Abstract:In practical engineering, cyclic shear stresses induced by earthquakes, traffic, and waves are superimposed on the initial static shear stress in sand fills or deposits, leading to complex responses of soils such as their deformation characteristics, pore pressure generation, and susceptibility (or cyclic resistance) to liquefaction. To experimentally investigate the undrained cyclic response of saturated sand, a series of triaxial tests were performed, covering a broad range of initial static and cyclic deviatoric stress levels. The results indicate that different stress conditions lead to two types of cyclic behavior: cyclic mobility and residual deformation accumulation. The compressional static stress is beneficial to the cyclic resistance of the dense sand, whereas the extensional static stress is regarded as detrimental as it tended to reduce the cyclic strength. Moreover, by comparing the available test data obtained from the same sand with varying initial densities and confining pressures, the static shear effect on cyclic resistance was found to be dependent on the state of the sand. Compared to the interpretation made using the limiting pore pressure-based criterion, the conventional failure criterion using a cyclic axial strain of 5% may lead to a substantial overestimation of the cyclic resistance, thus resulting in unsafe assessment and design. Hence, by employing the pore pressure criterion, the pore pressure generated in the cyclic tests was investigated and was found to be significantly influenced by the static shear stress. A pore pressure generation model is proposed to obtain the pore pressure characteristics of sand under various static shear stress conditions.

Failure mechanisms of saturated sand under different loading frequencies: Experimental observation and constitutive modelling

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Flow Deformation and Cyclic Resistance of Saturated Loose Sand Considering Initial Static Shear Effect

Hypoplastic Model for Sand under Multidirectional Shearing Conditions Considering Fabric Change Effect

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Cyclic Failure Characteristics of Silty Sands with the Presence of Initial Shear Stress

Experimental Study on the Influence of Cyclic Loading Frequency on Liquefaction Characteristics of Saturated Sand

Effect of Cyclic Loading Frequency on Cyclic Behaviour of Saturated Sand

Mechanical Characteristics and Microstructure of Saturated Sand under Monotonic and Cyclic Loading Conditions

Experimental Study on Dynamic Characteristics of Saturated Remolded Soft Clay with Sand Particles

Cyclic Constitutive Model of Saturated Sand Based on the Bounding Surface Theory

Experimental Study on Cyclic Deformation Properties of Saturated Fujian Sand at Different Loading Frequencies

Numerical Modeling of Sand Liquefaction Behavior under Cyclic Loading

Subloading Surface Constitutive Model of Sands

Undrained Dynamical Behavior of Nanjing Flake-Shaped Fine Sand under Cyclic Loading

A bounding surface plasticity model of sand for cyclic loading analysis

Experimental and Numerical Investigations on the Mechanical Behavior of Fine-Grained Sandstone

Constitutive Model for Fluid of Post-Liquefied Sand

Effective Stress Path and Failure Pattern of Nanjing Fine Sand with Flake-Shape Structure under Vibrating Load of Rail Transit

Experimental Investigation of Liquefaction Characteristics of Saturated Coral Sand Subjected to Complex Cyclic Stress Paths: Effects of Loading Frequency

Constitutive Modelling of a Dry Sand–structure Interface under High-Frequency Vibration with a Constant Normal Load