method

Comparative study of SPH and MPS methods for numerical simulations of dam breaking problems