Abstract:: The interfacial mass transfer characteristics of the gas-oil miscibility process are important in gas flooding technology to improve oil recovery. In this study, the process of gas flooding with actual components of Jilin oilfield is investigated by using molecular dynamics simulation method. We have chosen several alkane molecules based specifically on the actual components of crucial oil as the model oil phase for our study. The pressure of the gas phase is adjusted by changing the number of gas molecules while keeping the oil phase constant in the simulation. After the simulation, we analyze the variations of density in the gas-oil phase and interfacial characteristics to obtain the minimum miscibility pressure (MMP) for different displacement gases. The results show that the density of the gas phase increases while the density of the oil phase decreases with an increase in the displacement gas pressure, resulting in efficient mixing between the gas phase and the oil phase. At higher gas pressures, the thickness of the interface between the gas and oil phases is higher while the interfacial tension is lower. At the same time, we observed that the higher the CO 2 content in the displacement phase, the thicker the oil-gas interface becomes and the better the oil-gas mixing is under the same gas pressure. In this work, the gas-oil miscibility is studied with pure CO 2 , pure N 2 , and the mixture of these two gases, and it is found that the minimum miscibility pressure for pure CO 2 flooding (22.3 MPa) is much lower than that for pure N 2 flooding (119.0 MPa). When these two gases are mixed in 1 : 1 ratio, the MMP (50.7 MPa) is between the MMPs of the two pure gases. Moreover, the pressure required with CO 2 is lower than that required with N 2 to achieve the same displacement effect. Finally, we explain the mechanisms of the different miscibility processes for different gas pressure and different displacement gases from the perspective of the total energy of the system and the potential of the mean force between the gas and the oil. The total energy of the system increases with the pressure of the gas phase, implying that the number of collisions between the oil and gas molecules increases and the gas-oil miscibility is enhanced. In addition, by analyzing the potential of mean force profiles, it can be concluded that the force of attraction between the oil-phase molecules and CO 2 molecules is greater than that between the oil-phase molecules and N 2 molecules; thus, the CO 2 molecules easily mix with oil, and the effect of displacement is more obvious. These results are of great significance for understanding the interfacial mass transfer characteristics of the gas-oil miscibility process and for guiding the optimization and design of enhanced oil recovery technology by gas flooding.

The miscible behaviors and mechanism of CO2/CH4/C3H8/N2 and crude oil in nanoslits: A molecular dynamics simulation study

Dynamics and miscible behaviors of hydrocarbon gas and crude oil in nanoslits: Effects of light gas type and crude oil components

The Miscible Behaviors of C3H8/C8H18(C7H17N) System in Nanoslits: Effects of Pore Size and Rock Surface Wettability

The Miscible Behaviors of C10H22(C7H17N)/C3H8 System: Insights from Molecular Dynamics Simulations

Insight into miscibility mechanism of multiple components crude oil in CO2/CH4 by molecular dynamic simulation

Miscibility Process Of Hydrocarbon Mixture Gas And Crude Oil: Insights From Molecular Dynamics

Miscibility Characteristics of CO2-Oil in Tight Sandstone Reservoirs: Insights from Molecular Dynamics Simulations

Molecular Insight into the Miscible Mechanism of CO2/C10 in Bulk Phase and Nanoslits

Molecular Dynamics Simulation of Miscible Process in CO2 and Crude Oil System

Molecular dynamics simulation on the displacement behaviour of crude oil by CO2/CH4 mixtures on a silica surface

Molecular dynamics simulation of CO2 dissolution-diffusion in multi-component crude oil

Static and Dynamic Behavior of CO2 Enhanced Oil Recovery in Nanoslits: Effects of Mineral Type and Oil Components

Molecular Insights into CO2 Diffusion Behavior in Crude Oil

Molecular dynamics simulation of CO2-oil miscible fluid distribution and flow within nanopores

Interfacial Interactions Between Bakken Crude Oil and Injected Gases at Reservoir Temperature: A Molecular Dynamics Simulation Study

Molecular insight into the interfacial microstructural and miscible behavior of CO 2 flooding in tight reservoir

Interfacial Mass Transfer Characteristics and Molecular Mechanism of the Gas-Oil Miscibility Process in Gas Flooding

CO2-oil diffusion, adsorption and miscible flow in nanoporous media from pore-scale perspectives

Molecular Dynamics Simulation to Estimate Minimum Miscibility Pressure for Oil with Pure and Impure CO2

Mixing Processes and Patterns of Fluids in Alkane-Co2-water Systems under High Temperature and High Pressure-Microscopic Visual Physical Thermal Simulations and Molecular Dynamics Simulations

Effect of Surface Wettability on the Miscible Behaviors Of Co2-Hydrocarbon in Shale Nanopores