Abstract:Surface wear, as a major failure mode of gear systems, is an unavoidable phenomenon during the whole life of gears. It also induces other gear damages, such as fatigue cracks, surface pitting and spalling. Ultimately, those defects may result in the sudden failure of a gearbox transmission system, which can lead to a serious accident and unexpected economic loss. Therefore, it can provide huge cost and safety benefits to industries to monitor gear wear and predict its propagation. Gear wear raises the error rate of gear transmission systems, typically leading to improvements in dynamic loads, vibration, and noise. In return, the increased load conversely aggravates wear, creating a feedback cycle between dynamic responses and surface wear. For this purpose, a wear prediction model was incorporated into a tribo-dynamic model for quantitatively investigating how surface wear and gear vibration are mutually affected by each other. To obtain more precise dynamic responses, the tribo-dynamic model integrates the time-varying mesh stiffness, load-sharing ratio and friction parameters. To improve the computational efficiency and guarantee the calculation precision, an improved and updated wear depth methodology is constructed in the wear prediction model. This paper demonstrates the capability of the proposed dynamic wear prediction model in the investigation of the interaction effects between gear dynamics and surface wear, allowing for the development of improved gear wear prediction tools. The obtained results indicate that the surface wear impacts the dynamic characteristics, even with slight wear. In the initial stage of wear, the friction coefficient decreases slightly, largely due to the reduction in surface roughness; but the friction force increases because of the improved dynamic meshing force. Although the initial wear depth distributions of a pinion under dynamic and static conditions are similar, the wear depth distributions under dynamic conditions becomes significantly different compared to the those under static conditions with the wear process. The maximum wear depth of a pinion under dynamic conditions is about 1.6 times as the corresponding static conditions, when the wear cycle comes to . Similarly, the maximum accumulative wear depth of a pinion under dynamic conditions reaches 1.2 times of that under static conditions. Therefore, the proposed dynamic wear prediction model is more appropriate to be applied to the surface wear of gears.

Statistically Interpretable Health Indicator Based on Dynamic Interactions Decoupling for Gear Wear Assessment

A novel vibration-based prognostic scheme for gear health management in surface wear progression of the intelligent manufacturing system

A cyclostationarity-based wear monitoring framework of spur gears in intelligent manufacturing systems

Digital twin-driven intelligent assessment of gear surface degradation

A Dynamic Wear Prediction Model for Studying the Interactions between Surface Wear and Dynamic Response of Spur Gears

Development of a gear vibration indicator and its application in gear wear monitoring

A novel gear fatigue monitoring indicator and its application to remaining useful life prediction for spur gear in intelligent manufacturing systems

Gear Wear Prediction Based on the Theorem of Degradation Entropy Generation

Investigation on Coupling Effects Between Surface Wear and Dynamics in A Spur Gear System

Quantification of Condition Indicator Performance on a Split Torque Gearbox

Sensor-integrating gears: wear detection by in-situ MEMS acceleration sensors

Deterioration state diagnosis and wear evolution evaluation of planetary gearbox using vibration and wear debris analysis

Hob wear state condition monitoring based on statistical distribution law

A novel gear RUL prediction method by diffusion model generation health index and attention guided multi-hierarchy LSTM

The Development and Experimental Validation of a Real-Time Coupled Gear Wear Prediction Model Considering Initial Surface Topography, Dynamics, and Thermal Deformation

A Method for Health Indicator Evaluation for Condition Monitoring of Industrial Robot Gears

An Improved Modeling and Numerical Analysis Method for Tooth Surface Wear of Double-Arc Harmonic Gears

A life-cycle dynamic wear degradation model of planetary gear systems

A novel HI construction method based on healthy-state data training for rotating machinery components

A New Health Condition Detection Method for Planetary Gears Based on Modified Distributed Compressed Sensing and Multiscale Symbol Dynamic Entropy

Definition of Signal-to-Noise Ratio of Health Indicators and Its Analytic Optimization for Machine Performance Degradation Assessment