Abstract:Friction stir welding (FSW) is a solid-state joining process used to weld dissimilar aluminum alloys with varying material properties and compositions. Unlike traditional welding methods, FSW does not involve melting the materials being welded but instead uses a rotating tool to heat and stir the materials until they are in a plastic state. The process results in a welded joint with high strength, excellent ductility, and minimal distortion, making it a popular choice in various industries, including aerospace, automotive, and marine. AA6061-T6 (Mg-Si) and AA7075 (Al-Zn-Mg-Cu) aluminum alloys are one of the most popular grades of aluminum alloys used in current manufacturing industries, such as aerospace and automotive, joined by the Friction Stir Welding Process (FSW) technique. Taguchi orthogonal array (L9) experimental design was applied to reduce the number of insignificant factors in the process. First, the study determines three welding factors: rotation speed, travel speed, and pin eccentricity. Investigations found that travel speeds significantly on tensile strength (Ts) and elongation ( %El), but the rotational speed and tool eccentricity did not affect Ts and %El. Furthermore, considering the fabricated parameters on the hardness (HV) of the joint, it was found that all factors unaffected the HV of the joint zone at a 95 % confidence level. Next, examine the microstructure; Mg2Al3 and Al2O3 intermetallic compounds were found in the weld. Therefore, investigating the crystallite size found that welding significantly affects the crystallite size. Finally, consider the fracture surface, experimental condition A2B1C2 (optimal parameter), which is the parameter with the highest tensile strength having dimple fracture characteristics. On the other hand, the welding condition A1B3C3, the parameter with the lowest tensile strength, Small and fine dimple fracture with cleavage fracture. Because the material is highly ductile and can undergo large deformations before it is damaged. On the other hand, materials with low tensile strength exhibiting cleavage fracture indicate that the materials are brittle and can break easily under stress

Prediction of optimal mild steel weld parameters using the Adaptive Neuro-Fuzzy Inference System (ANFIS) technique

Predicting the Mechanical Properties of Friction-Stir-Welded AA7068-T6 Joints Using an Adaptive Neuro-Fuzzy Inference System

An integration of RSM and ANN modelling approach for prediction of FSW joint properties in AA7178/AA5456 alloys

Finite element analysis, prediction, and optimization of residual stresses in multi-pass arc welding with experimental evaluation

An artificial intelligence system for quality level–based prediction of welding parameters for robotic gas metal arc welding

Investigating parametric effects during TIG welding of dissimilar metals

Prediction of weld strength by parametric optimization of resistance spot welding using Taguchi method

Weld bead graphical prediction of cold metal transfer weldment using ANFIS and MRA model on Matlab platform

Process parameter optimization of submerged arc welding on mild steel AISI 1020 using an artificial neural network trained with multi-objective Jaya algorithm

Prediction of properties of friction stir spot welded joints of AA7075-T651/Ti-6Al-4V alloy using machine learning algorithms

Optimization of the Welding Parameters of High-Quality Aluminum/Copper FSSW Joints Using Taguchi Method Combined with Back Propagation Neural Network and Genetic Algorithm

Effect of tungsten inert gas welding parameters on the performance of AISI 304 alloy steel using multi-response optimization technique

Development of ANN modelling for estimation of weld strength and integrated optimization for GTAW of Inconel 825 sheets used in aero engine components

Prediction of the fatigue curve of high-strength steel resistance spot welding joints by finite element analysis and machine learning

A comparative analysis of forecasting surface hardness in various aluminum friction stir welded joints: FEM-ANN hybrid versus ANN-PSO-integrated approaches

Artificial intelligence algorithms for prediction of the ultimate tensile strength of the friction stir welded magnesium alloys

Intelligent Prediction of FSW Physical Quantity and Joint Mechanical Properties

Development of mechanical property prediction model and optimization for dissimilar aluminum alloy joints with the friction stir welding (FSW) process

Achieving Optimal Weld Bead Geometry and Dilution Ratio in Tungsten Inert Gas–Metal Inert Gas Hybrid Welding through ANN-TLBO Algorithmic Optimization

Comparative Analysis of Predictive Modeling Techniques for Mechanical Properties in Dissimilar Friction Stir Welding of AA6061 and AZ31B

Assessment of friction stir spot welding of AA5052 joints via machine learning