Abstract:The performance of fresh (PdV/TiO2), sulfur poisoned (Used-S and Used-H), and regenerated (Used-RS and Used-RH) multi-active center catalysts for chlorobenzene catalytic oxidation and selective catalytic reduction (CBCO + SCR) reaction is investigated. The reaction on the catalyst surface is blocked after sulfur poisoning owing to the occupation and deposition of catalyst active centers (mainly Pd centers) by PdSO4 (and/or PdS in a dry environment) and NH4HSO4 species, especially the CBCO process. Sulfates (mainly NH4HSO4) on the sulfur poisoned catalyst surface are partially decomposed after 400 °C thermal regeneration, while the deactivation caused by the formation of PdSO4 species is irreversible. Density functional theory calculation results show that in the PdSO4 and NH4HSO4 generation paths, each step of the elementary reaction has just a small energy barrier to overcome, and the stability of the product for each elementary reaction increases gradually. Even worse, SO2 is easily combined with H2O gas molecules to form H2SO3 in a humid environment, and the energy barrier for conversion of SO32– to SO42– is just 0.041 eV. The two oxygen vacancies (VOx-1 or TiOx-1) provide adsorption sites for CBCO + SCR reaction gas molecules but do not exhibit adsorption properties for SO2, which gives a possible idea for optimization of sulfur resistance. The present work is favorable for further synergistic removal of CB/NOx by the catalyst for anti-SO2 poisoning modification and application in the manufacture industry.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.est.1c03617.Details of the Section 2 in this work; reaction condition information, general properties, gaseous reaction byproducts, and Raman analysis; HRTEM image and pyridine-IR profile (Figure S1); basic information of the Pd0.12V4/TiO2 catalyst (Table S1); CB TOF (Table S2); NO TOF (Table S3); effect of 600 ppm SO2 on CB/NO conversion and CO2/N2 selectivity (Figure S2); CB oxidation products (Table S4); gaseous compounds (Figure S3); physicochemical properties of catalysts (Table S5); SEM-EDS mapping images (Figure S4); Raman spectra (Figure S5); Ti 2p XPS profiles (Figure S6); H2-TPR profiles (Figure S7); in situ DRIFT spectra (Figure S8); corresponding species for in situ DRIFT spectra peaks (Table S6); optimized multi-active center catalyst structure (Figure S9); dehydrogenation path for H2O (Figure S10); coadsorption configurations and PDOS of SO2 with NO, NO2, O2, NH3, and H2O gas molecules (Figure S11); adsorption energy and bond information of SO2 with NO, NO2, O2, NH3, and H2O (Table S7); competitive adsorption of CB and SO2 (Figure S12); adsorption configuration and PDOS of NO, NH3, and CB on O vacancies (Figure S13); removal path and energy barrier of CB (Figure S14); configurations and PDOS for SO2 on O vacancies (Figure S15); oxidation path of PdSO4 by NO2 (Figure S16); and generation path of NH4SO4ads (Figure S17) (PDF)This article has not yet been cited by other publications.

Sulfur-tolerant catalysts for emission control

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Research Progress in the Sulfur Resistance of Catalytic Combustion Catalysts

Knowledge and know-how in improving the sulfur tolerance of deNO x catalysts

Boosting SO2-Resistant NOx Reduction by Modulating Electronic Interaction of Short-Range Fe-O Coordination over Fe2O3/TiO2 Catalysts

Review of Sulfur Promotion Effects on Metal Oxide Catalysts for NO<i><sub>x</sub></i> Emission Control

Emission Control of Toluene in Iron Ore Sintering Using Catalytic Oxidation Technology: A Critical Review

Catalysts for gaseous organic sulfur removal

Boosting SO2-Tolerant Catalytic Reduction of NOx Via Selective Adsorption and Activation of Reactants over Ce4+–SO42– Pair Sites

Constructing core-shell Pt@MnOx/SiO2 catalyst for benzene catalytic combustion with excellent SO2 resistance: new insights of active sites

Supported catalysts for simultaneous removal of SO2, NOx, and Hg0 from industrial exhaust gases: A review

Sulfur and Water Resistance of Carbon-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NOx: A Review

SO 2 Poisoning Mechanism of the Multi-active Center Catalyst for Chlorobenzene and NO x Synergistic Degradation at Dry and Humid Environments

Unraveling SO2-tolerant mechanism over Fe2(SO4)3/TiO2 catalysts for NOx reduction

A review on sulfur trioxide (SO 3 ) removal from coal combustion process: Research progress challenges and suggestions

Recent progress on catalysts for catalytic oxidation of volatile organic compounds: A review

Design and Structure Regulation of VOCs Catalytic Oxidation Catalysts

Enhancing SO2 tolerance of Pt/CeO2 catalyst for CO oxidation via carbon-coated layers

Recent advances in simultaneous removal of NOx and VOCs over bifunctional catalysts via SCR and oxidation reaction

A Critical Review on Removal of Gaseous Pollutants Using Sulfate Radical-based Advanced Oxidation Technologies

Unraveling the Unexpected Offset Effects of Cd and SO2 Deactivation over CeO2-WO3/TiO2 Catalysts for NOx Reduction