Abstract:In this article, a compact dual-band metamaterial absorber (MMA) is suggested for the purpose of solid materials sensing in the C- and Ku-wireless bands. The proposed MMA is formed by a basic cell based on a novel shape of the folded arms square split ring resonator (FAS-SRR).The size of the cell forming the absorber is optimized for an electrical dimension of 0.27 λ 0 × 0.27 λ 0 × 0.034 λ 0 , where λ 0 is the free space wavelength calculated at 6.78 GHz. The physical behavior of the MMA has been explored by equivalent circuit model representing the frequency response as well as electromagnetic field analysis of the FAS-SRR. The MMA is used as a solid material sensor in both C- and Ku-bands. The material under test (MUT) is placed on the FAS-SRR patch to ahave a compact structure. The direct contact between the MMA and the MUT causes shifts in resonance frequencies in the two bands which makes the sensor more sensitive. For the MUT, we tested four materials with different permittivity ranging from 2.17 to 3.55. Simulation results show that the MMA has polarization-insensitive absorption with incident angle stability up to 45° for both transverse electric (TE) and transverse magnetic (TM) modes. The proposed MMA absorbs in the C- and Ku-band with two absorption peaks near-unity; one of them is located for an absorption coefficient of 91.73% at 6.78 GHz. The second absorption rate of 99.97% is located in the Ku-band at 13.92 GHz. The proposed MMA shows good detection qualities with a sensitivity of 4.62% (800 MHz frequency shift) at the lower band and 4.53% (1610 MHz frequency shift) at the upper band. All these absorption and sensing qualities of the proposed MMA with unique shape make it a potential candidate for solid materials sensing in microwave frequency spectrum.

An Ultra-Wideband All-Textile Metamaterial Absorber for Ku, K and Ka Band Applications

A Flexible Foldable Broadband Metamaterial Absorber Fabricated by Intaglio Printing Technology

Broadband Metamaterial Absorber with an In-Band Metasurface Function.

Design, Characterization and Fabrication of a Flexible Broadband Metamaterial Absorber Based on Textile

A wideband, thin, dual-negative, and polarization-independent square-tooth circular ring resonator-based metamaterial absorber for Ku-band applications

A Broadband Metamaterial Absorber Design Using Characteristic Modes Analysis

An Ultra-Wideband Metamaterial Absorber With Active Frequency Selective Surface

Multimode Miniature Polarization-Sensitive Metamaterial Absorber with Ultra-Wide Bandwidth in the K Band

A 3-D Ultra-broadband Lightweight Metamaterial Absorber Based on Resistive Film with Metallic Strips

An ultra-broadband microwave absorber based on hybrid structure of stereo metamaterial and planar metasurface for the S, C, X and Ku bands

Polarization-Insensitive Ultra-wideband Metamaterial Absorber for C- and X-bands

Flexible Metamaterial Absorber with Tailored Bandwidth and High Absorption Performance

Ultra-Wideband Electromagnetic Composite Absorber Based on Pixelated Metasurface with Optimization Algorithm

A miniaturized folded square split ring resonator cell based dual band polarization insensitive metamaterial absorber for C- and Ku-band applications

Polarization insensitive eye-shape enclosed split ring resonator-based multi-band metamaterial absorber/sensor for S, C, X, Ku, and K-band microwave applications

Circular ring shaped ultra-wideband metamaterial absorber with polarization insensitivity for energy harvesting

A Lightweight Ultra‐Wideband Metasurface Microwave Absorber

An Ultra-Thin Triple-Band Polarization-Independent Wide-Angle Microwave Metamaterial Absorber

Ultra-Broadband Mid-Infrared Metamaterial Absorber Based on Multi-Sized Resonators

Flexible Ultrathin Metamaterial Absorber for Wide Frequency Band, Based on Conductive Fibers

A Wideband and Lightweight Metamaterial Absorber by Paper-based Three-dimensional Structure