Abstract:To improve the space utilization rates of intelligent stereo garages, their key execution equipment—parking robots—must be highly flexible; therefore, the chassis of parking robots use steering wheel systems. However, this design increases the complexity of robot motion control and path-tracking systems. Because of the large sizes of parking robots, large position and angle deviations can lead to derailment events, posing significant risk to users. Thus, in this study, based on the characteristics required for parking robots, a diagonally arranged parking robot with double steering wheels was developed and its kinematic model was established using the velocity–geometry method. For the positioning of the robot in a garage, a fusion positioning algorithm based on quick response (QR) codes and track calculation was used, considering the requirements of real-time response and accuracy. A discrete proportional-integral-derivative (PID) path-tracking algorithm for the synchronous compensation of the position and angle deviations was also devised. Using the Visual C++ platform, a path-tracking system that uses an industrial computer and motion control card was developed. Experiments on the path-tracking capability of the parking robot showed that, using the discrete PID path-tracking algorithm, it can track a planned path well. On Z- and U-type paths, its maximum tracking deviations were reduced by 84.8% and 64.0%, compared with the unused path-tracking system, reaching 10.4 mm and 10.9 mm, respectively. Thus, the tracking accuracy was significantly improved, proving that the developed robot well satisfies the path-tracking requirements of parking robots.

Unicycle Control System Based on PID Control Algorithm and Perspective Transformation Image Processing Algorithm

Intelligent Wheelchair Control System Based on Vision Navigation

Motion Analysis and Control Realization of Omni-Directional Robot

Face recognition and real-time tracking system based on convolutional neural network and parallel-cascade PID controller

Driverless Simulation of Path Tracking Based on PID Control

Design of Intelligent Trajectory Tracking Control System for Model Cars

Research and application of trajectory tracking control algorithm based on LQR and PID

Two-Wheeled Robot Platform Based On Pid Control

Neural Network Control Of Electric Vehicle Based On Position-Sensorless Brushless Dc Motor

Intelligent tracking car system based on single chip microcomputer

Design of a Control System for an Autonomous Vehicle Based on Adaptive-PID

Intelligent Balancing and Trajectory Tracking Control for Unicycle Robots

Design of balanced bicycle system based on anti-integral saturation and incomplete differential PID algorithm

Research on Hardware System Design Method of the Intelligent Vehicle Based on Dual Sensors

DEVELOPMENT OF DIRECTIONAL ALGORITHM FOR THREE-WHEEL OMNIDIRECTIONAL AUTONOMOUS MOBILE ROBOT

Intelligent Vehicle Path Tracking Control Based on Improved MPC and Hybrid PID

Visual Path Tracking Control for Park Scene

Intelligent tracking car design based on Fuzzy PID control

Trajectory Tracking of Autonomous Vehicle Based on Model Predictive Control With PID Feedback

Design and Implementation of PID-Based Steering Control for 1/10-Scale Autonomous Vehicle

Parking Robot Path-Tracking System Based on Discrete PID Algorithm