Abstract:A detailed micromechanical finite element analysis methodology is presented to predict the transverse tensile (fiber perpendicular) failure behavior of a unidirectional (UD) glass fiber-reinforced plastic composite ply. In order to understand the constituent-level stress–strain and damage behavior, finite element analysis is accomplished using representative volume element (RVE) that consists of random fiber distribution as observed in the microscopic image of an actual composite ply. For modeling the fiber/matrix interface failure behavior, cohesive zone module (cohesive surface/cohesive element) of Abaqus® is used. In order to capture the epoxy matrix stiffness and strength degradation, the following two different approaches are used: (i) initially, the linear Drucker–Prager plasticity model in combination with a ductile fracture criterion is used; (ii) later, a brittle failure approach such as the quadratic normal stress criterion within the framework of eXtended finite element method is used. From the detailed micromechanical analysis of the RVE, it is observed that the initial damage in the RVE occurs in the form of fiber/matrix interface decohesion. With increasing tensile load, interface crack propagates and creates a stress concentration region in the matrix material, adjacent to the crack tip. Further load application causes both interface crack tip and matrix stress concentration to move away from the load application direction. As soon as the interface crack tip reaches approximately 60° to 70° away from the load application direction, the conjunction of the matrix damage with the interface crack leads to the RVE final failure. The predicted average stress–strain curves from the above-mentioned two different epoxy matrix failure criterions (ductile and brittle) correlate very well with the experimental results, indicating that the brittle failure behavior of a UD fiber-reinforced plastic composite ply under transverse tensile load is mainly controlled by the fiber/matrix interface properties.

High-fidelity computational micromechanics of composite materials using image-based periodic representative volume element

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Progressive failure analysis of 2D woven composites at the meso-micro scale

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Micromechanical Analysis of Mechanical Response for Unidirectional Fiber-Reinforced Plies

An innovative computational framework for the analysis of complex mechanical behaviors of short fiber reinforced polymer composites

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

3D Orthogonal Woven Carbon/Carbon Composites: Micromechanical Modeling and Damage Analysis

Micromechanical modeling of discontinuous long fiber reinforced composites

A new progressive damage model for predicting the tensile behavior of the three-dimensional woven carbon/carbon composites using micromechanics method

Comprehensive inter-fibre failure analysis and failure criteria comparison for composite materials using micromechanical modelling under biaxial loading

Initial Damage Induced by Thermal Residual Stress and Microscopic Failure Analysis of Carbon-Fiber Reinforced Composite under Shear Loading

Multiscale Image-Based Modelling of Damage and Fracture in Carbon Fibre Reinforced Polymer Composites

Computational micromechanical modeling of transverse tensile damage behavior in unidirectional glass fiber-reinforced plastic composite plies: Ductile versus brittle fracture mechanics approach

Image-Based RKPM for Accessing Failure Mechanisms in Composite Materials

Microscopic Progressive Damage Simulation of Unidirectional Composite Based on the Elastic–plastic Theory

A Numerical Method for Simulating the Microscopic Damage Evolution in Composites under Uniaxial Transverse Tension

A Progressive Damage Model for unidirectional Fibre Reinforced Composites with Application to Impact and Penetration Simulation

Continuum damage mechanics behavior of a carbon-fiber-reinforced epoxy composite fabricated by filament winding with different material and manufacturing conditions

Finite strain HFGMC analysis of damage evolution in nonlinear periodic composite materials