Abstract:Hypersonic boundary layer transition using high-order methods for direct numerical simulations (DNS) is largely unexplored, although a few references exist in the literature. Experimental data in the hypersonic regime are scarce, while almost all existing hypersonic codes have low-order accuracy, which could lead to erroneous results in long-time integration and at high Reynolds numbers. Here, we focus on the transition from laminar to turbulent flow, where the Nusselt number may be five times or higher than the Nusselt number in the turbulent regime. The hypersonic flow regime must be modeled accurately using realistic chemistry to predict heat flux on the surface correctly. In this study, we simulate hypersonic boundary layer transition on a flat plate to compute the thermal and shear stresses on the wall. The domain is initialized with a laminar Blasius solution of compressible boundary layer equations. The transition to turbulence is induced using suction and blowing from a thin strip on the wall. Sponge regions are defined at the inflow and outflow boundaries to eliminate the solution contamination due to the reflections of the boundary conditions. In the spanwise direction, periodic boundary conditions are imposed. The numerical method applied here is a sixth-order compact finite difference in the interior of the domain coupled with a fourth-order Runge-Kutta time-stepping scheme for a structured Cartesian grid using staggered variables. The base finite difference code can perform simulations of non-equilibrium hypersonic flows. The numerical scheme is stabilized using the approximate deconvolution model (ADM) and artificial diffusion coefficients. We investigated the effect of non-equilibrium chemistry on the non-linear instability growth with hypersonic boundary layers. We also quantify thermal loads during the boundary layer laminar to turbulent transition for Mach number 10.

Local-Variable-Based Transition Model for Hypersonic Flows Considering Wall Mass Injection

Application of simplified threeGequation transition model in hypersonic flow

Effects of compressibility correction onγ-Reθ transition model

Multiple temperature model of nonlinear coupled constitutive relations for hypersonic diatomic gas flows

Boundary-layer Transition Prediction Using a Simplified Correlation-Based Model

Computation of Hypersonic Transitional Flows Over Cones Using Gas-Kinetic Scheme Coupled with the Turbulence Model

Effects of Wall Transpiration on the Supersonic Boundary-Layer Oblique-Type Transition

A Modular RANS Approach for Modeling Hypersonic Flow Transition on an Air-Breathing Configuration

Modelling Flow Transition in a Hypersonic Boundary Layer with Reynolds-averaged Navier-Stokes Approach

Hypersonic boundary layer flow and heat transfer analysis of compressible fluid over a permeable wall with gas injection

A Modular Rans Approach for Modeling Hypersonic Flow Transition on A Scramjet-Forebody Configuration

Gas Kinetic Scheme Coupled with High-Speed Modifications for Hypersonic Transition Flow Simulations

An improved local correlation-based intermittency transition model appropriate for high-speed flow heat transfer

Hypersonic Boundary Layer Transition and Heat Loading

Modeling Supersonic and Hypersonic Flow Transition over Three-Dimensional Bodies

Improved K-Ω-γ Transition Model by Introducing the Local Effects of Nose Bluntness for Hypersonic Heat Transfer

Transition Prediction for Scramjet Intakes Using the γ-Re_θ_t Model Coupled to Two Turbulence Models

An improved physics-informed transition-turbulence model for asymmetric transition over supersonic rotating projectiles

Numerical Investigation of Radiative Transfers Interactions with Material Ablative Response for Hypersonic Atmospheric Entry

Hypersonic wave wall flow based on gas kinetic method

An implicit coupling framework for numerical simulations between hypersonic nonequilibrium flows and charring material thermal response in the presence of ablation