Abstract:This work presents a new methodology to estimate the motion-induced standard deviation and related turbulence intensity on the retrieved horizontal wind speed by means of the velocity-azimuth-display algorithm applied to the conical scanning pattern of a floating Doppler lidar. The method considers a ZephIRTM300 continuous-wave focusable Doppler lidar and does not require access to individual line-of-sight radial-wind information along the scanning pattern. The method combines a software-based velocity-azimuth-display and motion simulator and a statistical recursive procedure to estimate the horizontal wind speed standard deviation—as a well as the turbulence intensity—due to floating lidar buoy motion. The motion-induced error is estimated from the simulator’s side by using basic motional parameters, namely, roll/pitch angular amplitude and period of the floating lidar buoy, as well as reference wind speed and direction measurements at the study height. The impact of buoy motion on the retrieved wind speed and related standard deviation is compared against a reference sonic anemometer and a reference fixed lidar over a 60-day period at the IJmuiden test site (the Netherlands). Individual case examples and an analysis of the overall campaign are presented. After the correction, the mean deviation in the horizontal wind speed standard deviation between the reference and the floating lidar was improved by about 70%, from 0.14 m/s (uncorrected) to −0.04 m/s (corrected), which makes evident the goodness of the method. Equivalently, the error on the estimated turbulence intensity (3–20 m/s range) reduced from 38% (uncorrected) to 4% (corrected).

An ADCP Attitude Dynamic Errors Correction Method Based on Angular Velocity Tensor and Radius Vector Estimation

Error Analysis and Correction of ADCP Attitude Dynamics under Platform Swing Conditions

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Three-dimensional Dynamic Non-Contact Attitude Detection System Based on Optical Path Deflection Technology

Improving Accuracy of Horizontal Flow Field Using Acoustic Tomography with Real-Time Station Position Correction

Error analysis of ADCP velocity measurement caused by riser vibration

A Simple and Precise Correction Method for DVL Measurements under the Dynamic Environment.

Analysis and Compensation of ADCP Current Direction Error Caused by Ambient Magnetic Field

Dynamic Optimization Method for Broadband ADCP Waveform with Environment Constraints

A Correction Method for DVL Measurement Error by Pitch Dynamics

Theoretical Advances in Current Estimation and Navigation from a Glider-Based Acoustic Doppler Current Profiler (ADCP)

Dynamic measurement of high-frequency deflections of the vertical based on the observation of INS/GNSS integration attitude error

Estimation of the Motion-Induced Horizontal-Wind-Speed Standard Deviation in an Offshore Doppler Lidar

Dynamic Attitude Inertial Measurement Method for Typical Regions of Deck Deformation

AUV instantaneous velocity estimation method based on azimuth and Doppler shift

Doppler velocity estimation based on the Random Sample Consensus considering a prior dynamic model

Attitude Estimation Method for Target Ships Based on LiDAR Point Clouds Via an Improved RANSAC

Dynamics Analysis Of Adcp Carrier And Its Mooring System

Analysis of the Influence of Attitude Error on Underwater Positioning and Its High-Precision Realization Algorithm

Inversion Method for Low-Altitude Wind Profile Based on Floating Doppler Lidar

Identification and correction of layer depth and water depth data measured by ADCP