Abstract:Manganese-Cobalt Oxide (MCO) spinel oxide is a promising composition as a protective coating for the metallic interconnects of a SOFC. In an effort to reach better properties, such as suitable thermal expansion match, good electrical conductivity, and fine structural stability, various elements have been doped in the spinel structure. In this study, the effect of Cu addition as a dopant on the electrical properties of MCO spinel is investigated. Powders with a nominal composition Cux(Mn1.5-x/2Co1.5-x/2)O4 (x=0, 0.15, and 0.3) were successfully synthesized based on the sol-gel Pechini method. The phase composition and microstructure of the synthesized powder were characterized by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). The XRD results revealed that a pure phase with a spinel structure was obtained for different amounts of doped samples. The microstructural characteristics of the synthesized powders revealed that the average particle size of the powder decreased from about 84nm to 52nm with the introduction of Cu. To evaluate the effect of Cu on the sintering behavior of MCO, the powder was pressed and sintered at 1200°C for 2h. The density measurement and FESEM results showed that the addition of Cu promotes the sintering mechanism, and the density was improved. In addition, the electrical properties of the samples were evaluated using the 2probe direct current technique at different temperatures. The results revealed that the addition of 0.3 Cu increased the electrical conductivity of the sample from 0.102 to 0.218 S.cm-1 at 800°C. This significant improvement can be attributed to the promotion of sintering and also facilitating electron flow by substitution of Cu+2 cations in the spinel structure.

First-principles study of point defect diffusion in CoMn2O4 crystal

Understanding the electronic and ionic conduction and lithium over-stoichiometry in LiMn$_2$O$_4$ spinel

Intrinsic Defects in LiMn 2 O 4 : First-Principles Calculations

First-principles study of chromium diffusion in the ferritic Fe-Cr alloy

Lattice‐Cell Orientation Disorder in Complex Spinel Oxides

Highly Conductive Mn-Co Spinel Powder Prepared by Cu-Doping Used for Interconnect Protection of SOFC

Theoretical examination of defect structures and spin Hamiltonian parameters of manganese (II)- and cobalt (II)-doped ZnO nanowires

Effects of Intrinsic Defects on the Electronic Structure and Magnetic Properties of CoFe 2 O 4 : A First-Principles Study

First-principles study of native point defects in LiNi(1/3)Co(1/3)Mn(1/3)O2 and Li2MnO3

Effects of Transition Metals on the Electrical Conductivity of M-Doped MnCo2O4 (M = Cu, Ni, Zn) As Contact Layer on Precoated SUS441 in Solid Oxide Cells

Oxidation behavior of Cu-doped MnCo 2 O 4 spinel coating on ferritic stainless steels for solid oxide fuel cell interconnects

Effect of Rare Earth Y and Metal X (Co, Mn, Ni, Cu) Elements on Cr Diffusion Behavior of SOFC Metallic Interconnect

The electrical property of MnCo2O4 and its application for SUS 430 metallic interconnect

Cu doped Mn-Co spinel protective coating on ferritic stainless steels for SOFC interconnect applications

Role of Point Defects in Spinel Mg Chalcogenide Conductors

Effect of Mn2+ Substitution Doped Lattice Zn on Intrinsic Point Defects of ZnO Varistor Ceramics Based on First Principles

Synthesis and characterization of nanostructured Cux (Mn1.5-x/2Co1.5-x/2)O4 as an interconnect coating for solid oxide fuel cell

Influence of Co-Nb Defects on the Conductive Performance of Sr2CoxNb2-xO6-delta by the First Principles

Defect chemistry in layered transition-metal oxides from screened hybrid density functional calculations

Interplay between strain, defect charge state and functionality in complex oxides

Electronic Structure and P-Type Conduction Mechanism of Spinel Cobaltite Oxide Thin Films