Abstract:Multi-beam antenna is an important way to increase the channel capacity of cellular communications. It is available in two ways, one is based on optical methods, such as Luneberg lens and Rotman lens. However, the common problem with this method is that the lens size is too large or difficult to process. Another method is based on beam-forming network composed of coupler and phase shifter, such as Butler matrix. The Butler matrix has been studied for a long time, in the form of microstrip, stripline, or substrate-integrated waveguide. The substrate-integrated waveguide with low insertion loss is mainly used in the higher frequency such as millimeter wave band. The microstrip is mainly used in 4G/5G base stations, suitable for broadband design and process. Low side-lobe level, narrow beams are especially important for multi-beam base station antennas. The traditional Butler matrix is 4 x 4 Butler matrix for 4-beam base stations. However, the traditional Butler matrix can only output equal-amplitude power, with a side-lobe level higher than -13.4 dB. The beam width is too wide due to the few number of antenna. The 4 x 4 Butler Matrix with attenuator can reduce the side-lobe level, but it will increase the insertion loss of the beam-forming network. The 4 x 4 Butler matrix with phase shifter and power divider can form a 4 x 6 Butler matrix, which reduce the beam width beam and side-lobe level. However, for large-angle scanning, not only the side-lobe level, but also the grating-lobe problem caused by the wide-angle scanning and wide antenna spacing needs to be solved. The array with triangle arrangement can reduce the side-lobe and grating-lobe level. A wide-band 4-beam antenna array and beam-forming network for 4G base stations are presented in this paper. Adopting triangular arrangement, the number of antenna in sub-array is increased, and the antenna spacing is reduced, resulting in good side-lobe and grating-lobe level suppression. The output amplitude and phase errors are small over a wide band, with low insertion loss.

Beamforming Network for 5G Applications

Butler Matrix Beamforming Network Based on Substrate Integrated Technology for 5G Mobile Devices

A Low-Cost Four-Directional Beamforming Switched Butler Matrix Network Antenna for 5G NR Applications

Switched-Beam Antenna Array Based on Butler Matrix for 5g Wireless Communication

A Sidelobe-Reduced, Four-Beam Array Antenna Fed by a Modified $4\times4$ Butler Matrix for 5G Applications

Investigation on Beam Alignment of a Microstrip-Line Butler Matrix and an SIW Butler Matrix for 5G Beamforming Antennas through RF-to-RF Wireless Sensing and 64-QAM Tests

Four-Beam Antenna Array With Low Side-Lobe For Base Station Application

Recent Developments of Butler Matrix From Components Design Evolution to System Integration for 5G Beamforming Applications: A Survey

Multibeam Antenna Technologies for 5G Wireless Communications

Compact, Ultra-Wideband Butler Matrix Beamformers for the Advanced 5G Band FR3—Part I

Beam-Switching Antennas for 5G Millimeter-Wave Wireless Terminals

Microwave Photonics Beamforming for 5G

A Compact Linear Microstrip Patch Beamformer Antenna Array for Millimeter-Wave Future Communication

A Miniaturized Metamaterial-Loaded Switched-Beam Antenna Array System With Enhanced Bandwidth for 5G Applications

Four-Beam Antenna Array with Integrated Butler Matrix Feeding Network

5G Uniform Linear Arrays with Beamforming and Spatial Multiplexing at 28, 37, 64, and 71 GHz for Outdoor Urban Communication: A Two-Level Approach

Smart Small Cell with Hybrid Beamforming for 5G: Theoretical Feasibility and Prototype Results

Bioinspired planar switched beam network using Butler matrix on a flexible substrate targeting multifaceted millimeter-wave applications

Metamaterial-Inspired Flat Beamsteering Antenna for 5G Base Stations at 3.6 GHz

Beam-Switching Lens Antenna at 26ghz for 5G Communications

Design of a Broadband Millimeter-Wave Array Antenna for 5G Applications