Abstract:The purpose of this study is to sample a procedure for numerical simulation and calculation of the processes of mixing in pipes of a T-junction (tee) of natural gas with the so-called "stripped" components, such as methane, hydrogen, and nitrogen, to obtain a mixture that can be used as a fuel at thermal power plants. The specific of fuel gas mixing is high Reynolds numbers of the simulated flows, which can be as high as Re = (5–10) × 10 6 . An analysis is presented of some experimental and modern computational studies of the processes of flow mixing in pipes and T-junctions. It is pointed out that the application of various well-accepted models for eddy viscosity or Reynolds stresses in the numerical simulation on the basis of Reynolds-averaged conservation equations yields a satisfactory agreement with experimental data on mixing flows in a T-mixer only with an unjustified decrease of the turbulent Schmidt (Prandtl) number to the value 0.1 or an increase of the known constant of turbulence models C μ by a factor of 9. It can be concluded that eddy-resolving methods are unsuitable for the investigation of mixing processes in fuel pipeline joints due to high Reynolds numbers and a great length of the main pipe. An analysis of the predictions has revealed large fluctuations in the local ratio of the generation rate of the turbulent kinetic energy to the rate of its dissipation and a sharp decrease in its value averaged over the pipe cross section at a distance of several diameters from the starting point of mixing, which is not characteristic of pipe flows, mixing layers, or jets. An attempt was made to improve the predictive capabilities of the standard k –ε model for developed turbulence, while keeping the turbulent Schmidt number and the constant С μ within the substantiated limits. An empirical formula for and a modification of the standard k –ε model, which takes into account the variability of С μ according to the Rodi dependence carefully verified against data on various free flows, are proposed. Experimental investigations of isothermal mixing of air flows in a tee mixer, one of which contained tracers in the form of glycerin-based liquid microdroplets, were carried out. The profiles of hydrodynamic characteristics of the flow downstream of the tee were measured by the planar optical SIV method at a distance of 5.5 D from the axis of the pipes' intersection. To verify the modified k –ε model, numerical simulation was performed of the mixing of gases and liquids in a tee mixer, and the predictions were compared with the experiment. The results are presented of the calculation of natural gas mixing in a tee mixer with a methane-hydrogen fraction from petrochemical facilities.

Simulation of flow conditions for natural gas and hydrogen blends in the distribution natural gas network

Investigation on Mixing Characteristics of Hydrogen and Natural Gas Fuel Based on SMX Static Mixer

Numerical Investigation on Leakage and Diffusion Characteristics of Buried Hydrogen-Blended Natural Gas Pipelines

Computational fluid dynamic analysis of hydrogen‐injected natural gas for mixing and transportation behaviors in pipeline structures

Comprehensive assessment of hydrogen injection in natural gas networks: Using dimensional analysis and reduced-order models for mixture quality prediction

Simulation of Mixing of Single-Phase Fluids in T-Junctions

Ultrasonic gas flow metering in hydrogen-mixed natural gas using Lamb waves

Simulation of Gas Mixture Dynamics in a Pipeline Network using Explicit Staggered-Grid Discretization

Modelling of gas network transient flows with multiple hydrogen injections and gas composition tracking

Dynamic modeling and characteristic analysis of natural gas network with hydrogen injections

Feasibility analysis of blending hydrogen into natural gas networks

CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer

Development and Validation of an On-line Hydrogen-Natural Gas Mixing System for Internal Combustion Engine Testing

Using in-line static mixers to intensify gas–liquid mass transfer processes

The Numerical Simulation of a New Double Swirl Static Mixer for Gas Reactants Mixing

Analysis of Hydrogen Gas Injection at Various Compositions in an Existing Natural Gas Pipeline

Influences of Hydrogen Blending on the Joule–Thomson Coefficient of Natural Gas

Decompression modelling of natural gas-hydrogen mixtures using the Peng-Robinson equation of state

Techno assessment on hydrogen injected gas transportation based on integrated system simulation

Analysis of numerical modeling of steady-state modes of methane–hydrogen mixture transportation through a compressor station to reduce CO2 emissions

Dynamic simulation of GEH-IES with distributed parameter characteristics for hydrogen-blending transportation