Abstract:Airflow sensor is a crucial component for monitoring environmental airflow conditions in many engineering fields, especially in the field of aerospace engineering. However, conventional airflow sensors have been suffering from issues such as complexity and bulk in structures, high cost in fabrication and maintenance, and low stability and durability. In this work, we developed a facile direct-writing method for fabricating a low-cost piezoresistive element aiming at high-performance airflow sensing, in which a commercial pen was utilized to drop solutions of single-walled carbon nanotubes onto tissue paper to form a piezoresistive sensing element. The encapsulated piezoresistive element was tested for electromechanical properties under two loading modes: one loading mode is the so-called pressure mode in which the piezoresistive element is pressed by a normal pressure, and another mode is the so-called bending mode in which the piezoresistive element is bended as a cantilever beam. Unlike many other developed airflow sensors among which the sensing elements are normally employed as cantilever beams for facing winds, we designed a fin structure to be incorporated with the piezoresistive element for airflow sensing; the main function of the fin is to face winds instead of the piezoresistive element, and subsequently transfer and enlarge the airflow pressure to the piezoresistive element for the normal pressure loading mode. With this design, the piezoresistive element can also be protected by avoiding experiencing large strains and direct contact with external airflows so that the stability and durability of the sensor can be maintained. Moreover, we experimentally found that the performance parameters of the airflow sensor could be effectively tuned by varying the size of the fin structure. When the fin sizes of the airflow sensors were 20 mm, 30 mm, and 40 mm, the detection limits and sensitivities of the fabricated airflow sensors were measured as 8.2 m/s, 6.2 m/s, 3.2 m/s, 0.0121 (m/s)−2, 0.01657 (m/s)−2, and 0.02264 (m/s)−2, respectively. Therefore, the design of the fin structure could pave an easy way for adjusting the sensor performance without changing the sensor itself toward different application scenarios.

Ultrasensitive Airflow Sensors Based on Suspended Carbon Nanotube Networks (Adv. Mater. 18/2022)

Ultrasensitive Airflow Sensors Based on Suspended Carbon Nanotube Networks

High-Performance Airflow Sensors Based on Suspended Ultralong Carbon Nanotube Crossed Networks

Recent Advances in Flexible Pressure/strain Sensors Using Carbon Nanotubes

Expanded Carbon Nanotube Fiber at the Liquid-Air Interface for High-Performance Fiber-Based Supercapacitors and Electrochemical Sensors

A Robust Bridge‐Type Airflow Sensor Based on Flexible Superhydrophobic Carbon Nanotube Fiber Thin Films

Bioinspired Fluffy Fabric with In Situ Grown Carbon Nanotubes for Ultrasensitive Wearable Airflow Sensor

Bioinspired Ultrasensitive and Flexible Airflow Sensor based on Short Carbon Fiber Network

High Sensitivity Carbon Nanotubes Flow-Rate Sensors And Their Performance Improvement By Coating

Progress in Carbon Nanotube Gas Sensor Research

High Sensitivity Temperature Sensor Based on A Long, Suspended Single-Walled Carbon Nanotube Array

A Direct-Writing Approach for Fabrication of CNT/Paper-Based Piezoresistive Pressure Sensors for Airflow Sensing

Highly Sensitive Hot-Wire Anemometry Based On Macro-Sized Double-Walled Carbon Nanotube Strands

Highly Transparent and Transferable Ultralong Carbon Nanotube Networks for Transparent Wearable Electronics

Gas Sensing Performance and Charge-Transfer Mechanism of Semiconducting Single-Walled Carbon Nanotubes

Toward Practical Gas Sensing with Rapid Recovery Semiconducting Carbon Nanotube Film Sensors

Advances in Carbon Nanotube-Based Gas Sensors: Exploring the Path to the Future

Gas Sensors Based on Single-Wall Carbon Nanotubes

Batch Fabrication of Ultrasensitive Carbon Nanotube Hydrogen Sensors with Sub-ppm Detection Limit.

Microfabricated breath sensor based on carbon nanotubes for respiration monitoring

Research Advances in Response Mechanism of Carbon Nanotube-based Gas Sensors