Abstract:Controlled fabrication of metal nanospheres on nanotube tips for optical antennas is investigated experimentally. Resembling soap bubble blowing using a straw, the fabrication process is based on nanofluidic mass delivery at the attogram scale using metal-filled carbon nanotubes (m@CNTs). Two methods have been investigated including electron-beam-induced bubbling (EBIB) and electromigration-based bubbling (EMBB). EBIB involves the bombardment of an m@CNT with a high energy electron beam of a transmission electron microscope (TEM), with which the encapsulated metal is melted and flowed out from the nanotube, generating a metallic particle on a nanotube tip. In the case where the encapsulated materials inside the CNT have a higher melting point than what the beam energy can reach, EMBB is an optional process to apply. Experiments show that, under a low bias (2.0-2.5 V), nanoparticles can be formed on the nanotube tips. The final shape and crystallinity of the nanoparticles are determined by the cooling rate. Instant cooling occurs with a relatively large heat sink and causes the instant shaping of the solid deposit, which is typically similar to the shape of the molten state. With a smaller heat sink as a probe, it is possible to keep the deposit in a molten state. Instant cooling by separating the deposit from the probe can result in a perfect sphere. Surface and volume plasmons characterized with electron energy loss spectroscopy (EELS) prove that resonance occurs between a pair of as-fabricated spheres on the tip structures. Such spheres on pillars can serve as nano-optical antennas and will enable devices such as scanning near-field optical microscope (SNOM) probes, scanning anodes for field emitters, and single molecule detectors, which can find applications in bio-sensing, molecular detection, and high-resolution optical microscopy.

Titania-Based Spherical Mie Resonators Elaborated by High-Throughput Aerosol Spray: Single Object Investigation

Tuning Multipolar Mie Scattering of Particles on a Dielectric-Covered Mirror

Mie Resonant Metal Oxide Nanospheres for Broadband Photocatalytic Enhancements

Tailoring Mie Resonances in Cupric Oxide Particles for Use as Nanoantennas

Tailoring Unidirectional Angular Radiation Through Multipolar Interference in a Single-Element Subwavelength All-Dielectric Stair-Like Nanoantenna.

Metaparticles: Dressing Nano-Objects with a Hyperbolic Coating

Direct and High-Throughput Fabrication of Mie-Resonant Metasurfaces via Single-Pulse Laser Interference

Nanoresonator based dielectric surfaces for light manipulation

Giant Distributed Optical-Field Enhancements From Mie-Resonant Lattice Surface Modes In Dielectric Metasurfaces

Embossed Mie resonator arrays composed of compacted TiO2 nanoparticles for broadband anti-reflection in solar cells

Mie-scattering controlled all-dielectric resonator-antenna for bright and directional point dipole emission

Spectrally resolved resonant propulsion of dielectric microspheres

Electromagnetic Resonance‐Modulated Magnetic Emission in Europium‐Doped Sub‐Micrometer Zirconia Spheres

Silicon Mie resonators for highly directional light emission from monolayer MoS2

Probing the optical near-field interaction of Mie nanoresonators with atomically thin semiconductors

Laser-printed hemispherical silicon Mie resonators

Resonant Scattering Manipulation of Dielectric Nanoparticles

Designing Si sphere metagratings: From perfect reflection to large-angle diffraction

Metal-filled Carbon Nanotube Based Optical Nanoantennas: Bubbling, Reshaping, and in Situ Characterization