Freeze-Dried β-Glucan and Poly-γ-glutamic Acid: An Efficient Stabilizer to Strengthen Subgrades of Low Compressible Fine-Grained Soils with Varying Curing Periods

Muralidaran Vishweshwaran,Evangelin Ramani Sujatha,Jair Arrieta Baldovino

DOI: https://doi.org/10.3390/polym16111586

IF: 5

2024-06-04

Polymers

Abstract:The freeze-drying of biopolymers presents a fresh option with greater potential for application in soil subgrade stabilization. A freeze-dried combination of β-glucan (BG) and γ-poly-glutamic acid (GPA) biopolymers was used to treat low compressible clay (CL) and low compressible silt (ML) soils in dosages of 0.5%, 1%, 1.5%, and 2%. The California bearing ratio (CBR) test for the treated specimens was performed under three curing conditions: (i) thermal curing at 60 °C, (ii) air-curing for seven days followed by submergence for 4 days, and (iii) no curing, i.e., tested immediately after mixing. To investigate the influence of shear strength on the freeze-dried biopolymer-stabilized soil specimens and their variations with aging, unconfined compressive strength (UCS) tests were conducted after thermal curing at 60 °C for 3 days, 7 days, and 7 days of thermal curing followed by 21 days of air curing. The maximum CBR of 125.3% was observed for thermally cured CL and a minimum CBR of 6.1% was observed under soaked curing conditions for ML soils. Scanning electron microscopy (SEM), infrared spectroscopy, average particle size, permeability, and adsorption tests revealed the pore filling, biopolymer adsorption and coating on the soil surface, and agglomeration of the soil along with the presence of hydrogen bonds, covalent amide bonds, and Van der Waals forces that contributed to the stiffening of the stabilized soil. Using three-dimensional (3D) finite element analysis (FEA) and layered elastic analysis (LEA), a mechanistic–empirical pavement design was carried out for the stabilized soil and a design thickness catalog was prepared for the maximum CBR. The cost reductions for a 1 km section of the pavement were expected to be 12.5%.

polymer science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to use two biopolymers, freeze - dried β - glucan (BG) and γ - polyglutamic acid (GPA), to enhance the bearing capacity of low - compressibility fine - grained soils (including low - compressibility clay CL and low - compressibility silt ML), so as to improve the applicability of these soils as subgrade materials. Specifically, the study treats these soils with different dosages of BG and GPA and conducts tests under different curing conditions, aiming to evaluate the influence of these biopolymers on the mechanical properties, permeability and other engineering properties of the soil, thereby providing an economical, environmentally - friendly and effective soil improvement method, reducing road construction costs and improving the durability and stability of roads.