Abstract:Shown that galvanic production, which is engaged in the application of protective or decorative coatings on metal and non-metal products (galvanizing, nickel plating, oxidation), can also be attributed to enterprises that pollute the environment with wastewater. Subject to all the norms of the technological process, despite the various methods of surface treatment of products, a certain amount of wastewater of complex composition is still formed. With an inferior degree of purification, they are one of the sources of pollution of aquatic environments. The main toxic components polluting this kind of wastewater are heavy metal ions such as chromium-6, cadmium-2, lead-2 and other toxic substances. Shown that in wastewater treatment the main place belongs to the sorption method, which uses natural sorbents such as activated carbons, zeolites, bentonite clays, and other natural materials. Searched for natural raw materials to obtain effective sorbents during decontamination of industrial effluents. The chemical-mineralogical composition of a number of deposits of aluminosilicate rocks in Azerbaijan has been studied. An analysis of the results obtained made it possible to establish the optimal variant of the synthesis of sorbents. Based on a frame-type aluminosilicate zeolite (clinoptilolite) and layered aluminosilicate (bentonite) with a high content of montmorillonite, their Na-forms were obtained. The results of the physicochemical analysis of the natural material and its modified Na-form are presented. Sorption treatment of wastewater from some heavy metal ions on modified forms of bentonite and clinoptilolite was carried out. It has been established that, in terms of sorption properties, the obtained sorbents based on natural raw materials Na-clinoptilolite and Na-bentonite can be recommended instead of synthetic industrial KU-2-8 in the sorption extraction of heavy metal ions from wastewater

Mitigating the Environmental Impact by Synthesis of Adsorbents from Aluminium-Containing Waste

Hydrodesulfurization Catalysts from Aluminium-Containing Waste

THE USE OF ALUMINOSILICATE CLAYS AS SORBENTS IN THE PURIFICATION OF MEDIA FROM HEAVY METAL IONS

Purification of wastewater from heavy metal ions using nanostructured adsorbents

Green nanomaterial-based adsorbent for Cs and Pb removal: Synthesis from industrial waste producing high-value products

Treating waste with waste: the potential of synthesized alum from bauxite waste for treating car wash wastewater for reuse

Mild Hydrothermal Synthesis of 11Å-TA from Alumina Extracted Coal Fly Ash and Its Application in Water Adsorption of Heavy Metal Ions (Cu(II) and Pb(II))

Study of the dependence of component composition - degree of wastewater purification by adsorbents based on plant raw materials to control the content of priority pollutants in water bodies

Utilizing Faujasite-type zeolites prepared from waste aluminium foil for competitive ion-exchange to remove heavy metals from simulated wastewater

ZnFe2O4 loaded on municipal waste-char: Outstanding adsorption and photocatalytic removal of contaminants

Bimetallic adsorbents for wastewater treatment: a review

Studies of Physicochemical Bases and Optimization of Environmentally Safe Technology of Lead Production Waste Recycling

Rice Husk-Based Adsorbents for Removal of Metals from Aqueous Solutions

Gas Processing Waste: Promising Raw Material for Designing the Composition of Ceramic Grinding Bodies

Optimization of Aluminum Boride Synthesis in the Self-Propagating High-Temperature Synthesis Mode to Create Waste-Free Technology

Purification of Oil-Containing Waste Using Solar Energy

Development of oil product contaminated wastewater treatment technology using sorbents based on mining waste

Facile fabrication of novel analcime/sodium aluminum silicate hydrate and zeolite Y/faujasite mesoporous nanocomposites for efficient removal of Cu(II) and Pb(II) ions from aqueous media

High-alumina slurry waste metallurgy aluminium alloys - complex modifier of heat-resistant and refractory composites

Simultaneous removal of multiple metal(loid)s and neutralization of acid mine drainage using 3D-printed bauxite-containing geopolymers

Facile Synthesis and Life Cycle Assessment of Highly Active Magnetic Sorbent Composite Derived from Mixed Plastic and Biomass Waste for Water Remediation