Abstract:A new configuration of aluminum electrodes has been performed in an electrocoagulation reactor (ECR) to remove toxic metals from synthetic wastewater. The ECR contains four concentric-cubic electrodes that were connected to the DC power supply with a bipolar mode. The ability of this reactor to eliminate 200 ppm Pb, 200 ppm Cd and 200 ppm Cu from wastewater was investigated under the effect of pH (4-10), applied current (0.2-2.6 A), and the reaction time of (4-60 min). Two grams of NaCl were added to each experiment to enhance the electrical conductivity and minimize the passivation of cathode surfaces. The experiments, analysis, and optimization were conducted using response surface methodology type Box-Behnken design (RSM-BBD) and the Minitab-statistical software program. The highest elimination of heavy metals was: Pb-99.73%, Cd-98.54%, and Cu-98.92% at pH 10, 1.4 A of the applied current, and 60 min of the reaction time. The total real consumption of anodes under these conditions was 0.55 g, and the energy consumption was 12.71 kWh/m3. All reactions of metal removal that occurred in the present EC reactor obey the kinetic of a first-order reaction. Thermodynamics parameters of present electrocoagulation removal of heavy metals indicate an endothermic, spontaneous nature, and random irregularity at the liquid-solid interaction. The highest values of removal efficiencies and the considerably lowest values of energy and electrode consumption proved that the electrocoagulation technology applies in wastewater treatment containing toxic metals. • The anode electrodes were perforated to decrease the amount of electrode consumption, while the cathode electrodes were not perforated. • The new EC reactor eliminated Pb-99.73%, Cd-98.54%, and Cu-98.92% of 200 mg/l of each metal at pH 10, applied current of 1.4 A, and reaction time of 60 min. Moreover, the consumption of energy and electrodes was significantly low. • The performance indicator (R 2 ) of the studied responses was higher than 0.95.

The performance of pharmaceutical wastewater treatment system of electrocoagulation assisted adsorption using perforated electrodes to reduce passivation

Removal of COD from real oily wastewater by electrocoagulation using a new configuration of electrodes

Investigation on operating parameters and cost using an electrocoagulation process for wastewater treatment

An economical electrocoagulation process of a hazardous anionic azo dye wastewater with the combination of recycled electrodes and solar energy

Alternative sequential combinations of electrocoagulation with electrooxidation and peroxi-coagulation for effective treatment of adhesive production industry wastewater

Treatment of Petroleum-Based Industrial Wastewater Using Electrocoagulation Technology

Electrocoagulation process for spent caustic treatment: Optimization, sludge analysis and economic studies

Hospital wastewater treatment using electrocoagulation: Performance, kinetics, settlement analysis, and cost-effectiveness

Domestic greywater treatment using electrocoagulation-electrooxidation process: optimisation and experimental approaches

Development of electrocoagulation process for wastewater treatment: optimization by response surface methodology

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

A critical review of state-of-the-art electrocoagulation technique applied to COD-rich industrial wastewaters

Pollutant Removal Efficiency of Electrocoagulation Method from Industrial Wastewater: Comparison with Other Treatment Methods and Key Operational Parameters—a Comparative Study Review

Phosphate Removal Efficiency and Life Cycle Assessment of Different Anode Materials in Electrocoagulation Treatment of Wastewater

Optimizing COD removal from greywater by photoelectro-persulfate process using Box-Behnken design: assessment of effluent quality and electrical energy consumption

COD removal, decolorization, and energy consumption of electrocoagulation as a wastewater treatment process

Process Optimization of Electrochemical Treatment of COD and Total Nitrogen Containing Wastewater

Ozone assisted alternating current-electrocoagulation technique for color and COD removal with determination of electrical energy from industrial wastewater

Electrochemical-based advanced oxidation for hospital wastewater treatment

Studying the effect of reactor design on the electrocoagulation treatment performance of oily wastewater

A Novel Method for Efficient Electrochemical Treatment of Actual Dyeing Wastewater With Energy Saving