Abstract:High-capacity silicon (Si) anodes in lithium-ion batteries require functional binders to accommodate the dramatic volume change and to improve the long-term stability during the charge/discharge cycles. Herein, a physically cross-linked hydrogen-bonded polymeric complex is reported and employed as an efficient binder for high-performance Si anodes. Composed of a blend of two commercially available polymers, poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO), the proposed PAA–PEO binders are synthesized via the solution mixing process. It is revealed that PEO brings in better elasticity and ionic conductivity, but at the expense of lower adhesion properties. With an optimized composition, the PAA–PEO binders show better cycling performance for Si anodes than the pure PAA binder. This study would provide insights for the design of low-cost and efficient binder for electrode materials with huge volume changes.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01849.The characterization of as-received Si particles (Figure S1); rheology analysis of the PAA–PEO composites (Figure S2); two force–distance curves measured by an AFM Si probe (Figure S3); cycling performance of the Si electrode with PAA–PEO15 binder (Figure S4); charge–discharge curves from the first to 100th cycle of varous electrodes (Figure S5); equivalent circuit for stimulation (Figure S6); cyclic voltammetry profile of Si electrodes with different binders (Figure S7); SEM images of Si electrodes with different binders at high magnification (Figure S8) (PDF)This article has not yet been cited by other publications.

On-Site Cross-Linking of Polyacrylamide to Efficiently Bind the Silicon Anode of Lithium-Ion Batteries

A Robust Network Binder Via Localized Linking by Small Molecules for High-Areal-capacity Silicon Anodes in Lithium-Ion Batteries

Epoxy Cross-Linking Enhanced the Toughness of Polysaccharides As a Silicon Anode Binder for Lithium-Ion Batteries.

Epoxy and Amide Crosslinked Polarity Enhanced Polysaccharides Binder for Silicon Anode in Lithium-Ion Batteries

Partially Carbonized Polymer Binder with Polymer Dots for Silicon Anodes in Lithium-Ion Batteries.

In Situ Crosslinked Pva-Pei Polymer Binder for Long-Cycle Silicon Anodes in Li-Ion Batteries

A highly crosslinked polymeric binder for silicon anode in lithium-ion batteries

Interpenetrated Gel Polymer Binder for High-Performance Silicon Anodes in Lithium-Ion Batteries

Design Of High-Energy-Dissipation, Deformable Binder For High-Areal-Capacity Silicon Anode In Lithium-Ion Batteries

A Semi-fluid Multi-functional Binder for High-performance Silicon Anode of Lithium-Ion Batteries

An Elastic Cross-Linked Binder for Silicon Anodes in Lithium-Ion Batteries with a High Mass Loading

Polyacrylic acid and β-cyclodextrin polymer cross-linking binders to enhance capacity performance of silicon/carbon composite electrodes in lithium-ion batteries

An in situ thermal cross-linking binder for silicon-based lithium ion battery

Preparation of an Amorphous Cross-Linked Binder for Silicon Anodes

A Physically Cross-Linked Hydrogen-Bonded Polymeric Composite Binder for High-Performance Silicon Anodes

A Flexible and Conductive Binder with Strong Adhesion for High Performance Silicon‐Based Lithium‐Ion Battery Anode

Highly Energy‐Dissipative, Fast Self‐Healing Binder for Stable Si Anode in Lithium‐Ion Batteries

ne crosslinked poly ( acrylic acid sodium ) as a polymeric binder for high performance silicon anodes in lithium ion batteries †

Water-Soluble Conductive Composite Binder for High-Performance Silicon Anode in Lithium-Ion Batteries

Inorganic crosslinked supramolecular binder with fast Self-Healing for high performance silicon based anodes in Lithium-Ion batteries

A nature-inspired binder with three-dimensional cross-linked networks for silicon-based anodes in lithium-ion batteries