Abstract:Here, we describe a system for measuring triple oxygen and hydrogen isotopic ratios of both the liquid and vapour during evaporation of water in a dry gas stream (N2 or dry air) at constant temperature and relative humidity (RH).&#160; The hardware consists of a polymer glove box (COY), peristaltic pump (Ismatec), and Picarro L2140-i cavity ring-down laser spectrometer (CRDS) with Standard Delivery Module (SDM). Liquid water from the evaporation pan is sampled via a closed recirculating loop and syringe pump that delivers a constant rate of water to the vaporizer, maintaining a constant concentration of water vapour in the cell (20,000 &#177;103, 1 s.d.) over an injection cycle. Liquid measurements alternate with vapour from the glove box which is introduced to the CRDS using a diaphragm gas pump. Important for high-precision measurements, both cavity pressure and outlet valve stability are maintained throughout the liquid injection and subsequent vapour phase. Experiments are bookended by two in-house standards which are calibrated to the SMOW-SLAP scales. An additional drift corrector is introduced periodically.&#160;To test the precision and stability of the liquid injections, we sampled from an isotopically homogeneous volume of water and introduced it to the cavity over a period of ~48h. To minimise the standard deviation derived from noise, we chose an optimum integration time of ~2000s (~33 minutes) based on &#963;Allan minimisation. Therefore, for combined liquid-vapour experiments we use an injection/vapour sampling window of 40-minutes (140ug water is consumed per injection), which provides a data collection period of 33-minutes after a 7-min waiting time for equilibration.&#160;Across a single liquid injection, the mean standard error for d17O, d18O, and dD is 0.008&#8240;, 0.007&#8240;, and 0.02&#8240;, respectively. For the vapour phase equivalent, the mean standard error for d17O, d18O, and dD is 0.01&#8240;, 0.009&#8240;, 0.03&#8240; respectively. For the d-excess in the liquid and the vapour across one 33-minute cycle, the standard error is 0.07&#8240; and 0.08&#8240;, respectively. For the O17-excess in the liquid and the vapour across one 33-minute cycle, the standard error is 6 per meg and 8 per meg, respectively.&#160;A single evaporation experiment produces in excess of 100,000 measurements each of d17O, d18O, and dD for both the evaporating liquid and resulting vapour. These measurements result in 95% confidence limits for the slope of ln(d17O+1) vs ln(d18O+1) of &#177;0.0002 and &#177;0.0003 for the liquid and vapour, respectively.&#160; For the slope of ln(dD+1) vs ln(d18O+1) we obtain a 95% confidence interval of &#177;0.001 and &#177;0.002 for the liquid and vapour, respectively. The experimental method permits measurement of fractionation of triple oxygen and hydrogen isotopes of water under varying experimental conditions (e.g., RH, temperature, turbulence) at very high precision. It will be useful for testing numerical models of evaporation and conducting experiments to simulate evaporation and isotopic equilibration in natural systems. An application to closed-basin lakes will be presented.

A membrane inlet laser spectrometer for in situ measurement of triple water isotopologues

A continuous stream flash evaporator for the calibration of an IR cavity ring down spectrometer for isotopic analysis of water

A New Isobaric Water Sampler with the Function of Adaptive Recompression

A New Deep-Sea Gas-Tight Isobaric Water Sampler

Continuous and simultaneous measurement of triple oxygen and hydrogen isotopes of liquid and vapour during evaporation

Water isotopic ratios from a continuously melted ice core sample

High-Precision and Real-Time Measurement of Water Isotope Ratios Based on a Mid-Infrared Optical Sensor

High-Temporal-Resolution In Situ Sensor for Oceanic CO2 Isotope Measurement Enabling Multidimensional Isotope Tracing Analysis (R13C, R18O, and R17O) via Laser Absorption Spectroscopy

Measurement of the D/H, 18O/16O, and 17O/16O Isotope Ratios in Water by Laser Absorption Spectroscopy at 2.73 μm

Development of a compact tunable diode laser absorption spectroscopy based system for continuous measurements of dissolved carbon dioxide in seawater

Measurement of Δ18o, Δ17o, and 17O-Excess in Water by Off-Axis Integrated Cavity Output Spectroscopy and Isotope Ratio Mass Spectrometry

An Economical Tunable-Diode Laser Spectrometer for Fast-Response Measurements of Water Vapor in the Atmospheric Boundary Layer

A Deep-Ocean Mass Spectrometer to Monitor Hydrocarbon Seeps and Pipelines

Development and Metrological Characterization of a Tunable Diode Laser Absorption Spectroscopy (TDLAS) Spectrometer for Simultaneous Absolute Measurement of Carbon Dioxide and Water Vapor

In Situ Water Quality Monitoring Using an Optical Multiparameter Sensor Probe

Online Differential Thermal Isotope Analysis of Hydration Water in Minerals by Cavity Ringdown Laser Spectroscopy

Measurement of oxygen and hydrogen isotopic ratios of speleothem fluid inclusion water using Picarro

A sandwich temperature control membrane inlet mass spectrometer for dissolved gases and volatile organic compounds in aqueous solution

Simultaneous diode-laser-based in situ measurement of liquid water content and oxygen mole fraction in dense water mist environments

Optimization of a Picarro L2140-i cavity ring-down spectrometer for routine measurement of triple oxygen isotope ratios in meteoric waters

Comprehensive, Continuous, and Vertical Measurements of Seawater Constituents with Triple-Field-of-View High-Spectral-Resolution Lidar