Abstract:This paper presents an optimal tuning of a proportional integral differential (PID) controller used to maintain glucose concentration at a desired set point. The PID controller synthesizes an appropriate feed rate profile for an E. coli fed-batch cultivation process. Mathematical models are developed based on dynamic mass balance equations for biomass, substrate, and product concentration of the E. coli BL21(DE3)pPhyt109 fed-batch cultivation for bacterial phytase extracellular production. For model parameter identification and PID tuning, a hybrid metaheuristic technique—chaotic electromagnetic field optimization (CEFO)—is proposed. In the hybridization, a chaotic map is used for the generation of a new electromagnetic particle instead of the electromagnetic field optimization (EFO) search strategy. The CEFO combines the exploitation capability of the EFO algorithm and the exploration power of ten different chaotic maps. The comparison of the results with classical EFO shows the superior behaviour of the designed CEFO. An improvement of 30% of the objective function is achieved by applying CEFO. Based on the obtained mathematical models, 10 PID controllers are tuned. The simulation experiments show that the designed controllers are robust, resulting in a good control system performance. The closed-loop transient responses for the corresponding controllers are similar to the estimated models. The settling time of the control system based on the third PID controller for all estimated models is approximately 9 min and the overshoot is approximately 15%. The proposed CEFO algorithm can be considered an effective methodology for mathematical modelling and achievement of high quality and better performance of the designed closed-loop system for cultivation processes.

Model-Based PID Tuning Method for a Reactor for Microwave-Assisted Chemistry

Robust PID Tuning Using Closed-Loop Identification

A Recursive Tuning Approach for the Model-Free PID Controller Design

Robust Pid Controller Design Using Co-Evolutionary Particle Swarm Optimization

The SMEC-based Optimal Parameter Tuning Method for PID Controller

Closed-loop Identification Based PID Tuning Without External Excitation

Parameter Tuning and Simulation of PID Controller for Reactor Power Control System

Monte-Carlo Simulation of PID Tuning Methods

Modeling and numerical analysis of PID-controlled phase-change transpiration cooling

Predictive control optimization based PID control for temperature in an industrial surfactant reactor

PID Controller Design for an E. coli Fed-Batch Fermentation Process System Using Chaotic Electromagnetic Field Optimization

Design of the PID temperature controller for an alkaline electrolysis system with time delays

Decentralized PID Controllers Tuning Based on Desired Dynamic Equations

Research on the Desired Dynamic Selection of a Reference Model-Based PID Controller: A Case Study on a High-Pressure Heater in a 600 MW Power Plant

Study of PID Control Algorithm Based on the Critical Ratio Method

Using CMA-ES for tuning coupled PID controllers within models of combustion engines

Simple Analytical Min-Max Model Matching Approach to Robust Proportional-Integrative-Derivative Tuning with Smooth Set-Point Response

An Improved Approach to Tuning MPC-PID Controller Parameters for Non-Gaussian Systems

Study on the Relationships Between Two Typical Modeling Methods in Process Control

Robust Fine Tuning of Optimal PID Controller With Guaranteed Robustness

A Simple but Effective MacPID Tuning Method Based on the Robust Theory