Enhancing the Thermal Resistance of UV-Curable Resin Using (3-Thiopropyl)polysilsesquioxane

Daria Pakuła,Bogna Sztorch,Monika Topa-Skwarczyńska,Karolina Gałuszka,Joanna Ortyl,Bogdan Marciniec,Robert E. Przekop

DOI: https://doi.org/10.3390/ma17102219

IF: 3.4

2024-05-09

Materials

Abstract:This study delineates a methodology for the preparation of new composites based on a photocurable urethane-acrylate resin, which has been modified with (3-thiopropyl)polysilsesquioxane (SSQ-SH). The organosilicon compound combines fully enclosed cage structures and incompletely condensed silanols (a mixture of random structures) obtained through the hydrolytic condensation of (3-mercaptopropyl)trimethoxysilane. This process involves a thiol-ene "click" reaction between SSQ-SH and a commercially available resin (Ebecryl 1271®) in the presence of the photoinitiator DMPA, resulting in composites with significantly changed thermal properties. Various tests were conducted, including thermogravimetric analysis (TGA), Fourier transmittance infrared spectroscopy (FT-IR), differential scanning calorimetry (Photo-DSC), and photoreological measurement mechanical property, and water contact angle (WCA) tests. The modification of resin with SSQ-SH increased the temperature of 1% and 5% mass loss compared to the reference (for 50 wt% SSQ-SH, T5% was 310.8 °C, an increase of 20.4 °C). A composition containing 50 wt% of SSQ-SH crosslinked faster than the reference resin, a phenomenon confirmed by photorheological tests. This research highlights the potential of new composite materials in coating applications across diverse industries. The modification of resin with SSQ-SH not only enhances thermal properties but also introduces a host of functional improvements, thereby elevating the performance of the resulting coatings.

materials science, multidisciplinary,metallurgy & metallurgical engineering,physics, applied,chemistry, physical, condensed matter

What problem does this paper attempt to address?

The main problem this paper attempts to address is the improvement of the thermal stability of UV-curable resins. Specifically, the authors aim to enhance the thermal performance of photopolymerizable urethane acrylate resins by adding (3-mercaptopropyl) polysiloxane (SSQ-SH). This modification method not only improves the heat resistance of the material but also introduces a series of functional improvements, such as enhanced mechanical properties and changes in water contact angle. Various tests, such as thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (Photo-DSC), and photorheological measurements, were conducted to study the performance changes of these modified resins. The results show that the composite material containing 50 wt% SSQ-SH exhibited a 20.4°C increase in the 5% mass loss temperature compared to the unmodified resin, indicating that the addition of SSQ-SH significantly enhances the thermal stability of the resin.