Biomechanical evaluation and optimal design of a pedicle screw with double bent rods internal fixation system based on PE-PLIF fusion
Lei Ma,Yang Yan,Xiyu Wang,Songyuan Wang,Feng Li,Kai Zhang,Xuanze Fan,Hao Zhong,Xinqi Lou,Xiaogang Wu,Yanru Xue,Yanqin Wang,Liming He,Ruizhong Yan,Weiyi Chen
DOI: https://doi.org/10.1080/10255842.2023.2245517
Abstract:Problems, such as broken screws, broken rods, and cage subsidence after clinical spinal fusion surgery affect the success rate of fusion surgery and the fixation effect of fusion segments, and these problems still affect the treatment and postoperative recovery of patients. In this study, we used the biomechanical finite element analysis method to analyze and study the fixation effect of three kinds of spinal internal fixation systems on L4-L5 lumbar spine segments in percutaneous endoscopic posterior lumbar interbody fusion (PE-PLIF). The three different fixation systems compared in this study include bilateral pedicle screw fixation (M1); bilateral pedicle screw with cross-link fixation (M2); bilateral pedicle screws with double bent rods fixation (M3). The internal fixation systems with different structures were analyzed with the help of Hypermesh, and Abaqus. It was found that the internal fixation system with double bent rods reduced screw stresses by 23.8 and 22.2% in right and left axial rotation than the traditional bilateral pedicle screw system, while titanium rod stresses were reduced by 9.6, 3.7, 9.6, and 2.9% in flexion, left and right lateral bending, and right axial rotation, respectively, and L5 upper endplate stresses were reduced by 35.5, 18.9, 38.4, 10.2, and 48.3% in flexion, left and right lateral bending, and left and right axial rotation, respectively. The spinal range of motion (ROM) of the M3 internal fixation system was less than that of the M1 and M2 internal fixation systems in left lateral bending, left lateral rotation, and right axial rotation, and the intact vertebral ROM was reduced by 93.7, 94.9, and 90.9%, respectively. The double bent rod structure of the spinal internal fixation system has better biomechanical properties, which can effectively reduce the risk of screw breakage, loosening, cage subsidence, and endplate collapse after fusion surgery.