Abstract:The continued growth in demand for mineral resources has led to a large amount of mining wastes, which is a major challenge in the context of carbon neutrality and climate change. In this study, runoff migration, batch leaching, and column experiments were used to investigate the short-, medium-, and long-term leaching of heavy metals from legacy tailings, respectively; the cumulative metal release kinetic equations were established, and the long-term effects of tailings leaching were verified by HYDRUS-1D . In runoff migration experiments, surface dissolution of tailings and the co-migration of adsorbed soil particles by erosion were the main carriers in the early stages of leachate formation (Mn ∼ 65 mg/L and SO 4 2- up to 2697.2 mg/L). Batch leaching tests showed that the concentration of heavy metals in soil leached by acid rain were 0.1 ∼ 22.0 μg/L for Cr, 0.7 ∼ 26.0 μg/L for Cu, 4.8 ∼ 5646.0 μg/L for Mn, 0.3 ∼ 232.4 μg/L for Ni, and 1.3 ∼ 448.0 μg/L for Zn. The results of column experiments indicated that some soluble components and metals with high mobility showed a significant decreasing trend at cumulative L/S ≤ 2. Additionally, the metals have higher leaching rates under TCLP conditions, as shown by Mn > Co > Zn > Cd > Ni > Cu > Pb > Cr. The fitting results of Langmuir equation were closer to the cumulative release of metals in the real case, and the release amounts of Mn, Zn, Co, and Ni were higher with 55, 5.84, 2.66, and 2.51 mg/kg, respectively. The water flow within tailings affects the spatial distribution of metals, which mainly exist in relatively stable chemical fractions (F3 + F4 + F5 > 90 %) after leaching. Numerical simulation verified that Mn in leachate has reached 8 mg/L at a scale of up to 100 years. The research results are expected to provide technical basis for realizing the resource utilization of tailings in the future.

Release behavior and mechanism of uranium and thorium from Ta-Nb tailings under simulated rainfall in Jiangxi Province, China

Release Behavior Uranium and Thorium in Soil from a Decommissioned Uranium Tailings in Jiangxi Province, China

Leaching Characteristics and Kinetics of Radioactive Element Uranium and Thorium from Ta/Nb Tailing

Release Behavior of Uranium from a Uranium Tailing in Jiangxi Province

Release behavior of uranium in uranium mill tailings under environmental conditions

Leaching behaviour of 226Ra from uranium tailings and adsorption behaviour in geotechnical medias

Research on Leaching Behavior of Uranium from a Uranium Tailing and Its Adsorption Behavior in Geotechnical Media

Revealing the release and migration mechanism of heavy metals in typical carbonate tailings, East China

Mineralogical Properties of a Refractory Tantalum-Niobium Slag and the Effect of Roasting on the Leaching of Uranium-Thorium

Releasing Characteristics of the Main Pollutants from Uranium Tailings Acting with Rain

Leaching characteristics and environmental impact of heavy metals in tailings under rainfall conditions: A case study of an ion-adsorption rare earth mining area

Mechanism of Uranium Release from Uranium Mill Tailings under Long-Term Exposure to Simulated Acid Rain: Geochemical Evidence and Environmental Implication.

Conditions affecting the release of thorium and uranium from the tailings of a niobium mine

Leaching Experiments on Cadmium Release from Cd-rich Oxidized Rocks at Jinding Pb-Zn Deposit

THE LEACHING PRINCIPLES OF HEAVY METALS IN LEAD AND ZINC TAILINGS IN SIMULATION ACID RAIN

Uranium Pollution Status and Speciation Analysis in the Farmland-Rice System Around a Uranium Tailings Mine in Southeastern China

Process mineralogical study of U/Th occurrence states and the carrier minerals in refractory tantalum slag

The effect of heavy precipitation on the leaching of heavy metals from tropical coastal legacy tailings

Emergent thallium exposure from uranium mill tailings

The release analysis of As and Cr metals in lead-zinc smelting slag: Mineralogical analysis, bioavailability and leachability analysis

Leaching of heavy metals from tungsten mining tailings: A case study based on static and kinetic leaching tests