Abstract:Purpose The design and optimization of centrifugal blood pumps are crucial for improved extracorporeal membrane oxygenation system performance. Secondary flow passages are common in centrifugal blood pumps, allowing for a high volume of unstable flow. Traditional design theory offers minimal guidance on the design and optimization of centrifugal blood pumps, so it's critical to understand how design parameter variables affect hydraulic performance and hemocompatibility. Methods Computational fluid dynamics (CFD) was employed to investigate the effects of blade number, blade wrap angle, blade thickness, and splitters on pressure head, hemolysis, and platelet activation state. Eulerian and Lagrangian features were used to analyze the flow fields and hemocompatibility metrics such as scalar shear stress, velocity distribution, and their correlation. Results The equalization of frictional and flow losses allow impellers with more blades and smaller wrap angles to have higher pressure heads, whereas the trade-off between the volume of high scalar shear stress and exposure time allows impellers with fewer blades and larger blade wrap angles to have a lower HI; there are configurations that increase the possibility of platelet activation for both number of blades and wrap angles. The hydraulic performance and hemocompatibility of centrifugal blood pumps are not affected by blade thickness. Compared to the main blades, splitters can improve the blood compatibility of a centrifugal blood pump with a small reduction in pressure head, but there is a trade-off between the length and location of the splitter that suppresses flow losses while reducing the velocity gradient. According to correlation analysis, pressure head, HI, and the volume of high shear stress were all substantially connected, and exposure time had a significant impact on HI. The platelet activation state was influenced by the average scalar shear stress and the volume of low velocity. Conclusion The findings reveal the impact of design variables on the performance of centrifugal blood pumps with secondary flow passages, as well as the relationship between hemocompatibility, hydraulic performance, and flow characteristics, and are useful for the design and optimization of this type of blood pump, as well as the prediction of clinical complications.

Improving the hemocompatibility of centrifugal mechanical circulatory support devices at low flow rates

Evaluation of the Hemolysis and Fluid Dynamics of a Ventricular Assist Device under the Pulsatile Flow Condition

CFD analysis of the HVAD's hemodynamic performance and blood damage with insight into gap clearance

Blood Pump Design Variations and Their Influence on Hydraulic Performance and Indicators of Hemocompatibility

Design and evaluation of a pulsatile flow rotary vane blood pump

Computational fluid dynamics analysis of blade tip clearances on hemodynamic performance and blood damage in a centrifugal ventricular assist device

Design and Hemocompatibility Analysis of a Double-Suction Injection Suspension Blood Pump Using Computational Fluid Dynamics Methods.

Computational characterization of flow and blood damage potential of the new maglev CH-VAD pump versus the HVAD and HeartMate II pumps

Hemocompatibility and hemodynamic comparison of two centrifugal LVADs: HVAD and HeartMate3

Design Improvement for Interventional Blood Pumps Based on Flow Analysis

Applications of CFD Technique in the Design and Flow Analysis of Implantable Axial Flow Blood Pump

Numerical solution for blood flow in a centrifugal ventricular assist device

Investigation of the influence of blade configuration on the hemodynamic performance and blood damage of the centrifugal blood pump

Numerical and in Vitro Experimental Investigation of the Hemolytic Performance at the Off-Design Point of an Axial Ventricular Assist Pump

NUMERICAL DESIGN OF A PARTIAL-SUPPORT AXIAL BLOOD PUMP

Computational Fluid Dynamics-Based Hydraulic and Hemolytic Analyses of a Novel Left Ventricular Assist Blood Pump.

Hydrodynamic and Hemolysis Analysis on Distance and Clearance Between Impeller and Diffuser of Axial Blood Pump

Evaluation and Optimization of Interventional Blood Pump Based on Hydraulic Performances and Hemocompatibility Performances

Design optimization of an axial blood pump with computational fluid dynamics.

Numerical assessment of hemodynamic perspectives of a left ventricular assist device and subsequent proposal for improvisation

Optimization of a centrifugal blood pump designed using an industrial method through experimental and numerical study