Abstract:Highly sulfonated carbon nano-onions (SP–CNOs) with large specific surface area are used as a new type of nanofiller in sulfonated poly(arylene ether sulfone) (SPAES) to construct and adjust the proton transfer channels efficiently. SP-CNOs are synthesized from nanometer diamonds via thermal annealing, phenylation and sulfonation, and characterized by XRD, XPS, BET, Raman and HRTEM. The obtained mesoporous SP-CNOs possess a large specific surface of 350 m2/g and an average pore size of 9.7 nm, which endow the nanoparticles with good dispersivity and hydrophilicity. A series of composite membranes based on SP-CNOs/SPAES are prepared through the solution casting approach and evaluated by FESEM, XRD, TGA, water uptake, proton conductivity, chemical stability and fuel cell performance. The results indicate that the composite membranes all show excellent mechanical toughness and greatly enhanced water-retention capacity, thermal, dimensional and oxidative stability due to the good interfacial compatibility and the formation of hydrogen-bond interaction between SP-CNOs and SPAES. The SPAES/SP-CNOs-1.5 membrane achieves the highest proton conductivity of 181.2 mS/cm at 90 °C, which is 45% higher than that of SPAES; H2/O2 fuel cell performance records a power density of 735 mW/cm2 at 80 °C, which is slightly better than that of Nafion® 112. In addition, the SPAES/SP-CNOs-1.5 membrane undergoes the CV decay of 0.38 mV/h after 168 h at 80 °C, which is comparable to Nafion® 112 (0.43 mV/h) but lower than that for the pristine SPAES membrane (0.54 mV/h). After the accelerated stress test, the SPAES/SP-CNOs-1.5 membrane exhibits superior cell performance and lower hydrogen crossover than the pristine SPAES membrane.

Superacid sulfated SnO2 doped with CeO2: A novel inorganic filler to simultaneously enhance conductivity and stabilities of proton exchange membrane

Enhanced Proton Conductivities of Chitosan-Based Membranes by Inorganic Solid Superacid SO42−–TiO2 Coated Carbon Nanotubes

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Hydroxypolybenzimidazole Electrolyte with Excellent Stability for High Power Density All-Solid-State Supercapacitors

CeO2 stabilized by tourmaline as a novel inorganic filler to simultaneously increase the conductivity and durability of proton exchange membranes

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Highly Proton Conductive and Mechanically Robust SPEEK Composite Membranes Incorporated with Hierarchical Metal–organic Framework/carbon Nanotubes Compound

Preparation and Properties of Chitosan/acidified Attapulgite Composite Proton Exchange Membranes for Fuel Cell Applications

Composite Proton Exchange Membranes Based on Inorganic Proton Conductor Boron Phosphate Functionalized Multi-Walled Carbon Nanotubes and Chitosan

Proton conductivity and durability of Ce-based hybrid proton exchange membranes synchronously enhanced by dual-function γ-AlOOH@Ti-supported CeO 2 composite oxide

Highly sulfonated carbon nano-onions as an excellent nanofiller for the fabrication of composite proton exchange membranes with enhanced water retention and durability

A facile, effective thermal crosslinking to balance stability and proton conduction for proton exchange membranes based on blend sulfonated poly(ether ether ketone)/sulfonated poly(arylene ether sulfone)

Study of High Performance Sulfonated Polyether Ether Ketone Composite Electrolyte Membranes

Novel bifunctional fillers (ATP/P–CNOs) for sulfonated poly(aryl ether sulfone) matrix for improved power output and durability of H2/O2 fuel cell at low humidity

Molecular-Level Modification of Sulfonated Poly(arylene ether ketone sulfone) with Polyoxovanadate-Ionic Liquid for High-Performance Proton Exchange Membranes

Enhanced Performance of Sulfonated Poly(ether ether Ketone) Hybrid Membranes by Introducing Sulfated MOF-808/Graphene Oxide Composites

Electrospinning-assisted Construction of Rapid Proton Conduction Channels in Halloysite Nanotube-Encapsulated Ionic Liquid-Embedded Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes

Preparation of Covalent-Ionically Cross-Linked UiO-66-NH2/Sulfonated Aromatic Composite Proton Exchange Membranes With Excellent Performance

Tungstophosphoric acid-doped sulfonated poly(arylene ether nitriles) composite membranes with improved proton conductivity and excellent long-term stability

Two-dimensional metal-organic framework-graphene oxide hybrid nanocomposite proton exchange membranes with enhanced proton conduction