Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Acceptor Modulation Strategies for Improving the Electron Transport in High‐Performance Organic Field‐Effect Transistors

Synergistic Use of All-Acceptor Strategies for the Preparation of an Organic Semiconductor and the Realization of High Electron Transport Properties in Organic Field-Effect Transistors

Unravelling the Role of Electron Acceptors for the Universal Enhancement of Charge Transport in Quinoid‐Donor‐Acceptor Polymers for High‐Performance Transistors

Acceptor-Quantity Modulation Strategy for High-Performance Ambipolar Semiconducting Polymers: from Dual-Acceptor to Quad-Acceptor Backbone

Donor-Acceptor-Based Organic Polymer Semiconductor Materials to Achieve High Hole Mobility in Organic Field-Effect Transistors

Donor–Acceptor‐Conjugated Polymer for High‐Performance Organic Field‐Effect Transistors: A Progress Report

Research Progress in Donor-Acceptor Copolymers Field-Effect Transistors

A Hybrid Acceptor‐Modulation Strategy: Fluorinated Triple‐Acceptor Architecture for Significant Enhancement of Electron Transport in High‐Performance Unipolar n‐Type Organic Transistors

Diketopyrrolopyrrole-based Acceptor-Acceptor Conjugated Polymers: the Importance of Comonomer on Their Charge Transportation Nature

Toward Efficient Charge Transport of Polymer-Based Organic Field-Effect Transistors: Molecular Design, Processing, and Functional Utilization

Recent Advances on π-Conjugated Polymers as Active Elements in High Performance Organic Field-Effect Transistors

Isomeric Acceptor–Acceptor Polymers: Enabling Electron Transport with Strikingly Different Semiconducting Properties in n -Channel Organic Thin-Film Transistors

Recent Progress in Design of Conductive Polymers to Improve the Thermoelectric Performance

Editorial: High-Performance Organic Thin-Film Transistors

Tuning the Charge‐Transport Property of Pyromellitic Diimide‐Based Conjugated Polymers Towards Efficient Field‐Effect Transistors

Rational Molecular Design of Diketopyrrolopyrrole‐Based n‐Type and Ambipolar Polymer Semiconductors

Acceptor–acceptor-type conjugated polymer semiconductors

An unprecedented quinoid–donor–acceptor strategy to boost the carrier mobilities of semiconducting polymers for organic field-effect transistors

Dimeric Acceptors Using Different Central Linkers to Manipulate Electronic and Morphological Properties

Electron Transporting Semiconducting Polymers in Organic Electronics

Improved Transistor Performance by Modulating Molecular Packing with Donor and Acceptor Moieties.