Abstract:Background: For the treatment of bone defects that exceed the critical size of the injury, several therapies have been investigated. Thermal decomposition method is suggested for extraction of natural hydroxyapatite bioceramic (HA). This technique in comparison with other methods of producing HA, has less complexity and greater economic efficiency. Objective: In the present study, a thermal decomposition method is suggested for extraction of natural HA from bovine femur bones. Methods: In this experiment, to extract the ceramic material, the bone samples were first de-fatted and ground to particles less than 420 μm, and also 420-500 μm, respectively. Prepared powders were heated at 170 °C for 24 h, and then divided into two groups for 6 h. The first group was heated at 750 °C; the second group was heated at 850 °C. The calcium phosphate compounds were obtained with complete elimination of the organic phase of the bone. These bioceramic compounds were characterized physiochemically by X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray (EDX), and scanning electron microscopy (SEM). Results: We found that the powder heated at 750 °C in two dimensional scales was rich in carbonated hydroxyapatite, and therefore, eminently suitable for using in hard tissue replacements. However, increasing the temperature up to 850 °C reduced the Ca/P ratio to 1.5 in the powder sample sizes less than 420 μm. Consequently, the obtained composition became rather similar to the chemical formula of tricalcium phosphate (TCP) that is appropriate in tissue engineering and drug delivery applications. Conclusion: The observations affirmed that by eliminating the collagen and other organic materials existing in the bovine bones, the mineral phase of the bone had the potential of transformation to nano-particles. To investigate the repair of critical-size bone defects and bone augmentation, cylindrical blocks were fabricated by applying different pressures of 150, 160 and 170 MPa. The structure and compressive strength of the pressed samples after sintering at 1200 °C were characterized by SEM and compressive strength test.

Fabrication of mechanically enhanced hydroxyapatite scaffold with the assistance of numerical analysis

A Method to Construct a High Mechanical Property’s Silk Fibroin/Hydroxyapatite Scaffold

Taguchi grey relational analysis on the mechanical properties of natural hydroxyapatite: effect of sintering parameters

Structural and Mechanical Characterization of 3D Printed Hydroxyapatite Scaffolds Designed for Biomedical Applications

Phase Transformation and Mechanical Optimization of Eggshell-Derived Hydroxyapatite across a Wide Sintering Temperature Range

Enhancing scaffold strength through rheological profiling of hydroxyapatite/nano-silica composite ink for advanced additive manufacturing ofbone-mimicking ceramic scaffolds

Fabrication of a hard tissue replacement using natural hydroxyapatite derived from bovine bones by thermal decomposition method

Enhancing Bone Implants: Magnesium-Doped Hydroxyapatite for Stronger, Bioactive, and Biocompatible Applications

Study of the suitability of a commercial hydroxyapatite powder to obtain sintered compacts for medical applications

Exploring the effect of sintering temperature on naturally derived hydroxyapatite for bio-medical applications

Morphology, Deformation, and Micromechanical Behavior of Electrospun Nano‐hydroxyapatite Blended Biohybrid Scaffolds

Biomimetic hydroxyapatite and strontium-doped derivatives from crab shells and their ingenious scaffold fabrication for bone tissue engineering

Mathematical Model for the Prediction of Impact Energy of Organic Material Based Hydroxyapatite (HAp) Reinforced Epoxy Composites

Hydrothermal synthesis of hydroxyapatite powders using Response Surface Methodology (RSM)

Hydroxyapatite nano bioceramics optimized 3D printed poly lactic acid scaffold for bone tissue engineering application

Hydroxyapatite synthesis and characterization from waste animal bones and natural sources for biomedical applications

In-depth review of synthesis of hydroxyapatite biomaterials from natural resources and chemical regents for biomedical applications

Investigation of Physico-mechanical Behavior, Permeability and Wall Shear Stress of Porous HA/PMMA Composite Bone Scaffold

Fabrication, chemical composition change and phase evolution of biomorphic hydroxyapatite

Eggshell derived scaffold of hydroxyapatite-ammonium bicarbonate nano-composite: Bioactivity and cytotoxicity studies

Thermal Behavior, Sintering and Mechanical Characterization of Multiple Ion-Substituted Hydroxyapatite Bioceramics