Abstract:During the re-entry process of a supersonic vehicle in near space, the interaction between the flying vehicle and surrounding air is violent due to the hypersonic relative speed. As a consequence, the shock-heated air in the vicinity of the vehicle surface is ionized. Thus, the formed plasma layer operates in strong collision, non-uniform and non-equilibrium states. One of the serious system operation problems resulting from this non-equilibrium plasma layer is the so-called communication blackout. Physical simulation of the near-space plasma environment in laboratory based on various plasma sources is a much lower cost method than the in-situ measurements in the vehicle re-entry process. In this paper, based on the ideas for designing the dual jet direct current arc plasma and the muti-phase alternating current discharge plasma, a physical design on the multi-phase alternating discharge apparatus is proposed for generating a large volume plasma arc-jet. And a multi-phase gas discharge plasma experimental platform-2015 (MPX-2015) is established with the image recording/processing, electrical and optical emission spectroscopy measurement system in this laboratory. The preliminary experimental observations show that under a typical operating condition with a 500 Pa background pressure, a large volume plasma jet with a maximum diameter of 14.0 cm and a maximum length of 60.0 cm is obtained on this newly developed platform. The influences of the gas flow rate, the chamber pressure, the electrode gap spacing and the arc current on the characteristics of the plasma free jet and impinging jet are also studied. The experimental results show that within the parameter ranges studied in this paper, the chamber pressure has a very significant influence on the size of the plasma jet, i.e., both the diameter and length of the plasma free jet increase with chamber pressure decreasing, and a similar variation trend is also observed for the thickness and length of the plasma layer surrounding a bluff body. In addition, the size of the plasma layer also increases with the increase of the plasma working gas flowrate and the discharge current. These results are helpful in the more in-depth investigating of the aerodynamic heat effect and blackout issue of the re-entry process of supersonic vehicle in near space in future. In the future research, we will modify the structures of the plasma generators in order to obtain supersonic plasma arc-jets, and study both the quasi-steady and transient characteristics of the arc plasmas, as well as the strong interactions among the plasma jet, the surrounding air and the solid bluff body.

Low vacuum enhanced expansion of a supersonic arc plasma plume

Effect of spraying ceramic powder pore structure on thermophysical properties of plasma-sprayed thermal barrier coatings

Formation and Behavior of Thermal Barrier Coatings on Nickel-Base Superalloys

Thermal Fatigue of Atmospheric Plasma Sprayed Thermal Barrier Coatings

High Temperature Thermal Properties of Columnar Yttria Stabilized Zirconia Thermal Barrier Coating Performed by Suspension Plasma Spraying

Physical and mechanical properties of plasma-sprayed thermal barrier coatings at room and high temperatures

Ablation Experiments of Ultra-High-Temperature Ceramic Coating on Carbon–Carbon Composite Using ICP Plasma Wind Tunnel

Experimental Investigation on High Heat Flux Plasma Parameters of HIT-PSI Device in Argon Discharges

Excitation Temperature and Constituent Concentration Profiles of the Plasma Jet Under Plasma Spray-PVD Conditions

Thermal Stability of Plasma-Sprayed Thick Thermal Barrier Coatings Using Triplex ProTM-200 Torch

Fabrication and characterization of thermal barrier coatings for internal combustion engines via suspension plasma spray with high solid loading

Novel Thermal Barrier Coatings with Phase Composite Structures for Extreme Environment Applications: Concept, Process, Evaluation and Performance

A high temperature engine materials test facility

Novel Low Thermal Conductivity Ceramic Materials for Thermal Barrier Coatings

Progress in ceramic materials and structure design toward advanced thermal barrier coatings

Laser Thermal Gradient Testing and Fracture Mechanics Study of a Thermal Barrier Coating

Preparation of Thermal Barrier Coatings by Ultrasonic Plasma Spraying

Rear Earth Oxide Multilayer Deposited by Plasma Spray-Physical Vapor Deposition for Envisaged Application as Thermal/Environmental Barrier Coating

Characteristics of meso-pressure six-phase alternative current arc discharge plasma jet: Experiments

Study on the mechanism of ultra-high temperature ablation of ZrB2–SiC–TaSi2 coatings by low-pressure plasma spraying on the C/C composites

Very low-pressure plasma-sprayed dense yttria-stabilized zirconia coatings using an axial bi-cathode plasma torch