Abstract:The growing use of renewable energy accelerates research on energy storage systems (ESSs) to accommodate the distributed nature of power sources and fluctuation in supply and demand. The commercially adopted system for ESSs is lithium-ion batteries (LIBs), which are actively studied for recent years. However, the use of rare resources such as Li, Ni and Co, as well as volatile and flammable organic electrolytes, cause environmental problems and fire hazards. Therefore, new type of environmentally friendly and safe ESSs are needed to meet the future demand. In this regard, the aqueous zinc-ion hybrid supercapacitors (ZHSCs) are assumed as the remarkable candidate for ESSs. ZHSCs consist of battery-type Zn metal anode and capacitor-type carbon cathode with different ion storage mechanisms. Because they have unique design of electrodes, they can combine the advantages of existing batteries and supercapacitors such as high energy/power density and long cycle lifespans. In addition, the use of Zn metal has lots of benefits compare to Li-based electrodes, for example, Zn has low standard potential (-0.76 V vs. standard hydrogen electrode), high theoretical gravimetric/volumetric capacity (820 mAh g -1 and 5845 Ah/L) and relatively low cost. In ZHSCs, they store energy through an electric double-layer capacitive mechanism in which Zn 2+ ions or anions are adsorbed on the surface of carbon cathode while Zn 2+ ions are inserted/extracted in Zn metal anode, or a pseudo-capacitive mechanism generated by redox reaction with functional groups on the carbon surface. To achieve higher electrochemical performance of ZHSCs, previously reported research focused on modifying carbon cathode with highly porous structure or introducing heteroatoms. The porous carbon with abundant micropores (<2nm) and mesopores (2-50nm) can be used to provide high surface area for ions to adsorb/desorb and serve as channels for electrolytes and ions to diffuse rapidly. Besides, modifying surface of carbon cathode by doping heteroatoms (N, O, S, B, P) can improve wettability and conductivity of electrode and produce additional capacitance from redox reactions. However, although many researchers have studied to reform carbon cathode, they rarely study the effect of carbon’s morphology on its electrochemical performance. In the electrode level, irregularly shaped carbon could result in poor volumetric capacitance and high resistance properties caused by low mass loading and poor particle contact. The proposed morphology to solve these issues is spherical shape. As the spherical particles have no edges, they hardly damaged and have good powder fluidity between particles, leading to higher tap density or electrode density. They can also provide short diffusion path for ions to move compared to irregularly shaped particles, since the thin electrode can be made using the same amount of active material. This can enhance overall electrochemical performance of ZHSCs by lowering internal resistance and improving high rate capability of electrodes. In this respect, we suggest “spherical and uniform shape” carbon cathode along with the pore modification and heteroatom doping to compare the factors affecting electrochemical performance in ZHSCs. Thus, we prepared three different types of mesoporous carbons, which are spherical mesoporous carbon foam (S-MCF), N-doped spherical mesocellular carbon foam (S-MCF-N) and irregular shaped mesocellular carbon foam (MSUF-C). The improved electrode density of ZHSCs are achieved in spherically-controlled carbons (S-MCF and S-MCF-N) with 2.9 times higher tap density than irregularly shaped carbon (MSUF-C). Besides, the introduction of nitrogen to carbon (S-MCF-N) affords abundant active sites on the surface of carbon, increasing electrical conductivity and inducing additional pseudo-capacitance. Figure 1

A General Synthesis of Mesoporous Hollow Carbon Spheres with Extraordinary Sodium Storage Kinetics by Engineering Solvation Structure

Nitrogen and sulfur co-doped mesoporous hollow carbon spheres for high rate sodium ion storage

N, S Co-doped hierarchical porous carbon rods derived from protic salt: Facile synthesis for high energy density supercapacitors

Sandwich‐Shell Structured CoMn 2 O 4 /C Hollow Nanospheres for Performance‐Enhanced Sodium‐Ion Hybrid Supercapacitor

Study on Morphology Control and N-Doping of Porous Carbon Cathode for Zinc-Ion Hybrid Supercapacitor

Sustainable Synthesis of N‐Doped Hollow Porous Carbon Spheres Via a Spray‐Drying Method for Lithium‐Sulfur Storage with Ultralong Cycle Life

Heteroatom‐Doped Mesoporous Hollow Carbon Spheres for Fast Sodium Storage with an Ultralong Cycle Life

Sulfur‐Bridged Bonds Heightened Na‐Storage Properties in MnS Nanocubes Encapsulated by S‐Doped Carbon Matrix Synthesized via Solvent‐Free Tactics for High‐Performance Hybrid Sodium Ion Capacitors

Mesoporous carbon hollow sphere with dandelion‐like radial‐hierarchy for high‐performance supercapacitors

Carbon spheres with rational designed surface and secondary particle-piled structures for fast and stable sodium storage

Versatile Preparation of Mesoporous Single‐Layered Transition‐Metal Sulfide/Carbon Composites for Enhanced Sodium Storage

Micro/Meso-Porous Double-Shell Hollow Carbon Spheres through Spatially Confined Pyrolysis for Supercapacitors and Zinc-Ion Capacitor

The Multicomponent Synergistic Effect of Sandwich Structure Hierarchical Nanofibers for Enhanced Sodium Storage

Encapsulating Highly Crystallized Mesoporous Fe3O4 in Hollow N-doped Carbon Nanospheres for High-Capacity Long-Life Sodium-Ion Batteries

Surface Stretching Enables Highly Disordered Graphitic Domains for Ultrahigh Rate Sodium Storage

Optimized Co–S Bonds Energy and Confinement Effect of Hollow MXene@CoS2/NC for Enhanced Sodium Storage Kinetics and Stability

Enhanced reversible sodium storage by thin carbon layer encapsulated MoS2 nanospheres on interwoven carbon nanotubes

Hollow Mesoporous Carbon Spheres for High Performance Symmetrical and Aqueous Zinc-Ion Hybrid Supercapacitor

Hierarchical Metal Sulfide/Carbon Spheres: A Generalized Synthesis and High Sodium-Storage Performance.

Metal-electronegativity-induced sulfur-vacancies and heterostructures of MnS1-x/ZnS-NC@C with dual-carbon decoration for high-performance sodium-ion storage

Versatile Synthesis of Hollow‐structured Mesoporous Carbons by Enhanced Surface Interaction for High‐performance Lithium‐ion Batteries