Abstract:This paper introduces a novel five-port, three-input, dual-output isolated bidirectional dc-dc converter (FPIBC) topology with an effective controller for power-sharing and voltage-balancing in bipolar dc microgrids (BPDCMGs). The proposed converter acts as the interface for the integration of a hybrid generation system comprising a solid oxide fuel cell (SOFC), a photovoltaic (PV) system, and a battery into BPDCMGs. It employs a reduced number of circuit elements compared with similar multiport converter topologies suggested for BPDCMG applications. Symmetrical bipolar output voltages are ensured by a voltage-balancing circuit composed of a fully controlled switch and four diodes. The FPIBC is equipped with different controllers for output voltage regulation and balancing, power sharing, maximum power point tracking of the PV, the optimum operating region of the SOFC, and constant-current, constant-voltage charging of the battery. To verify the viability and effectiveness of the proposed system, a simulation model was developed with a 4.2 kW SOFC, a 3.7 kW PV, and a 140 V 10.8 Ah battery in MATLAB/Simulink. The performance of the FPIBC was evaluated through extensive case studies with different operational modes, including battery charge/discharge states and SOFC and PV parameter changes under varying load conditions. In addition, the proposed system was examined using a daily dynamic load profile. According to the simulation results, a peak efficiency of 97.28% is achieved and the voltage imbalance between the output ports is maintained below 0.5%. It is shown that the FPIBC has advantages over previous converters in terms of the number of ports, number of circuit elements, bipolar output voltage, bidirectional power flow, and efficiency.

Various MPPT Modes and Dynamic Performance of Coupled Inductor Bipolar Multi-Output Converter with No Right Half Plane Zero

An Analog Mppt Controller Ic Together With Its Application Circuit

Wide-Range, High-Precision and Low-Complexity Mppt Circuit Based on Perturb and Observe Algorithm

The MPPT Application of the FSBB Converter with MHz ZVS Digital Control

Common-Ground-Type Single-Source High Step-Up Cascaded Multilevel Inverter for Transformerless PV Applications

A Center Point Iteration MPPT Method with Application on the Frequency-Modulated LLC Microinverter

Dynamic Maximum Power Injection Control of Ac Photovoltaic Modules Using Current-Mode Control

A Multilevel Inverter with Minimized Components Featuring Self-balancing and Boosting Capabilities for PV Applications

Synchronous Dual-Switch Ultrahigh Step-up DC-DC Converter Based on Coupled Inductor and Voltage Multiplier for Photovoltaic Systems

Experimental design and analysis of advanced three phase converter for PV application with WCO-P&O MPPT controller

Five-Port Isolated Bidirectional DC-DC Converter for Interfacing a Hybrid Photovoltaic–Fuel Cell–Battery System with Bipolar DC Microgrids

A Coupled Inductors Based High Gain Non-Isolated Three-Port Dc-Dc Converter

Performance Analysis of Coupled Inductor Based Multiple-Input DC/DC Converter with PWM Plus Phase-Shift (PPS) Control Strategy

A Bipolar DC Grid-Interfaced Integrated Dual Input Converter With Reduced Overloading Under Unbalanced Line Voltage Conditions

Optimization Design and Control of Single-Stage Single-Phase PV Inverters for MPPT Improvement

Improved Maximum Power Point Tracking Algorithm for Step-Up/Down Partial Power Converters Operating Around Zero Partiality

High-gain DC-DC converter with triple-winding coupled inductor for enhanced power quality in renewable energy applications

PV Isolated Three-Port Converter and Energy-Balancing Control Method for PV-Battery Power Supply Applications.

A novel on high voltage gain boost converter with cuckoo search optimization based MPPTController for solar PV system

A Monolithic High-Performance Buck Converter with Enhanced Current-Mode Control and Advanced Protection Circuits

A novel semi-quadratic buck-boost structures with continuous input current for PV application