Abstract:As a passive damping technique for vibration and noise mitigation, acoustic black hole (ABH) structures have been drawing an increasing attention because of their easy-to-realize and broadband wave focusing and energy dissipation characteristics. Structures with embedded ABHs, however, inevitably compromise the overall structural stiffness and strength, which hampers their use as critical structural components. As an alternative, this paper proposes a new type of device, i.e. a two-dimensional circular ABH-based dynamic vibration absorber (2D ABH-DVA), as an auxiliary component to be added to an existing structure for vibration suppressions. Using a plate as benchmark structure, finite element (FE) simulation results show a systematic reduction of its resonant peaks over a broad frequency range upon the deployment of the ABH-DVA. Analyses uncover two underlying mechanisms which dominate the physical process: dynamic interaction with the host structure and damping enhancement as a result of ABH-specific energy trapping. This is warranted by an effective dynamic coupling between the primary structure and the add-on ABH-DVA, which can be quantified by a mode-specific and location-dependent coupling coefficient defined in the paper. It is further demonstrated that, despite the rich modal contents of the ABH-DVA, strong coupling with the primary structure only takes place through a few DVA modes. Analyses also lead to a simple linear relationship relating the overall system damping with the properties of the damping material over the ABH-DVA. Finally, the broadband vibration suppression ability of the proposed 2D ABH-DVA is verified through experiments. The study demonstrates the unique coupling features between the DVA and the host structure, which provides design guidelines for unsymmetrical 2D or other ABH-DVA designs in the future.

Enhanced Energy Transfer and Multimodal Vibration Mitigation in an Electromechanical Acoustic Black Hole Beam

Energy transfer for enhanced acoustic black hole effect through a cable-induced mechanical nonlinearity

Vibration Isolation by a Periodic Beam with Embedded Acoustic Black Holes Based on a Hybrid Dynamics Method

Tunable Shunting Periodic Acoustic Black Holes for Low-Frequency and Broadband Vibration Suppression

Low-Frequency Multimode Vibration Suppression of an Acoustic Black Hole Beam by Shunt Damping

A novel periodic beam with multilayer acoustic black holes for deep sub-wavelength vibration attenuation

A Multibody Dynamics Approach on a Tree-Shaped Acoustic Black Hole Vibration Absorber

Research on Vibration Absorption and Isolation Characteristics of Periodic Acoustic Black Hole Beam Resonators and Their Enhancement

A Combined Periodic Acoustic Black Hole Beams with Wide Vibration Attenuation Bands

A Vibro-Impact Acoustic Black Hole for Passive Damping of Flexural Beam Vibrations

Vibration Suppression of Acoustic Black Hole Beam by Piezoelectric Shunt Damping with Different Positions

Vibration Damping by Periodic Additive Acoustic Black Holes

The Exact Spectral Element Modeling and Vibration Analysis of the Acoustic Black Hole Double-Beam System

Theoretical modeling and vibration characteristics analysis of acoustic black hole beam

Multimodal Local Resonators for Low-Frequency Amelioration of Acoustic Black Holes

Broadband Vibroacoustic Reduction for a Circular Beam Coupled with a Curved Acoustic Black Hole Via Nullspace Method

Damping Evolution Mechanism of Panel Embedded with Heterogeneous Acoustic Black Hole Array

Exploration of Energy Distribution in Acoustic Black Hole Beams

A Vibration Absorber Based on Two-Dimensional Acoustic Black Holes

Embedded periodically ABHs and distributed DVAs for passive low-frequency broadband vibration attenuation in thin-walled structures

Ultra-low frequency broadband gap optimization of 1D periodic structure with dual power-law acoustic black holes