Abstract:A simple and general Equivalent Dynamic Stiffness Mapping technique is proposed for identifying the parameters or the mathematical model of a nonlinear structural element with steady-state primary harmonic frequency response functions (FRFs). The Equivalent Dynamic Stiffness is defined as the complex ratio between the internal force and the displacement response of unknown element. Obtained with the test data of responses׳ frequencies and amplitudes, the real and imaginary part of Equivalent Dynamic Stiffness are plotted as discrete points in a three dimensional space over the displacement amplitude and the frequency, which are called the real and the imaginary Equivalent Dynamic Stiffness map, respectively. These points will form a repeatable surface as the Equivalent Dynamic stiffness is only a function of the corresponding data as derived in the paper. The mathematical model of the unknown element can then be obtained by surface-fitting these points with special functions selected by priori knowledge of the nonlinear type or with ordinary polynomials if the type of nonlinearity is not pre-known. An important merit of this technique is its capability of dealing with strong nonlinearities owning complicated frequency response behaviors such as jumps and breaks in resonance curves. In addition, this technique could also greatly simplify the test procedure. Besides there is no need to pre-identify the underlying linear parameters, the method uses the measured data of excitation forces and responses without requiring a strict control of the excitation force during the test. The proposed technique is demonstrated and validated with four classical single-degree-of-freedom (SDOF) numerical examples and one experimental example. An application of this technique for identification of nonlinearity from multiple-degree-of-freedom (MDOF) systems is also illustrated.

Fast computation and characterization of forced response surfaces via spectral submanifolds and parameter continuation

Nonautonomous spectral submanifolds for model reduction of nonlinear mechanical systems under parametric resonance

Data-Assisted Non-Intrusive Model Reduction for Forced Nonlinear Finite Elements Models

Automated Computation of Autonomous Spectral Submanifolds for Nonlinear Modal Analysis

Data-free Non-intrusive Model Reduction for Nonlinear Finite Element Models via Spectral Submanifolds

Explicit Backbone Curves from Spectral Submanifolds of Forced-Damped Nonlinear Mechanical Systems

Evaluation on Spectral Submanifold Based Reduced Models of a Rotor/stator Rubbing System with Cross-Coupling Stiffness

Run-Time Cutting Force Estimation Based on Learned Nonlinear Frequency Response Function

Data-Driven Reduction of the Finite-Element Model of a Tribomechadynamics Benchmark Problem

Nonlinear model identification and spectral submanifolds for multi-degree-of-freedom mechanical vibrations

Direct parametrisation of invariant manifolds for non-autonomous forced systems including superharmonic resonances

Integral Equations & Model Reduction For Fast Computation of Nonlinear Periodic Response

Forced response analysis of the rotor blade rows with the ROM-based aeroelastic model

A method for substructure decoupling of mechanical systems by using frequency response functions

Low-dimensional Data-based Surrogate Model of a Continuum-mechanical Musculoskeletal System Based on Non-intrusive Model Order Reduction

Full-Space Response Surface Method for Analysis of Structural Reliability

A time domain procedure for the identification of periodic structures

Data-driven modeling of subharmonic forced response due to nonlinear resonance

Equivalent Dynamic Stiffness Mapping Technique for Identifying Nonlinear Structural Elements from Frequency Response Functions

Response prediction for modified mechanical systems based on in-situ frequency response functions: Theoretical and numerical studies