Abstract:On account of certain technological requirements, it is difficult for some industrial processes that generate dust to be sealed in a fixed pattern and ventilated for dust discharge, mainly automatic welding, pressure casting, wood processing, and crop production, which has become a significant bottleneck in dust control. The present study developed a transverse-flow soft-sealing dust control system, in which four novel air curtain generators were arranged in a square pattern within the region where dust was generated to create end-to-end planar transverse-flow air curtains and achieve soft sealing. The air suction inlet was placed centrally above the area where dust was generated; under the suction airflow, the dusty air was gradually diluted and driven away to effectively suppress dust escape. The flow field characteristics in the area where dust was generated and the performance of the developed sealing system in controlling fine smoke dust were qualitatively analyzed using a tracing experiment with smoke dust. Tracing experimental results on leaf powder qualitatively reveal directional dust control of large dust particles. Moreover, the dust control efficiency was evaluated under different conditions to quantitatively investigate the effects of air curtain outlet velocity, exhaust-to-pressure ratio, and jet angle. The results show that with a greater air supply and air suction rate, the airflow exhibited a more obvious entrainment effect and stronger dust exhaust and discharge, and simultaneously, the formed tracing smoke column had a clearer boundary. At an air curtain outlet velocity of 6.27–8.39 m/s and a corresponding air supply rate of 17.00–22.57 m3/min, a stable air curtain was formed, which achieved remarkable dust control at an exhaust-to-pressure ratio of 0.8–1.0. With an increase in the air curtain jet angle, the dust control efficiency of the system first increased but subsequently decreased. In the present study, the appropriate air curtain jet angle was 10–20° for the developed soft-sealing system. In conclusion, when the air curtain outlet velocity, exhaust-to-pressure ratio, and jet angle were 6.27 m/s, 0.6, and 15°, respectively, the dust control efficiency of the developed soft-sealing system reached 92.6%.

Experimental study of the formation and diffusion of soap bubbles for wrapping and transporting indoor airborne pollution

Analysis of parameters for spray-local exhaust ventilation (SLEV) to minimize high-temperature smoke pollutants and reduce energy consumption

Flow-field characteristics and ventilation performance of the high-temperature buoyant jet controlled by spray-local exhaust ventilation

Air Purification Study Based on the Adhesion Effect between Low-Curvature Liquid Surfaces and Air Convection Friction

A circulating ventilation system to concentrate pollutants and reduce exhaust volumes: Case studies with experiments and numerical simulation for the rubber refining process

Bubble Manipulates the Release of Viral Aerosols in Aeration.

CFD Studies on the Spread of Ammonia and Hydrogen Sulfide Pollutants in a Public Toilet under Personalized Ventilation

Experimental and theoretical investigation on transportation of gaseous pollutants in long and narrow industrial buildings

Optimizing indoor air quality: CFD simulation and novel air cleaning methods for effective aerosol particle inhibition in public spaces

Research On Bake-Out Technology With Dilution Ventilation For Indoor Air Pollution

Experiment and numerical investigation of inhalable particles and indoor environment with ventilation system

Numerical comparison of exhaled particle dispersion under different air distributions for winter heating

Spatial distribution of bioaerosols and evaluation of four ventilation method on controlling their diffusion in a typical enhanced biosafety level 2 laboratory

CFD Analysis of the Performance of a Local Exhaust Ventilation System in a Hospital Ward

Removal of Contaminants Released from Room Surfaces by Displacement and Mixing Ventilation: Modeling and Validation.

Investigation of the dust control performance of a new transverse-flow air curtain soft-sealing system

Performance of three air distribution systems in VOC removal from an area source

Bionic Packings Enhance the Absorption of SO 2 in a Bubble Column

Development and Optimization of A Low-Pressure Microbubble Scrubber for Air Pollutants Removal Using CFD

Hydrodynamics and mass transfer performance of microbubble flow in the bubble column with a contraction section