Abstract:The state-of-the-art solar-thermal evaporators demonstrating high energy utilization efficiency, a high evaporation rate, and salt rejection are highly desirable in solar-driven low-energy water purification/harvesting. Herein, a novel Janus solar evaporator is constructed by loading polypyrrole (PPy) nanobelts on the polyvinyl alcohol (PVA) hydrogel. The PPy nanobelts present a high solar absorption of 98.3%, leading to a localized solar-thermal efficiency of 82.5% when insulated from bulk water by the PVA hydrogel. The porous PVA hydrogel and the hydrophilic PPy nanobelts enable the efficient three-dimensional water transport. Taking advantages of the synergistic effect in the water-energy nexus, the Janus PPy hydrogel evaporator evaporates water with a high rate of 2.26 kg m–2 h–1 via 80.1% solar energy from 1 sun irradiance with a low PPy loading of ∼3 mg cm–2 even at a rate of 2.64 kg m–2 h–1 via 96.3% solar energy for a biomimetic conical evaporator. The Janus evaporator presents superior salt-resistant desalination and contaminant purification performance in seawater and sewage. Furthermore, a portable solar-thermal purifier equipped with the Janus evaporator desalts real seawater far above the drinking water standard with over a 99.9% salt rejection rate and eliminates 95.8% of chemical oxygen demand in real sewage, highlighting its potential for advanced clean water harvesting.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13584.Instruments and characterization; desalination and purification tests; instruments; calculations of total solar absorption of PPy nanobelts; calculations of vaporization enthalpy and energy efficiency; digital images of the bulk FeOCl crystal and superfine FeOCl powder; digital images of PPy dispersions in DMSO; XRD pattern of PPy nanobelts; FTIR spectra of PPy nanobelts, PVA and the PPy-PVA compound; temperature curve of the PPy nanobelts under 1 sun irradiation over time; calculations of solar-thermal conversion efficiency; mechanical strength of the PVA hydrogel; π–π interactions of PPy nanobelts; water contact angle of the PPy nanobelt film; UV–vis–NIR reflectance spectra of the upper surface of both flat and conical evaporators; evaporation rate of the conical Janus-type PPy hydrogel evaporator under 1, 2, and 5 sun irradiation; mass loss of simulated average seawater for the conical Janus evaporator with a PPy nanobelt loading content of 3 mg cm–2 compared with the bare pure water as the blank control experiment under 1 sun; corresponding fitted calibration curve of UV–vis absorbance versus gentian violet concentration at 588 nm; water transport rate of the PVA hydrogel; and calculations of COD (PDF)Washing test (MP4)This article has not yet been cited by other publications.

Light‐Based Desalination of Water Using Polypyrrole‐Coated Fabrics

Facile Polypyrrole Thin Film Coating on Polypropylene Membrane for Efficient Solar-Driven Interfacial Water Evaporation

coating on polypropylene membrane for e ffi cient solar-driven interfacial water evaporation †

Salt Resistant PPy/MXene Flexible Waffle Type Fabric for Efficient Solar Evaporation and Water Purification Production

MXene-based flexible and washable photothermal fabrics for efficiently continuous solar-driven evaporation and desalination of seawater

In-Situ polymerized polypyrrole Janus cotton fabric for Solar-driven water evaporation in Textile-dying wastewater

Highly Efficient Solar-Driven Interface Water Evaporation Achieved on Polypyrrole@Single-Sided Flannel

Bifunctional Fabric with Photothermal Effect and Photocatalysis for Highly Efficient Clean Water Generation

Highly efficient water steam generation via natural black urushiol-Fe polymeric microspheres coated-cotton fabric

In situ polymerization of three-dimensional polypyrrole aerogel for efficient solar-driven interfacial evaporation and desalination

Janus Polypyrrole Nanobelt@Polyvinyl Alcohol Hydrogel Evaporator for Robust Solar-Thermal Seawater Desalination and Sewage Purification

Polyethersulfone-silica aerogel/ polypyrrole solar evaporation membrane for wastewater treatment and desalination

Flexible hierarchical polypyrrole-coated Cu-BTC MOFs photothermal textile for efficiently solar water evaporation and wastewater purification

Salt-tolerant, Scalable Janus Fabric Evaporators for Desalination and Multi-species Wastewater Purification

Photo‐Electro‐Thermal Textiles for Scalable, High‐Performance, and Salt‐Resistant Solar‐Driven Desalination

Covalently doping polyaniline-based photothermal fabric for continuous recovery of salt and freshwater from seawater via solar-driven interfacial evaporation

Bioinspired Asymmetric Polypyrrole Membranes with Enhanced Photothermal Conversion for Highly Efficient Solar Evaporation

Salt-Resistant Photothermal Materials Based on Monolithic Porous Ionic Polymers for Efficient Solar Steam Generation

Portable solar interfacial evaporator based on polyimide nanofiber aerogel for efficient desalination

Highly salt-resistant 3D melamine sponge-polypyrrole composites for efficient solar interfacial evaporation