Abstract:Energy consumption of solar greenhouse depends on the thermal insulation performance and thermal storage capacity of thermal storage wall. To find the best composition scheme for heat storage wall of greenhouse in severe cold region (1A: Hailar, 1B: Anda, 1C: Shenyang), the paper uses a typical Northeast Chinese solar greenhouse as an illustration and forms 14 schemes by setting expanded polystyrene (EPS) insulation boards and phase change materials (PCMs) at different positions of the thermal storage wall, of which PCM materials have six phase change temperatures. Energy consumption, wall heat storage performance, and room temperature of these schemes are analyzed by using EnergyPlus. Energy consumption, heat storage capacity, room temperature regulation, payback period, and carbon emissions were used to compare the heat storage wall schemes. The results show that Case VI (16°C) in Hailar is the optimal scheme, its energy consumption is 46,862.886 kWh, and the added value of the payback period is 1.87 years, the second is Case a and Case e (26°C) is the worst. Case VI (16°C) in Anda is the optimal scheme, its energy consumption is 65,599.749 kWh, and the added value of the payback period is 1.59 years, the second is Case a, and Case e (26°C) is the worst. Case VII (16°C) in Shenyang is the optimal scheme, its energy consumption is 26,109780kWh, and the added value of the payback period is 1.77 years, the second is Case a, and Case f (24°C) is the worst. The reason for the difference in optimal schemes is that the outdoor temperature of Hailar and Anda is low in winter, and PCM can hardly change phase in winter, but only plays the role of heat preservation. The temperature in Shenyang is relatively high in winter, and PCM is more likely to change phase, so the closer PCM is to the room, the lower the energy consumption of the greenhouse. The research results of this paper can provide a theoretical basis for the energy-saving design of solar greenhouse.

High-efficiency energy-saving buildings utilizing potassium tungsten bronze heat-insulating glass and polyethylene glycol/expanded energy storage blanket

New energy-saving building developed by using polyethylene glycol/halloysite nanotube energy-storage blanket and heat-insulating glass with Na x WO 3 @SiO 2 nano-coating

Energy Efficiency For Airtightness And Exterior Wall Insulation Of Passive Houses In Hot Summer And Cold Winter Zone Of China

Energy-efficiency Strategies of Residential Envelope in China’s Hot Summer–Cold Winter Zone Based on Intermittent Thermal Regulation Behaviour

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Energy saving effect of external thermal insulation of residential building under actual energy usage condition in hot summer and cold winter zone

Thermal insulation performance of buildings with phase-change energy-storage wall structures

Thermal performance evaluation of glass window combining silica aerogels and phase change materials for cold climate of China

Shape-Stabilized PEGylated Silica Aerogel-Composite as an Energy Saving Building Material

Low energy consumption thermochromic smart windows with flexibly regulated photothermal gain and radiation cooling

Energy-saving potential of intermittent heating system: Influence of composite phase change wall and optimization strategy

The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index

Passive energy-saving design strategy and realization on high window-wall ratio buildings in subtropical regions

Energy-saving optimization of solar greenhouse walls in severe cold region

Potential building energy savings by passive strategies combining daytime radiative coolers and thermochromic smart windows

Study on the Influence of the Application of Phase Change Material on Residential Energy Consumption in Cold Regions of China

Using phase change materials to alleviate overheating phenomenon of residential buildings in severe cold and cold regions of China

Development of a sodium acetate trihydrate-based phase change material for efficient solar/electric-to-thermal energy conversion

Annual Energy‐Saving Smart Windows with Actively Controllable Passive Radiative Cooling and Multimode Heating Regulation

Investigations of double layer phase change walls with expanded graphite on the temperature and energy consumption

Energy Saving Potential of Variable Thermophysical Envelope Energy Storage Technologies in Different Climatic Regions