Sandwich structured membrane adsorber with metal organic frameworks for aflatoxin B1 removal

Qian Wu,Jinxin Fan,Xiangrong Chen,Zhenzhou Zhu,Jianquan Luo,Yinhua Wan
DOI: https://doi.org/10.1016/j.seppur.2020.116907
IF: 8.6
2020-09-01
Separation and Purification Technology
Abstract:<p>Aflatoxins as toxic substances produced by microorganisms widely existed in food crops and detoxification of aflatoxins is highly desired to avoid their leaking into the environment. Herein, a novel combination strategy of metal organic frameworks (MOFs) and porous membrane was used to prepare membrane adsorbent for aflatoxin B1 (AFB1) removal. Firstly, the MOFs particles were readily fixed on a porous membrane by reverse filtration. Subsequently, polydopamine (PDA) coating and further charged polymer grafting were employed for sealing the MOFs particles. By systematically studying four kinds of MOFs particles for AFB1 adsorption, the MIL-100 and the resultant MIL-100 loaded membrane outperformed the other MOFs materials. Through comprehensively evaluating five different sealing approaches, it was found that the charge of the grafted polymers on the membrane was critical for AFB1 adsorption. The PDA/ alginate dialdehyde (ADA) modified MIL-100 loaded membrane prepared with PDA coating and ADA grafting for 30 min, could achieve the highest AFB1 removal efficiency of 76.3% and the membrane stability was greatly improved, meanwhile the water permeate flux was barely affected by the additional layers. A good reusability could be realized by a facile desorption process and the AFB1 removal efficiency kept at 61.8% after five reuse cycles. When dealing with real corn juice, the AFB1 removal efficiency in flow-through mode was lower than that obtained in dipping incubation mode, because severer membrane fouling occurred during dynamic adsorption which blocked the adsorption sites on the membrane. The present work not only demonstrated a reliable and effective approach to synthesize robust MOFs-loaded membrane for AFB1 removal, but also offered new insights into micropollutant removal with MOFs derived materials.</p>
engineering, chemical
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to develop an efficient method for removing aflatoxin B1 (AFB1) from food. Specifically, the author proposes a new type of sandwich - structured membrane adsorbent, which combines metal - organic frameworks (MOFs) and porous membrane technology to achieve effective removal of AFB1. ### Problem Background Aflatoxins are toxic substances produced by certain fungi and are widely present in food crops such as corn, peanuts, nuts, and dried fruits. These toxins can easily enter the food chain and have harmful effects on human health, and also have a negative impact on the livestock industry. Therefore, reducing or removing aflatoxins in food is crucial to prevent environmental pollution. ### Solution To solve this problem, the author adopts the following strategies: 1. **Combination of MOFs and Porous Membrane**: MOFs particles are fixed on the porous membrane by reverse filtration. 2. **Polydopamine (PDA) Coating and Grafting of Charged Polymers**: Used to seal MOFs particles, enhancing the stability of the membrane and the AFB1 adsorption performance. 3. **Systematic Evaluation of Different MOFs Materials**: The adsorption capacities of four different types of MOFs (MIL - 53, MIL - 68, MIL - 100 and MIL - 101) for AFB1 are studied. 4. **Optimization of Sealing Methods**: By comparing five different sealing methods, the optimal surface charge characteristics and their influence on the AFB1 adsorption efficiency are determined. ### Key Findings - **MIL - 100 Performs the Best**: Among the four MOFs materials, MIL - 100 shows the highest AFB1 adsorption efficiency. - **Significant PDA/ADA Modification Effect**: The MIL - 100 - loaded membrane prepared by PDA coating and ADA grafting achieved the highest AFB1 removal efficiency (76.3%) within 30 minutes, and the stability of the membrane was greatly improved, while the water flux was hardly affected by the additional layer. - **Reusability**: After a simple desorption process, the AFB1 removal efficiency of the membrane still remained at 61.8% after five repeated uses. ### Practical Application When processing actual corn juice, the AFB1 removal efficiency in the flow mode is lower than that in the soaking - incubation mode, mainly because more severe membrane fouling blocks the adsorption sites on the membrane during the dynamic adsorption process. In conclusion, this work not only provides a reliable and effective method for synthesizing MOFs - loaded membranes for AFB1 removal, but also provides new insights into the use of MOFs - derived materials to remove trace pollutants.