Abstract:The fluid flow is solved through the finite element discretization of the Navier–Stokes equations, using the semi‐Lagrangian method to treat the advective term. A decoupled mesh method based on front‐tracking is used to simulate two‐phase flows. A coalescence model based on geometric parameters is introduced, and coalescence of circular and Taylor bubbles is presented. This work aims at presenting a new computational approach to study two and three dimensional two‐phase flows and two dimensional coalescence phenomenon using direct numerical simulation. The flows are modeled by the incompressible Navier–Stokes equations, which are approximated by the finite element method. The Galerkin formulation is used to discretize the Navier–Stokes equations in the spatial domain and the semi‐Lagrangian method is used to discretize the material derivative. In order to satisfy the Ladyzhenskaya–Babuška–Brezzi condition, high‐order stable pair of elements are used, with pressure and velocity fields being calculated on different degrees of freedom in the unstructured mesh nodes. The interface is modeled by an unfitted adaptive moving mesh, where interface nodes are tracked in a Lagrangian fashion and moved with the velocity solution of the fluid motion equations. The surface tension is computed using the interface curvature and the gradient of a Heaviside function, and added in the momentum equations as a body force. In order to avoid undesired spurious modes at the interface due to high property ratios, a smooth transition between fluid properties is defined on the interface region. Several benchmark tests have been carried out to validate the proposed approach, and the obtained results have demonstrated agreement with analytical solutions and numerical results reported in the literature. A coalescence model is also proposed based on geometric criteria and results show interesting dynamics.

Directionally‐split volume‐of‐fluid technique for front propagation under curvature flow

A variational volume-of-fluid approach for front propagation

Development of a Volume of Fluid Method for Computing Interfacial Incompressible Fluid Flows

A Volume of Fluid Method Algorithm for Simulation of Surface Tension Dominant Two-Phase Flows

Application of Bounded and Compressed VOF Method to Interfacial Flow

A Generalized Coupled Level Set/volume-of-fluid/ghost Fluid Method for Detailed Simulation of Gas-Liquid Flows.

A Coupled Volume-of-fluid and Level Set Method Based on General Curvilinear Grids with Accurate Surface Tension Calculation

On a Family of Unsplit Advection Algorithms for Volume-of-Fluid Methods.

A Generalized Variational Level Set Method Without Frequent Reinitialization for Simulations of Gas-Liquid Flows.

A Three Dimensional Coupled VOF and Level Set (VOSET) Method with and Without Phase Change on General Curvilinear Grids

A coupled VOF/embedded boundary method to model two-phase flows on arbitrary solid surfaces

Volume of Fluid Method: A Brief Review

Curvature-driven flows: a variational approach

A Geometric VOF Method for Interface Flow Simulations

A volume of fluid method for simulating fluid/fluid interfaces in contact with solid boundaries

Volume of fluid (VOF) method for the dynamics of free boundaries

A combined VOF-RANS approach for studying the evolution of incipient wind-generated waves over a viscous liquid

An unstructured geometrical un-split VOF method for viscoelastic two-phase flows

A coupled volume-of-fluid and level set (VOSET) method for computing incompressible two-phase flows

Computation of Deformable Interface Two‐Phase Flows: A Semi‐Lagrangian Finite Element Approach

A hybrid continuum surface tension force for the three-phase VOF method