Abstract:Despite exhibiting a substantially higher computational efficiency than the transient‐motion electromagnetic field time‐stepping FE model, the sinusoidal steady‐state electromagnetic field FE model does not comprehensively and reasonably consider several key factors, such as tooth and slot effects, the main magnetic field, and the armature reaction. Consequently, the magnetic field, damper bar loss, and heat derived from this model exhibit considerable deviations from the on‐site generator observations. In comparison, the transient‐motion electromagnetic field time‐stepping FE model, owing to its ability to consider these influencing factors, provides more comprehensive and reasonable results. This study investigates the effect of electromagnetic field models on tubular hydro‐generator damper winding losses and heat calculations using an on‐site 36‐MW such generator as an example. Sinusoidal steady‐state and transient‐motion electromagnetic field models were established to analyze damper winding losses and heat. Results indicate that, despite exhibiting a substantially higher computational efficiency than the transient‐motion electromagnetic field time‐stepping FE model, the sinusoidal steady‐state electromagnetic field FE model does not comprehensively and reasonably consider several key factors, such as tooth and slot effects, the main magnetic field, and the armature reaction. Consequently, the magnetic field, damper bar loss, and heat derived from this model exhibit considerable deviations from the on‐site generator observations. In comparison, the transient‐motion electromagnetic field time‐stepping FE model, owing to its ability to consider these influencing factors, provides more comprehensive and reasonable results.

Influence of stator and rotor core material definition method on no‐load electromagnetic field calculation results for tubular hydrogenerator

Unbalanced Magnetic Torque in Electrohydraulic Energy Conversion Unit Considering Rotor Axis Deflection

3-D Eddy Current Analysis in the End Region of a Turbogenerator by Using Reduced Magnetic Vector Potential

Loss Estimation of Brushless Doubly-Fed Generator with Hybrid Rotor Considering Multiple Influence Factors

The influence of electromagnetic field models on the damper winding loss and heat calculation results of tubular hydro‐generator

Magnetic Field Characteristics and Stator Core Losses of High-Speed Permanent Magnet Synchronous Motors

Design and Analysis of a Transverse-flux Permanent Magnet Motor With Hybrid Iron-core

3D Eddy Current and Temperature Field Analysis of Large Hydro-Generators in Leading Phase Operations

3D finite element study of transient electromagnetic forces acting on the stator end-windings of a large turbo-generator

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Numerical Calculation and Analysis of Stator Iron Losses Due to Rotational Flux and Magnet Pole Eddy-Current Loss in PMSM

Effects of Core Magnetic Reluctance on Inductance Calculations for a Single Coil in a Large Hydro-Generator

Influence of Stator Core Materials on Electromagnetic Performance of YASA Type Axial Flux Permanent Magnet Machines

Study on the Electromagnetic Field and Losses in the End Zone of Large Hydraulic Generators by FEM

Consideration of Design and Operation on Rotational Flux Density Distributions in Hydrogenerator Stators

Comparison of Different Simulating Calculation Methods for Electric Fields along the Stator End-winding of HV Rotating Machine

Mathematical model to analyze the anisotropic magnetic field in the end region of hydraulic generators

Permanent magnet generator 3D transient temperature field analysis based on magnetic-thermal element coupling algorithm

The Calculation of Stator Iron Losses and Magnet Pole Eddy-Cyrrent Loss for PMSM and Influence on Temperature Field Distribution

Calculation of core loss under distorted flux density with minor hysteresis loops for laminated steel structure

A Novel Nonlinearly Equivalent Circuit Model for Calculating Electric Fields Along the Stator End-winding of HV Rotating Machine