Multi-Physical Field Analysis and Optimization Design of the High-Speed Motor of an Air Compressor for Hydrogen Oxygen Fuel Cells

Xiaojun Ren,Ming Feng,Jinliang Liu,Rui Du

DOI: https://doi.org/10.3390/en17112722

IF: 3.2

2024-06-04

Energies

Abstract:The hydrogen oxygen fuel cell is a power source with significant potential for development. The air compressor provides ample oxygen for the fuel cell, and as a key component of the air compressor, the performance of the motor greatly impacts the efficiency of the fuel cell. In order to enhance the system performance of high-speed permanent magnet motors, optimization was conducted on the motor's geometric dimensions to minimize rotor loss and maximize power density, taking into account the comprehensive constraints of electromagnetic and mechanical properties. The finite-element method was employed to analyze the motor's performance, conducting a multi-physical field analysis that included electromagnetic field, rotor loss, and mechanical strength analysis, as well as temperature field analysis. Aiming at the problem of high temperature rise in high-speed motor winding, the influence of the cooling water flow rate on the winding temperature rise was analyzed and simulated. Based on the analysis results, the minimum cooling water flow rate was obtained. According to the optimized design results, a prototype of an 18 kW, 100,000 rpm motor was manufactured, and the efficiency and temperature rise were tested. The experimental results verify the correctness and effectiveness of the optimal design.

energy & fuels

What problem does this paper attempt to address?

The problem this paper attempts to address is improving the performance of high-speed permanent magnet motors for air compressors used in hydrogen-oxygen fuel cells. Specifically, the paper aims to reduce rotor losses and increase power density by optimizing the motor's geometric dimensions, while considering the combined constraints of electromagnetic and mechanical performance. Additionally, the paper analyzes the issue of excessive temperature rise in the windings of high-speed motors and studies the impact of cooling water flow on the winding temperature rise to determine the minimum cooling water flow. Ultimately, an 18 kW, 100,000 rpm motor prototype was manufactured based on the optimized design results, and efficiency and temperature rise tests were conducted to verify the correctness and effectiveness of the optimized design.

Summary:
- **Main Problem**: Improving the performance of high-speed permanent magnet motors for air compressors used in hydrogen-oxygen fuel cells.
- **Specific Goals**: Reducing rotor losses, increasing power density, and controlling temperature rise.
- **Methods**: Multi-physics analysis (including electromagnetic field, rotor losses, mechanical strength, and temperature field analysis) and optimization design.
- **Results**: An 18 kW, 100,000 rpm motor prototype was manufactured, and experimental results verified the effectiveness of the optimized design.