Abstract:Stable and efficient syngas production via methane dry reforming is highly desirable as it utilizes two greenhouse gases simultaneously. In this work, active Ni–Cu nanoalloys stably anchored on periclase-phase MgAlOx nanosheets were successfully synthesized by a hydrothermal method. These highly dispersed small Ni–Cu alloys strongly interacted with the periclase-phase MgAlOx nanosheets, on which abundant base sites were accessible. On the optimal catalyst (6Ni6CuMgAl–S), methane and carbon dioxide conversion always reached 85 and 90% at 700 °C under a gas hour speed velocity of 40,000 mL/gcat h for more than 70 h. The hydrogen production rate was maintained at 1.8 mmol/min, and the ratio of H2/CO was kept at approximately 0.96 under a CH4 and CO2 flow rate of 25 mL/min. Coke deposition and Ni sintering were effectively suppressed by the formation of a Ni–Cu alloy, the laminar structure, and the periclase phase of the MgAlOx support. Moreover, the alloy nanoparticles were reconstructed into a segregated Ni–Cu alloy structure in response to the reaction environment, and this structure was more stable and still active. Density functional theory calculations showed that carbon adsorption was inhibited on the segregated Ni–Cu alloy. Furthermore, the experimental thermogravimetric and O2-TPO results confirmed the significant decrease in carbon deposition on the Ni–Cu alloy catalysts.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14918.DFT theoretical calculation; additional characterizations of some catalysts, including XRD patterns, SEM images, N2 adsorption, desorption, and pore size distribution; H2-TPR profiles; H2-TPD profiles; HAADF image and element mapping; TEM images; XPS spectra; acid property; and additional reaction data (PDF)This article has not yet been cited by other publications.

Direct Conversion of Biogas to Syngas over Bimetallic Nickel-Cobalt Supported on α-Alumina Catalysts

Pd+Al2O3-Supported Ni-Co Bimetallic Catalyst for H2 Production through Dry Reforming of Methane: Effect of Carbon Deposition over Active Sites

Syngas production employing nickel on alumina‐magnesia supported catalyst via dry methane reforming

Direct Conversion of Carbon Dioxide to Methane over Ceria- and Alumina-Supported Nickel Catalysts for Biogas Valorization.

Ni-Based Molecular Sieves Nanomaterials for Dry Methane Reforming: Role of Porous Structure and Active Sites Distribution on Hydrogen Production

Catalytic CO2 reforming of CH4 over MgAl2O4 supported Ni-Co catalysts for the syngas production

Bi-reforming of Methane with Carbon Dioxide and Steam on Nickel-Supported Binary Mg–Al Metal Oxide Catalysts

Biogas dry reforming over Li–Ni–Al LDH-derived catalysts

Highly dispersed nickel-tuned silica lanthana catalyst: Interplay of morphology and textural properties for hydrogen-rich syngas through the carbon dioxide reforming of methane

Syngas production from methane dry reforming over Ni/Al2O3 catalyst

Catalytic Performance of Bimetallic Cobalt–Nickel/Graphene Oxide for Carbon Dioxide Reforming of Methane

Co–Ni Alloy Supported on CeO2 As a Bimetallic Catalyst for Dry Reforming of Methane

Active and Stable Hydrotalcite Derived Ni Catalysts for CO2 Reforming of Methane: Comparison with Catalysts by Incipient Wetness

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane

Methane Dry Reforming by Ni–Cu Nanoalloys Anchored on Periclase-Phase MgAlO x Nanosheets for Enhanced Syngas Production

Bimetallic Ni-Fe Supported by Gadolinium Doped Ceria (GDC) Catalyst for CO2 Methanation

Rational design of nickel-based catalyst coupling with combined methane reforming to steadily produce syngas

Understanding Coke Deposition Vis-à-Vis DRM Activity over Magnesia-Alumina Supported Ni-Fe, Ni-Co, Ni-Ce, and Ni-Sr Catalysts

Study on Methanation Performance of Biomass Gasification Syngas Based on a Ni/Al2O3 Monolithic Catalyst

Highly Stable Ni−B/Honeycomb−Structural Al2O3 Catalysts for Dry Reforming of Methane

Biogas Dry Reforming for Syngas Production on La Promoted Hydrotalcite-Derived Ni Catalysts