Abstract:Metal oxide semiconductors (MOS) with different nanostructures have been widely used as gas sensing materials due to the tunable interface structures and properties. However, further improvement of the sensing sensitivity and selectivity is still challenging in this area. Constructing appropriate heterogeneous interface structures and oxygen vacancies is one of the important strategies to tune the sensing properties of MOS. In the present study, interfacial heterostructures in PdxW18O49 nanowires (PdxW18O49 NWs) were fabricated and manipulated by doping different Pd contents through a simple hydrothermal process. Relevant characterization proved that the structure and composition of the one-dimensional (1D) nanomaterial can be effectively changed by Pd doping. It was found that the oxygen vacancy concentration increases first with the increase of Pd content, and when the Pd content increases to 7.18% (Pd7.18%W18O49 NWs), the oxygen vacancy content reaches the maximum (52.5%). If the Pd content continues to increase, the oxygen vacancy ratio decreases. The gas sensing investigations illustrated that the PdxW18O49 NWs exhibited enhanced sensing properties than pure W18O49 NWs toward acetone. Among the as-prepared catalysts, the Pd7.18%W18O49 NWs showed the best sensing response and the fastest response-recovery speeds (5 and 10 s, respectively) at a working temperature of 175 °C. In addition, this 1D nanostructure with fabricated heterostructures also delivers a good sensing selectivity and a wide detection range from 100 ppb to 300 ppm, with maintaining excellent performance in the presence of high concentrations of ethanol and carbon dioxide. The excellent gas sensing behavior could be attributed to the generated oxygen vacancies and the heterostructures upon Pd doping. This study offers a novel strategy for the design of high-performance gas sensors for ppb-level acetone sensing.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.analchem.1c00568?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.analchem.1c00568</a>.Gas-sensing experimental setup, more gas sensing data, and comparison of acetone-sensing performance of the present Pdx W18O49 NWs with the previously reported sensing materials (<a class="ext-link" href="/doi/suppl/10.1021/acs.analchem.1c00568/suppl_file/ac1c00568_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhanced acetone gas-sensing characteristics of Pd–NiO nanorods/SnO 2 nanowires sensors

Enhanced Ethanol-Sensing Characteristics of Au Decorated In-doped SnO2 Porous Nanotubes at Low Working Temperature

Enhanced Acetone Sensing Properties Based on Au-Pd Decorated ZnO Nanorod Gas Sensor

High-performance acetone sensor based on electrospun Tb-doped a-Fe<sub>2</sub>O<sub>3</sub> nanotubes

Enhanced Acetone-Sensing Properties to Ppb Detection Level Using Au/Pd-doped ZnO Nanorod

Enhanced Acetone Gas Sensor via TiO 2 Nanofiber-NiO Nanoparticle Heterojunction

Boosting the acetone gas sensing of WS 2 –ZnO nanosheets by codecoration of Pt/Pd nanoparticles

Pd-Doping-Induced Oxygen Vacancies in One-Dimensional Tungsten Oxide Nanowires for Enhanced Acetone Gas Sensing

Mesoporous NiFe 2 O 4 nanorods functionalized Pt catalysts dictates highly sensing performance to acetone detection

Pt-decorated NiWO4/WO3 heterostructure nanotubes for highly selective sensing of acetone

Enhancement of the Acetone Sensing Capabilities to Ppb Detection Level by Fe-doped Three-Dimensional SnO 2 Hierarchical Microstructures Fabricated Via a Hydrothermal Method

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Au-catalyzed Fe2O3@SnO2 heterostructured nanowires for improved low-concentration acetone sensing

Synthesis and Gas Sensing Properties of NiO/SnO2 Hierarchical Structures Toward Ppb-Level Acetone Detection

MOF-based nanoscale Pt catalyst decorated SnO2 porous nanofibers for acetone gas detection

Nanoscale PtO2 Catalysts-Loaded SnO2 Multichannel Nanofibers toward Highly Sensitive Acetone Sensor

Metal-Organic Framework Templated Catalysts: Dual Sensitization of PdO-ZnO Composite on Hollow SnO2 Nanotubes for Selective Acetone Sensors

ZnO Branched P-Cuxo @N-Zno Heterojunction Nanowires for Improving Acetone Gas Sensing Performance

Ultrafast Response and High-Sensitivity Acetone Gas Sensor Based on Porous Hollow Ru-doped SnO2 Nanotubes

Synergistic effects of α-Fe2O3nanoparticles and Fe-doping on gas-sensing performance of NiO nanowires and interface mechanism