Abstract:Direct methanol fuel cells (DMFCs) are attractive among advanced energy conversion technologies due to the high energy density of methanol, the overall simplicity of system and easy refueling.[1] Although they made an early market entry but did not achieve large-scale commercialization mainly because of the cost, performance and durability issues. The state-of-art DMFC systems are based on the use of Pt-Ru catalyst at the anode, Pt catalyst at the cathode, and a polymer electrolyte membrane separating the two electrodes.[2] Our present study is focused on the anode catalyst, specifically to improve its performance and durability and reduce its cost. To this end, we have examined the use of titanium oxide-ruthenium oxide solid solutions as co-catalyst supports. We have prepared Pt/Ti0.7Ru0.3O2 for use as an anode catalyst. Ti0.7Ru0.3O2 as a co-catalyst support was synthesized in a one-step hydrothermal process and then platinum was deposited using polyol method. The structure of the synthesized catalyst was investigated by XRD, SEM and EDX. Results of steady-state voltammetry suggest that the electrocatalytic activity and stability of the newly synthesized catalysts compare well with the commercially available carbon-supported Pt-Ru catalyst. The Tafel slopes suggested that the well-known bifunctional mechanism for methanol oxidation was operative on the new catalyst as well. With further optimization of this type of catalyst we expect to be able to lower the noble metal content further to enable practical use of these materials in fuel cells. References [1] S. Surampudi, S. R. Narayanan, E. Vamos, H. Frank, G. Halpert, A. LaConti, J. Kosek, G. K. Surya Prakash and GA Olah, "Advances in Direct Oxidation Methanol Fuel Cells," Journal of Power Sources, 47, 377-385 (1994) [2] Handbook of Fuel Cells, “Portable Direct Methanol Fuel Cell Systems”, S. R. Narayanan, T. I.Valdez, in Vol IV Part 1, (Eds. H. Gasteiger, A. Lamm and W. Veilstich), Wiley Interscience ( March 2003)

From photo-assisted methanol catalytic oxidation to direct methanol fuel cells: Applications of semiconductors-based electrode

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

Anode Catalysts and Cathode Catalysts of Direct Methanol Fuel Cells

Recent Progress in Anode Catalysts of Direct Methanol Fuel Cells

Recent advances in catalysts for direct methanol fuel cells

Advances in Multimetallic Anodic Catalysts for Direct Methanol Fuel Cells(dmfcs)

Direct Methanol Fuel Cells System: A Review of Dual-Role Electrocatalysts for Oxygen Reduction and Methanol Oxidation

Toward Electrocatalytic Methanol Oxidation Reaction: Longstanding Debates and Emerging Catalysts

A review on Pt-based anodic catalysts in direct methanol fuel cells

Progress in Research on Cathodic Catalysts for Direct Methanol Fuel Cells

Metal-Based Electrocatalysts for Methanol Electro-Oxidation: Progress, Opportunities, and Challenges.

Preparation and Characterization of Novel Nickel–palladium Electrodes Supported by Silicon Microchannel Plates for Direct Methanol Fuel Cells

Research and Development of Electrocatalysts Used in DMFC

High-Performance Direct Methanol Fuel Cells with Precious-Metal-Free Cathode.

An alkaline direct methanol fuel cell with a polymer fiber membrane and MnO2-catalyzed cathode

Recent advancements and prospects in noble and non-noble electrocatalysts for materials methanol oxidation reactions

High-Performance Polymer Fiber Membrane Based Direct Methanol Fuel Cell System with Non-Platinum Catalysts

Photo-responsive metal/semiconductor hybrid nanostructure: A promising electrocatalyst for solar light enhanced fuel cell reaction

Improved Catalysts for Direct Methanol Fuel Cells

A Direct Methanol Fuel Cell Without the Use of a Polymer Electrolyte Membrane or Precious Metal Cathode Catalyst

Critical materials and technology in direct methanol fuel cells