Abstract:Supercapacitors are gaining increasing attention for complementing or replacing batteries and they are highly desirable in applications where high power and long cycle life of energy storage devices are needed. Activated carbons (AC) are the most promising electrodes in the supercapacitor industry presenting the best performances/cost compromise. Recently, graphene, with a two dimensional carbon nanostructure, has emerged as a new class of promising electrode material in supercapacitors, due to its outstanding properties such as high electric conductivity, high surface area, good mechanical properties and chemical inertia. Among the various approaches to producing graphene materials, here we focus on reduced exfoliated graphene oxide (r-GO) derived from chemically synthesised graphene oxide (GO). However, the graphene materials prepared by either chemical or thermal reduction of the graphene oxide always exhibits a relatively low electrochemical performance due to the agglomeration of graphene sheets and does not reflect the intrinsic capacitance of an individual graphene nano-sheet. To exploit the potential electrochemical applications for graphene, a particularly attractive option is to design and develop composites of graphene with other materials. In this study, we present an approach to synthesize a composite of reduced graphene oxide (r-GO) with activated carbon and its use as an electrode material in supercapacitors. To the best of our knowledge, a few studies on the preparation of GO/AC composites have been reported so far. Graphene oxide was synthesised using vein graphite by a modified Hummers method and then mixed with activated carbon to prepare a homogeneous composite. The composite was thermally reduced to convert GO in to r-GO. The morphology and chemical structure of the materials were characterized by means of Electron microscopy, Raman spectroscopy, X-ray diffraction and Fourier Transform Infrared Spectroscopy. Thermal properties were investigated using Thermo Gravimetric Analysis. The electrochemical properties of as obtained composites with different mass ratios were investigated, together with their individual components (GO, r-GO and AC) for comparison. For electrochemical characterisation, two-electrode symmetrical supercapacitor cells were constructed and characterized by cyclic voltammetry and electrochemical impedance spectroscopy. Tetraethylammonium tetrafluoroborate (TEABF4) in Propylene Carbonate (PC) was used as the electrolyte. The CV curves were measured from 0 to 1 V with various scan rates ranging from 10 to 1000 mV s −1 and the CV data were used to calculate the specific capacitances of the electrodes. The results showed that the as-prepared composites exhibited an improved electrochemical performance as compared to pure r-GO or AC. This improvement can be attributed to the synergistic effect of AC and r-GO. The maximum specific capacitance observed for the r-GO/ AC composite was 115.6 F/g at a scan rate of 10 mV s -1 . The near-rectangular CV curves at ultrafast sweep rate of 1000 mV s -1 indicated very efficient charge transfer within the composite electrodes. The incorporation of rGO into AC, not only provides the vacancies to accommodate ions, but also forms a promising network structure to conductively bridge the spaces between the AC particles, which can facilitate rapid transport of the electrolyte ions within the electrode materials, leading to a high-rate performance of the supercapacitor. Within the composite, r-GO plays the role of both the binder and the conductive additive increasing the specific capacitance and the power density of the devices.

Electrochemical properties of PPy/rGO/NiCoFe2O4 composites as advanced electrode materials for supercapacitors: a state-of-the-art review

Iron (II and III) Oxides/Reduced Graphene Oxide/Polypyrrole Ternary Nanocomposite As Electrochemical Supercapacitor Electrode

Graphene Oxide and Activated Carbon Composites for High-Power Supercapacitors

Effect of conducting polymer-decorated Ppy@rGO hybrid electrodes with high specific capacitance and long-term stability for energy storage devices

Electrode material based on reduced graphene oxide (rGO)/transition metal oxide composites for supercapacitor applications: a review

Electrochemical Performance and Complex Impedance Properties of Reduced-Graphene Oxide/polypyrrole Nanofiber Nanocomposite

Synthesis of polypyrrole/nitrogen-doped porous carbon matrix composite as the electrode material for supercapacitors

Polyaniline/manganese nickel oxide/graphene composites as electrode materials for supercapacitors

Facile synthesis of ternary graphene nanocomposites with doped metal oxide and conductive polymers as electrode materials for high performance supercapacitors

Ethylene glycol reduced graphene oxide/polypyrrole composite for supercapacitor

Synthesis of integrated reduced graphene oxide‐polyaniline nanocomposite for enhanced supercapacitor performance

A study on the supercapacitive behaviour of SNrGO/PEDOT:PSS composite as an electrode for electrochemical supercapacitors

Unraveling the Electrochemical Insights of Cobalt Oxide/Conducting Polymer Hybrid Materials for Supercapacitor, Battery, and Supercapattery Applications

Electro-sprayed Quaternary Composite of Poly(aniline-co-pyrrole), Graphene Oxide, and Iron Oxide as an Efficient Electrode for Hybrid Supercapacitor Application

Recent Progress Using Graphene Oxide and Its Composites for Supercapacitor Applications: A Review

Synthesis of biochemically reduced graphene-oxide/Fe0 containing polyaniline ternary hybrid composite through interfacial polymerization for supercapacitors

Hydrothermally synthesized nickel ferrite nanoparticles integrated reduced graphene oxide nanosheets as an electrode material for supercapacitors

Recent Research of NiCo2O4/Carbon Composites for Supercapacitors

Nickel cobalt oxide nanowire-reduced graphite oxide composite material and its application for high performance supercapacitor electrode material.

Design and synthesis of ternary composite of polyaniline-sulfonated graphene oxide-TiO2 nanorods: a highly stable electrode material for supercapacitor

Optimisation of a ternary composite of CuFe2O4/CuO@rGO and its electrochemical evaluation as an electrode material for supercapacitor applications