Abstract:Silicon (Si) has been considered as the most potential anode material for next-generation high-energy density lithium-ion batteries (LIBs) because of its extremely high theoretical capacity. However, the performance deterioration caused by volume change and low electrical conductivity of active Si particles greatly limit its commercial use. Here, we designed a nonstoichiometric TiOx-coated Si anode with a litchi-like structure, in which Si–Ti and Si–O dual bonds are expected to form between the Si core and TiOx shell. This unique structure plays a major role in preventing the volume expansion and improving the electrical conductivity of the Si anode. The as-prepared TiOx-coated Si anode could exhibit excellent cycling stability after 1000 cycles at 1000 mA g–1 with a relatively small capacity decay rate of ∼0.04% per cycle, which can be comparable to most of the modified Si anodes in references. This strategy of surface regulating on the Si anode could be extended to other electrodes with large volume expansion during cycling in LIBs for achieving competitive electrochemical properties.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10418?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10418</a>.Phases of different titanium oxides; SEM, TEM, HAADF STEM, and HRTEM images; XPS spectrum of pristine Si particles; CV curves of different samples; initial capacities and initial Coulombic efficiencies; galvanostatic discharge/charge curves; prolonged cycle life and Coulombic efficiencies; reversible capacity values; fitting data of impedance parameters; cycling performance data of recent literatures and the present work; and FT-IR spectra (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10418/suppl_file/am0c10418_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Silicon monoxide with black titania and carbon coating layer as an anode material for lithium-ion batteries

Three-dimensional Dual-Layered Conductive Binder Enables Stable and High Performance of SiOx/C Anodes

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

TiO2/Reduced‐Graphene‐Oxide Double‐Layer‐Coated SiO as High‐Performance Anode for Lithium‐Ion Batteries

Titanium Monoxide-Stabilized Silicon Nanoparticles with a Litchi-like Structure as an Advanced Anode for Li-ion Batteries

Highly Graphitized Carbon Coating on SiO with a π–π Stacking Precursor Polymer for High Performance Lithium-Ion Batteries

Introduction of amorphous TiO2 coating layer to improve the lithium storage of SiO2 nanospheres anode

SiO@C/TiO2 nanospheres with dual stabilized architecture as anode material for high-performance Li-ion battery

Controllable SiO x Coating Layer Promotes High Stable Si Anode for Lithium-Ion Batteries

Amorphous AlPO4 Layer Coating Vacuum Thermal Reduced SiOx with Fine Silicon Grains to Enhance the Anode Stability

A Low‐Cost and Scalable Carbon Coated SiO‐Based Anode Material for Lithium‐Ion Batteries

SiO2-Based Lithium-Ion Battery Anode Materials: A Brief Review

Core-Shell Si@Tio2 Nanosphere Anode by Atomic Layer Deposition for Li-Ion Batteries

Facilely Tunable Core-Shell Si@SiOx Nanostructures Prepared in Aqueous Solution for Lithium Ion Battery Anode

Batch-Scale Synthesis and Interfacially Enhanced Stability of Silicon Suboxide-Based Anodes toward High-Performance Lithium-Ion Batteries

High Performance SiOx Anode Enabled by AlCl3-MgSO4 Assisted Low-Temperature Etching for Lithium-Ion Batteries

A Hybrid Structure to Improve Electrochemical Performance of SiO Anode Materials in Lithium-Ion Battery

Carbon-coated Silicon/graphite Oxide Composites As Anode Materials for Highly Stable Lithium-Ion Batteries

Carbon and Li3BO3 co‐modified SiO x as anode for high‐performance lithium‐ion batteries

Multi-functional double carbon shells coated boron-doped porous Si as anode materials for high-performance lithium-ion batteries

Highly stable lithium-ion battery anode with polyimide coating anchored onto micron-size silicon monoxide via self-assembled monolayer