The effect of sintering process on lithium ionic conductivity of Li 6.4 Al 0.2 La 3 Zr 2 O 12 garnet produced by solid-state synthesis

Wenjuan Xue,Yaping Yang,Qiaoling Yang,Yuping Liu,Lian Wang,Changguo Chen,Renju Cheng

DOI: https://doi.org/10.1039/c8ra01329b

IF: 4.036

2018-01-01

RSC Advances

Abstract:The synergistic effects of Li concentration and relative density determined the Li + ionic conductivity.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Effect of Lithium Content and Sintering Time on Conductivity of Li7La3Zr2O12 as Solid Electrolyte

Mian HUANG,ALEXNDRE Dumon,Yang SHEN,Cewen NAN

DOI: https://doi.org/10.7521/j.issn.0454-5648.2013.08.03

2013-01-01

Abstract: As a solid electrolyte, Li7La3Zr2O12 in garnet structure exhibits a great ionic conductivity at room temperature. In this work, the effects of lithium content in the raw materials and sintering time were investigated via the conventional solid-state reaction. The results show that the cubic garnet structure is obtained for all the samples with different lithium contents in the raw materials. When there is–3%deficiency of lithium in the raw materials, the highest ionic conductivity of 2.11 × 10–4 S/cm is obtained. For the mixed raw materials without excessive lithium content, the ionic conductivity reaches the highest value of 2.03 × 10–4 S/cm when sintered for 30 hours. The results indicate that Li7La3Zr2O12 has a great potential in the application of all-solid-state lithium ion batteries as solid electrolyte materials.
Effects of Li Source on Microstructure and Ionic Conductivity of Al-Contained Li6.75la3zr1.75ta0.25o12 Ceramics

Yaoyu Ren,Hui Deng,Rujun Chen,Yang Shen,Yuanhua Lin,Ce-Wen Nan

DOI: https://doi.org/10.1016/j.jeurceramsoc.2014.09.007

IF: 5.7

2015-01-01

Journal of the European Ceramic Society

Abstract:Cubic garnet-type Al-contained Li6.75La3Zr1.75Ta0.25O12 (Al-LLZTO) ceramics were prepared by conventional solid-state reaction using either Li2CO3 or LiOH·H2O as Li source. The effects of Li source on the lithium ionic conductivity of Al-LLZTO ceramics were systematically investigated by comparing the synthesis processes and characteristics of the mother powders and the microstructures of the sintered pellets made with different Li sources. Different calcination processes of the raw materials mixtures with different Li sources are revealed by thermogravimetry-differential scanning calorimetry investigation. The mother powder derived from LiOH·H2O is of higher sintering activity than those made from Li2CO3 at the same calcination temperature. For the LiOH·H2O-derived pellets, higher relative density and enhanced lithium-ion conductivity is achieved at a much lower sintering temperature of 1100°C as compared with Li2CO3-derived pellets. The highest conductivity obtained at room temperature is 9.28×10−4Scm−1, which is the highest value reported to date for the same Ta doping level.
Effects of Al concentration on the structure and conductivity of lithium lanthanum zirconium oxide

Alexandra C. Moy,Alicia Manjón-Sanz,Tori C. Caracciolo,Maxim V. Lobanov,Gabriel M. Veith,Jeff Sakamoto

DOI: https://doi.org/10.1039/d4ta04862h

IF: 11.9

2024-01-01

Journal of Materials Chemistry A

Abstract:New structural contributions to conductivity in cubic Li 7−3 x Al x La 3 Zr 2 O 12 and differences in conductivity controlling mechanisms between different substitution types are revealed.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Sintering Behavior of Garnet‐type Li6.4La3Zr1.4Ta0.6O12 in Li2CO3 Atmosphere and Its Electrochemical Property

Zeya Huang,Kai Liu,Linhui Chen,Yirui Lu,Yutao Li,Chang-An Wang

DOI: https://doi.org/10.1111/ijac.12735

2017-01-01

International Journal of Applied Ceramic Technology

Abstract:The garnet-type solid Li-ion conductor, Li6.4La3Zr1.4Ta0.6O12, is viewed as a promising solid-state electrolyte for the next-generation high-performance Li-ion battery because of its high ionic conductivity and stability. The previous researches, in order to avoid Li volatilization loss during solid-state reaction of sintering, mother powder with the same composition as green bodies was usually used to cover the samples, it would waste the expensive raw materials and increase the fabrication cost. In this study, a new method was proposed to prepare the Li6.4La3Zr1.4Ta0.6O12 ceramic solid-state electrolyte where the Li loss is compensated by the outside Li2CO3. Samples prepared by this method have pure garnet phase and compact micromorphology with few pores. These samples have a high Li-ion conductivity of 2.9x10(-4) S/cm and a low activation energy of 0.37eV at room temperature. The electronic conductivity is 1.08x10(-8) S/cm, which can be neglected for solid-state electrolyte.
Influence of sintering atmosphere on the phase, microstructure, and lithium-ion conductivity of the Al-doped Li7La3Zr2O12 solid electrolyte

Xinyu Ping,Qian Zheng,Bin Meng,Wu Lin,Yingquan Chen,Congcong Fang,Han Zhang,Wenke Liang

DOI: https://doi.org/10.1016/j.ceramint.2022.05.176

IF: 5.532

2022-09-15

Ceramics International

Abstract:Al-doped Li7La3Zr2O12 (Al–LLZO) solid electrolytes were sintered at 1150 °C for 8 h in atmosphere of oxygen, argon and air (named as Al–LLZO–O2, Al–LLZO–Ar and Al–LLZO–Air, respectively). All the Al–LLZO samples exhibited a single cubic garnet-type structure. The sample of Al–LLZO–O2 possessed the highest relative density (95.60%) and the largest average grain size among the three Al–LLZO samples. Furthermore, owing to its high relative density and small number of grain boundaries, Al–LLZO–O2 demonstrated a higher lithium-ion conductivity than Al–LLZO–Ar and Al–LLZO–Air.

materials science, ceramics
Microstructure and ion conductivity of Al‐LLZO solid electrolyte prepared by molten salt and cold sintering process

Ying Zhang,Andong Liu,Zongmo Shi,Siyu Ge,Junzhan Zhang

DOI: https://doi.org/10.1111/ijac.13873

2021-09-14

International Journal of Applied Ceramic Technology

Abstract:Li7La3Zr2O12 as a feasible solid electrolyte in all-solid-state batteries owns a highly active area of research due to the high Li+ conductivity and the high stability against the metallic Li. The Li6.25Al0.25La3Zr2O12 powders were synthesized by using the molten salt method to reduce calcination temperature. And cold sintering was served to densify the powders and obtain the solid-state electrolyte, which could remedy the shortcoming of the conventional sintering. The influence of cold sintering temperature and holding time on the microstructures and electrochemical properties of Li6.25Al0.25La3Zr2O12 electrolyte were explored. The cubic block grains were observed which played a sufficient impact on the ionic conductivity. The results showed that the density and Li+ conductivity of Li6.25Al0.25La3Zr2O12 solid electrolyte up to 3.31 g cm−3 and 9.13 μS cm−1 respectively. This work deepens the understanding of solid electrolytes prepared by Cold sintering process and shows the potential of this technology in terms of electrolytes preparation.This article is protected by copyright. All rights reserved

materials science, ceramics
The effect of Y doping on the bottleneck size, microstructure and ionic conductivity of Li6.4Fe0.2La3-xYxZr2O12 solid electrolytes

Shichang Guo,Yuan Li,Hong Zhang,Zhenzhu Cao,Liying Wang,Guorong Li

DOI: https://doi.org/10.1016/j.ceramint.2023.10.133

IF: 5.532

2023-10-01

Ceramics International

Abstract:The potential of Li7La3Zr2O12 (LLZO) as a solid electrolyte material for all-solid-state batteries is widely recognized. The bottleneck size of Li ion migration and the microstructure greatly affect the ionic conductivity of LLZO. This study aims to examine the impact of Y doping on the crystal structure, microstructure, and ionic conductivity of Fe-modified LLZO ceramic. X-ray diffraction analysis reveals that Y doping shrinks the bottleneck size and lattice constant. SEM results demonstrate that the incorporation of Y not only suppresses the abnormal grain growth but also improves the densification of Fe modified LLZO ceramic. The optimal bottleneck size (1.8441 Å) and a dense microstructure (relative density of 94.02 %) Li6.4Fe0.2La2.925Y0.075Zr2O12 result in an ionic conductivity of 5.56 × 10−4 S/cm and an activation energy of 0.258 eV at 30 °C.

materials science, ceramics
Effect of Sintering Process on Ionic Conductivity of Li7-xLa3Zr2-xNbxO12 (x = 0, 0.2, 0.4, 0.6) Solid Electrolytes

Lei Ni,Zhigang Wu,Chuyi Zhang

DOI: https://doi.org/10.3390/ma14071671

2021-03-29

Abstract:Garnet-type Li7La3Zr2O12 (LLZO) is considered as a promising solid electrolyte. Nb-doped LLZO ceramics exhibit significantly improved ion conductivity. However, how to prepare the Nb-doped LLZO ceramics in a simple and economical way, meanwhile to investigate the relationship between process conditions and properties in Li7-xLa3Zr2-xNbxO12 ceramics, is particularly important. In this study, Li7-xLa3Zr2-xNbxO12 (LLZNxO, x = 0, 0.2, 0.4, 0.6) ceramics were prepared by conventional solid-state reaction. The effect of sintering process on the structure, microstructure, and ionic conductivity of LLZNxO (x = 0, 0.2, 0.4, 0.6) ceramics was investigated. Due to the more contractive Nb-O bonds in LLZNxO ceramics, the cubic structures are much easier to form and stabilize, which could induce the decreased preparation time. High-performance garnet LLZNxO ceramics can be obtained by optimizing the sintering process with lower calcining temperature and shorter holding time. The garnet samples with x = 0.4 calcined at 850 °C for 10 h and sintered at 1250 °C for 4 h exhibit the highest ionic conductivity of 3.86 × 10-4 S·cm-1 at room temperature and an activation energy of 0.32 eV, which can be correlated to the highest relative density of 96.1%, and good crystallinity of the grains.
Effect of Sintering on Structural Modification and Phase Transition of Al-Substituted LLZO Electrolytes for Solid State Battery Applications

K. Ganesh Kumar,P. Balaji Bhargav,C. Balaji,Ahmed Nafis,K. Aravinth,P. Ramasamy

DOI: https://doi.org/10.1115/1.4049573

IF: 2.323

2021-01-28

Journal of Electrochemical Energy Conversion and Storage

Abstract:Abstract Owing to high lithium ion conductivity and good stability with lithium metal, Li7La3Zr2O12 (LLZO—a solid electrolyte) has emerged as a viable candidate for solid-state battery applications. In the current study, Al-substituted LLZO (Al-LLZO) powder is synthesized using a typical solid-state reaction. The pellets are made with the synthesized powder and are subjected to annealing for different durations and its effect on the structural properties of the Al-LLZO is investigated in detail. Reitveld refinement of the powder X-ray diffraction pattern reveals that the sintered Al-LLZO belong to the cubic system with the Ia-3d space group at room temperature. Morphology and microstructural properties of sintered powder are analyzed using field emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM)/selected area electron diffraction (SAED), respectively. The FESEM image of LLZO pellets shows well-structured cubic grains spread evenly over on the surface after sintering. The chemical compositions of the sample are identified using energy dispersive X-ray analysis (EDAX). The surface chemistry of the prepared samples is examined by X-ray photoelectron spectroscopy (XPS), which states that the observed photoelectron signals from O 1s at about 531 eV and Li1s at 54.52 eV correspond to the Li-O bond in Al-LLZO. Raman spectra have been analyzed and the observed Raman peaks appearing at 299 cm−1, 393 cm−1, 492 cm−1, and 514 cm−1 were assigned to Eg, F2g, A1g, and F2g, respectively. Phase transformation from C-LLZO to the pyrochore LZO phase is noticed when the sample is sintered for 12 h at 1100 °C. The impedance analysis is carried out to measure the conductivity of the Al-LLZO pellet and is found to be 0.3 × 10−5 S cm−1, which is suitable for solid electrolyte applications in lithium ion batteries.

energy & fuels,electrochemistry
Effect of Sintering Temperature on Structure and Ionic Conductivity of Li7−xLa3Zr2O12−0.5x (x=0.5~0.7) Ceramics

Mian Huang,Ting Liu,Yufeng Deng,Hongxia Geng,Yang Shen,Yuanhua Lin,Ce-Wen Nan

DOI: https://doi.org/10.1016/j.ssi.2011.10.003

IF: 3.699

2011-01-01

Solid State Ionics

Abstract:Li7−xLa3Zr2O12−0.5x (LLZ) ceramics with garnet-type structure were prepared via the conventional solid-state reaction method. The results showed that the sintering temperature has a significant effect on the crystal structure and phase composition, and thus ionic conductivity, of the LLZ ceramics. The ionic conductivity at room temperature of the ceramic samples increased with the crystal structural transition from tetragonal to cubic structure, as the sintering temperature increased; and reached a value of about 3.6×10−4S/cm for the cubic LLZ sample sintered at 1230°C, but LLZ would be decomposed at 1250°C.
Effect of Calcining and Al Doping on Structure and Conductivity of Li7La3Zr2O12

Ru-Jun Chen,Mian Huang,Wen-Ze Huang,Yang Shen,Yuan-Hua Lin,Ce-Wen Nan

DOI: https://doi.org/10.1016/j.ssi.2014.07.004

IF: 3.699

2014-01-01

Solid State Ionics

Abstract:Li7La3Zr2O12 (LLZ) ceramics with a garnet-type structure were prepared via the conventional solid-state reaction through different calcining processes. The calcining time and temperature were investigated. The results showed that the ionic conductivity of LLZ samples at room temperature decreased as the calcining temperature increased. The highest conductivity of 2.48×10−4Scm−1 was obtained for the sample with the calcining process at 900°C. The amount of doping Al was also investigated, which showed different effects depending on the calcining process.
Synergetic Effect of Li-Ion Concentration and Triple Doping on Ionic Conductivity of Li7La3Zr2O12 Solid Electrolyte

Minh Hai Nguyen,Sangbaek Park

DOI: https://doi.org/10.3390/nano12172946

2022-08-26

Abstract:Li7La3Zr2O12 (LLZO) is a promising and safe solid electrolyte for all-solid-state batteries. To achieve high ionic conductivity of LLZO, stabilizing the cubic phase and reducing Li loss during the sintering process is essential. Therefore, reducing the sintering temperature, which increases the sintering time for high-density pellets, is necessary. Herein, we investigate the change in the crystal structure, morphology, and Li ionic conductivity of LLZO pellets by triple doping with Al, Ga, and Ta and modulating the variation in initial Li concentrations. Interestingly, the proportion of the conductive cubic phase increased with increasing Li stoichiometry by 1.1 times, and this tendency was further accelerated by triple doping. The synergetic effects of triple doping and Li concentration also minimized Li loss during sintering. Accordingly, it provided a high-quality LLZO pellet with good ionic conductivity (3.6 × 10-4 S cm-1) and high relative density (97.8%). Notably, the LLZO pellet was obtained using a very short sintering process (40 min). Considering that the most time-consuming step is the sintering process for LLZO, this study can provide guidelines for the fast production and commercialization of LLZO electrolytes with high ionic conductivity.
Effect of various synthesis techniques on the electrical transport properties of garnet-structured solid electrolyte materials

Anubha Sodhiya,Arun Kumar Singh,Ranveer Kumar

DOI: https://doi.org/10.1007/s12034-021-02501-7

IF: 1.878

2021-07-21

Bulletin of Materials Science

Abstract:Inorganic solid electrolyte materials have great potential to overcome the issues of conventionally used organic liquid electrolyte materials in lithium ion batteries. Garnet-structured Li7La3Zr2O12 based solid electrolyte materials having high ionic conductivity, good thermal and electrochemical stability and most importantly excellent stability with respect to lithium metal anode seems to be the most promising candidate to be applied in all solid-state lithium ion batteries. Garnet-structured electrolyte materials synthesized by conventional solid-state reaction method requires intermittent grinding and calcination steps along with sufficiently high temperature and long time for sintering. A significant amount of lithium is lost during this lengthy synthesis process, resulting in lower ionic conductivity and bulk density. Since these two factors play the most important role in the performance of an electrolyte, therefore, some other synthesis methods are required, which help in enhancing the performance of Li7La3Zr2O12 based electrolytes and also are easy to operate, ecofriendly and cost effective. Here an overview of the various synthesis methods has been provided and their feasibility for Li7La3Zr2O12 based solid electrolyte material preparation, in the context of their ionic conductivity enhancement and commercial applicability have been reviewed.

materials science, multidisciplinary
Multistep sintering to synthesize fast lithium garnets

Biyi Xu,Huanan Duan,Wenhao Xia,Yiping Guo,Hongmei Kang,Hua Li,Hezhou Liu

DOI: https://doi.org/10.1016/j.jpowsour.2015.10.084

IF: 9.2

2016-01-01

Journal of Power Sources

Abstract:A multistep sintering schedule is developed to synthesize Li7La3Zr2O12 (LLZO) doped with 0.2 mol% Al3+. The effect of sintering steps on phase, relative density and ionic conductivity of Al-doped LLZO has been evaluated using powder X-Ray diffraction (XRD), scanning electron microscopy (SEM), 27Al magic spinning nuclear magnetic resonance (NMR) spectroscopy and electrochemical impedance spectroscopy (EIS). The results show that by holding the sample at 900 °C for 6 h, the mixture of tetragonal and cubic garnet phases are obtained; by continuously holding at 1100 °C for 6 h, the tetragonal phase completely transforms into cubic phase; by holding at 1200 °C, the relative density increases without decomposition of the cubic phase. The Al-LLZO pellets after multistep sintering exhibit cubic phase, relative density of 94.25% and ionic conductivity of 4.5 × 10−4 S cm−1 at room temperature. Based on the observation, a sintering model is proposed and discussed.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Effect of Sr on the Ionic Conductivity of Ta Doped Garnet Li7La3Zr2O12 Solid Electrolyte

Muktai Aote,A. V. Deshpande,Kajal Parchake,Anuj Khapekar

2024-11-12

Abstract:A solid electrolyte having the ionic conductivity comparable to that of the conventional liquid electrolyte can be used in All Solid State Batteries. The series Li6.75+xLa3-xSrxZr1.75Ta0.25O12 (x = 0 to 0.20) was synthesized to improve the ionic conductivity of garnet Li7La3Zr2O12 (LLZO). The structural, physical and morphological investigations have been carried out for all the synthesized samples using X ray diffraction, density measurement and scanning electron microscopy respectively. The results of electrochemical analysis showed that the maximum room temperature ionic conductivity of 3.5 x 10-4 S/Cm and minimum activation energy of 0.29 eV is achieved by the 0.05 Sr ceramic sample. The DC conductivity measurement confirmed the dominance of ionic conduction in the prepared ceramic samples. The highest ionic conductivity with the minimum activation energy makes the 0.05 Sr ceramic sample a suitable choice as solid electrolyte for All Solid State Lithium Ion Batteries.

Materials Science
High Li-ion conductivity of Al-free Li7-3xGaxLa3Zr2O12 solid electrolyte prepared by liquid-phase sintering

Maoyi Yi,Tao Liu,Jingyun Li,Cheng Wang,Yangcheng Mo,Xiangnan Wang,Ying Wei

DOI: https://doi.org/10.1007/s10008-019-04225-5

IF: 2.747

2019-02-25

Journal of Solid State Electrochemistry

Abstract:Ga-doped Li7La3Zr2O12 (Ga-LLZO) is a promising solid electrolyte because it shows higher Li-ion conductivity than LLZO doped with other cations. In this work, Ga-LLZO was prepared by a conventional solid-state reaction and sintered in ZrO2 crucibles to avoid introducing Al into the samples. The particle size distribution, phase structure, morphology, ionic conductivity, and bulk density of the samples were characterized by laser diffraction particle size analyzer, X-ray diffraction (XRD), scanning electron microscope (SEM), AC impedance, and Archimedes method, respectively. The effects of sintering temperature and dopant content on Li-ion conductivity and density were investigated. As for Al-free Li6.4Ga0.2La3Zr2O12, the Li-ion conductivity and bulk density are improved with the sintering temperature rise. But when the sintering temperature is 1250 °C, the Li-ion conductivity and bulk density decline. As for Al-free Li7-3xGaxLa3Zr2O12, the tetragonal phase disappears completely when x ≥ 0.15. The Li-ion conductivity and bulk density of Al-free Li7-3xGaxLa3Zr2O12 are improved with an increase of x (x ≤ 0.2). The ionic conductivity of Al-free Li7-3xGaxLa3Zr2O12 sintered in the air by liquid-phase sintering is close to Ga-LLZO sintered in dry O2 atmosphere. Li6.4Ga0.2La3Zr2O12 sintered at 1200 °C shows the highest Li-ion conductivity of 1.5 × 10−3 S/cm at 30 °C, and the activation energy is about 0.28 eV.

electrochemistry
Clarifying the Dopant Local Structure and Effect on Ionic Conductivity in Garnet Solid-State Electrolytes for Lithium-Ion Batteries

Sundeep Vema,Astrid H Berge,Supreeth Nagendran,Clare P Grey

DOI: https://doi.org/10.1021/acs.chemmater.3c01831

2023-11-14

Abstract:The high Li-ion conductivity and wide electrochemical stability of Li-rich garnets (Li7La3Zr2O12) make them one of the leading solid electrolyte candidates for solid-state batteries. Dopants such as Al and Ga are typically used to enable stabilization of the high Li+ ion-conductive cubic phase at room temperature. Although numerous studies exist that have characterized the electrochemical properties, structure, and lithium diffusion in Al- and Ga-LLZO, the local structure and site occupancy of dopants in these compounds are not well understood. Two broad 27Al or 69,71Ga resonances are often observed with chemical shifts consistent with tetrahedrally coordinated Al/Ga in the magic angle spinning nuclear magnetic resonance (MAS NMR) spectra of both Al- and Ga-LLZO, which have been assigned to either Al and/or Ga occupying 24d and 96h/48g sites in the LLZO lattice or the different Al/Ga configurations that arise from different arrangements of Li around these dopants. In this work, we unambiguously show that the side products γ-LiAlO2 and LiGaO2 lead to the high frequency resonances observed by NMR spectroscopy and that both Al and Ga only occupy the 24d site in the LLZO lattice. Furthermore, it was observed that the excess Li often used during synthesis leads to the formation of these side products by consuming the Al/Ga dopants. In addition, the consumption of Al/Ga dopants leads to the tetragonal phase formation commonly observed in the literature, even after careful mixing of precursors. The side-products can exist even after sintering, thereby controlling the Al/Ga content in the LLZO lattice and substantially influencing the lithium-ion conductivity in LLZO, as measured here by electrochemical impedance spectroscopy.
High Li ion conductivity in strontium doped Li7La 3Zr2O12 garnet

Alexandre Dumon,Mian Huang,Yang Shen,Cewen Nan

DOI: https://doi.org/10.1016/j.ssi.2013.04.016

IF: 3.699

2013-01-01

Solid State Ionics

Abstract:Strontium doped lithium ion garnets Li7La3Zr2O12 (LLZ) with 0.9wt% to 8.4wt% content of added Sr were synthesized via conventional solid-state reaction. X-ray diffraction patterns confirmed the cubic garnet structure of the sintered samples. A small amount of strontium was substituted to lanthanum in LLZ lattice. Further analysis showed SrCO3 acted as a sintering aid for cubic LLZ ceramics and significantly increased the grain size of the sintered pellets. A conductivity of 2.10×10−4S/cm at 297K was obtained for the undoped LLZ. The total ionic conductivity reached a maximum of about 5×10−4S/cm at 297K with an activation energy of about 0.31eV for 1.7wt% Sr added LLZ sintered for 20–24h in alumina crucible.
Key factors of the self-consolidation mechanism for sintering Li7La3Zr2O12 solid electrolytes

Meng Liu,Haiyang Chen,Songtong Zhang,Guangqi Li,Bin Li,Yuehua Wen,Jingyi Qiu,Junhong Chen,Pengcheng Zhao

DOI: https://doi.org/10.1016/j.jpowsour.2022.232447

IF: 9.2

2023-02-01

Journal of Power Sources

Abstract:Li7La3Zr2O12 (LLZO) is a potential solid electrolyte for all-solid-state batteries owing to its high ionic conductivity and excellent stability. The self-consolidation strategy is an extremely simplified method for LLZO preparation compared to the conventional preparation methods using hot- or cold-pressing operations. Despite the absence of high-pressure assistance, the self-consolidated LLZO exhibits high density and enhanced microstructure. The self-densification mechanism of LLZO solid electrolytes is interesting and deserves further investigation. Herein, the effects of the sintering time and the inadvertently introduced Al on the self-consolidation process are systematically studied. Extending sintering time expels the sintering voids at the grain boundaries, thereby promoting grain growth. The Li atoms in the LLZO crystal structure are rearranged and adjusted to reach an optimal state. The LLZO achieves a highly dense morphology with a Li+ ion conductivity of 3.87 × 10−4 S cm−1 when the sintering time is 20 h. Notably, an Al2O3 crucible, instead of a MgO crucible, under the same sintering conditions, contributes to the LLZO self-consolidation by generating an Al-containing solid solution. This work sheds light on the key role of the solid solutions in LLZO self-consolidation, thereby inspiring an alternative optimization method for the preparation of solid electrolytes.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Influences of ZrO2 content on microstructural and ionic conductivity of Li1.4Al0.4Ti1.6(PO4)3 solid-state electrolytes

Shuixian Li,Fei Shang,Yi Wang,Guohua Chen

DOI: https://doi.org/10.1016/j.ssi.2024.116460

IF: 3.699

2024-03-01

Solid State Ionics

Abstract:NASICON-type electrolyte Li1.4Al0.4Ti1.6(PO4)3 attracts great attention with its high grain conductivity and stable microstructure. In this work, the Li1.4Al0.4Ti(1.6-x)Zrx(PO4)3 solid-state electrolytes were synthetized. And the influences of ZrO2 addition on microstructural evaluation and ionic conductivity of Li1.4Al0.4Ti(1.6-x)Zrx(PO4)3 were studied using powder X-ray diffraction, scanning electron microscopy and impedance spectroscopy. All synthetic samples adopted single phase LiTi2(PO4)3 with NASICON type structure. The highest ionic conductivity of 0.54 mS/cm and the minimum activation energy of 0.232 eV were achieved for x = 0.04 sample sintered at 850 °C. These results indicate that ZrO2 added Li1.4Al0.4Ti1.6(PO4)3 ceramic has a potential application in solid electrolytes.

chemistry, physical,physics, condensed matter

The effect of sintering process on lithium ionic conductivity of Li 6.4 Al 0.2 La 3 Zr 2 O 12 garnet produced by solid-state synthesis

Effect of Lithium Content and Sintering Time on Conductivity of Li7La3Zr2O12 as Solid Electrolyte

Effects of Li Source on Microstructure and Ionic Conductivity of Al-Contained Li6.75la3zr1.75ta0.25o12 Ceramics

Effects of Al concentration on the structure and conductivity of lithium lanthanum zirconium oxide

Sintering Behavior of Garnet‐type Li6.4La3Zr1.4Ta0.6O12 in Li2CO3 Atmosphere and Its Electrochemical Property

Influence of sintering atmosphere on the phase, microstructure, and lithium-ion conductivity of the Al-doped Li7La3Zr2O12 solid electrolyte

Microstructure and ion conductivity of Al‐LLZO solid electrolyte prepared by molten salt and cold sintering process

The effect of Y doping on the bottleneck size, microstructure and ionic conductivity of Li6.4Fe0.2La3-xYxZr2O12 solid electrolytes

Effect of Sintering Process on Ionic Conductivity of Li7-xLa3Zr2-xNbxO12 (x = 0, 0.2, 0.4, 0.6) Solid Electrolytes

Effect of Sintering on Structural Modification and Phase Transition of Al-Substituted LLZO Electrolytes for Solid State Battery Applications

Effect of Sintering Temperature on Structure and Ionic Conductivity of Li7−xLa3Zr2O12−0.5x (x=0.5~0.7) Ceramics

Effect of Calcining and Al Doping on Structure and Conductivity of Li7La3Zr2O12

Synergetic Effect of Li-Ion Concentration and Triple Doping on Ionic Conductivity of Li7La3Zr2O12 Solid Electrolyte

Effect of various synthesis techniques on the electrical transport properties of garnet-structured solid electrolyte materials

Multistep sintering to synthesize fast lithium garnets

Effect of Sr on the Ionic Conductivity of Ta Doped Garnet Li7La3Zr2O12 Solid Electrolyte

High Li-ion conductivity of Al-free Li7-3xGaxLa3Zr2O12 solid electrolyte prepared by liquid-phase sintering

Clarifying the Dopant Local Structure and Effect on Ionic Conductivity in Garnet Solid-State Electrolytes for Lithium-Ion Batteries

High Li ion conductivity in strontium doped Li7La 3Zr2O12 garnet

Key factors of the self-consolidation mechanism for sintering Li7La3Zr2O12 solid electrolytes

Influences of ZrO2 content on microstructural and ionic conductivity of Li1.4Al0.4Ti1.6(PO4)3 solid-state electrolytes