Abstract:The post-flame oxidation rate of ammonia was investigated in a novel atmospheric pressure flow reactor at temperatures of 1280 ± 16 K and as a function of residence time and mixture composition (1-10% O 2 , dry and moist). The experimental results, as well as selected data from literature, were analyzed using an updated detailed chemical kinetic model. The medium temperature, very lean conditions enhance the importance of reactions of the nitroxyl (HNO) intermediate. High-level theory was used to calculate the rate constant for HNO + NH 2 , indicating that this step is significantly faster than values used in literature. Furthermore, a trajectory based approach was used to determine collision efficiencies for selected bath gases for HNO + M. The experimental results show that the NH 3 oxidation rate increases with temperature and O 2 concentration, while the presence of water vapor slightly inhibits reaction. Formation of NO and N 2 O was strongly promoted at higher levels of O 2 . Modeling results agreed well with the measurements, except at the lowest level of O 2 . The predicted oxidation rate of NH 3 was shown to result from a delicate balance between chain branching and terminating steps involving NH 2 , H 2 NO, and HNO. Recent theoretical work on reactions of these species by Klippenstein and coworkers and Stagni et al. was instrumental in improving modeling predictions. After initiation, NO reached a pseudo-steady-state level, where the pathways to NO were largely balanced by the NH 2 + NO reaction. Nitric oxide was partly oxidized to NO 2 , with the NH 2 + NO 2 reaction responsible for most of the N 2 O formation. Novelty and significance statement: This study provides the first detailed kinetic analysis of the lean post-flame oxidation of ammonia, based on time-resolved flow reactor data in a novel reactor. In addition to the post-flame oxidation rate of ammonia, data for formation of NO and N 2 O were compared with modeling predictions. The medium temperature, very lean conditions enhance the importance of reactions of the HNO and H 2 NO intermediates. Inclusion in the model of results from recent high-level theoretical work, including present calculations for HNO + NH 2 and HNO + M, was crucial for capturing the observed behavior. It is argued that the post-initiation steady-state NH 3 oxidation rates constitute important data for model validation, along with ignition delays and laminar flame speeds.

The discovery of non-equilibrium kinetic sequences important to ammonia/co-fuel and propellant flames

Enhancement of the Ammonia Kinetic Mechanism for Nitrogen-Based Pollutant Chemistry

An improved particle swarm algorithm-based method for kinetic modeling study of ammonia/air laminar flame speed

Chemical-Diffusive Models for Flame Acceleration and Transition to Detonation: Genetic Algorithm and Optimization Procedure

A simplified chemical kinetic model with a reaction mechanism based on a multidimensional average error iteration method for ammonia and ammonia/hydrogen combustion

Numerical simulation of ammonia/methane/air combustion using reduced chemical kinetics models

Evaluation of flamelet-based models for liquid ammonia combustion in a temporally evolving mixing layer

Experimental and Kinetic Modeling Study of Laminar Burning Velocities of NH3/air, NH3/H2/air, NH3/CO/air and NH3/CH4/air Premixed Flames

Towards Predictive Combustion Kinetic Models: Progress in Model Analysis and Informative Experiments

Identification of well-parameterised reaction steps in detailed combustion mechanisms – A case study of ammonia/air flames

Evaluation of models for the low temperature combustion of alkanes through interpretation of pressure-temperature ignition diagrams

An optimized model for ammonia/syngas combustion

Reactive molecular dynamics simulation and chemical kinetic modeling of ammonia/methane co-combustion

Experimental and Kinetic Modeling Study of Laminar Burning Velocities of NH3/syngas/air Premixed Flames

An experimental, theoretical, and kinetic modeling study of post-flame oxidation of ammonia

Simulation study on combustion reaction mechanism and heat release rate of ammonia/methane fuels

Kinetic Modeling of the Thermal Decomposition of Ammonia

Theoretical Kinetics Predictions for Reactions on the NH2O Potential Energy Surface

Exploring reaction mechanism for ammonia/methane combustion via reactive molecular dynamics simulations

Experimental and chemical kinetic study for the combustion of ammonia-hydrogen mixtures

Toward Machine Learned Highly Reduce Kinetic Models For Methane/Air Combustion