Abstract:Glycolysis of post-consumer polyethylene terephthalate (PET) waste is a promising chemical recycling technique, back to the monomer, bis(2-hydroxyethyl) terephthalate (BHET). This work presents sodium methoxide (MeONa) as a low-cost catalyst for this purpose. BHET product was confirmed by gas chromatography-mass spectrometry (GCMS), Nuclear Magnetic Resonance (NMR) Spectroscopy, melting point, and Differential Scanning Calorimetry (DSC). It was shown, not surprisingly, that PET conversion increases with the glycolysis temperature. At a fixed temperature of 190 °C, the response surface methodology (RSM) based on the Box-Behnken design was applied. Four independent factors, namely the molar ratio of PET: MeONa (50–150), the molar ratio of ethylene glycol to PET (EG: PET) (3–7), the reaction time (2–6 h), and the particle size (0.25–1 mm) were studied. Based on the experimental results, regression models as a function of significant process factors were obtained and evaluated by analysis of variance (ANOVA), to predict the depolymerization performance of MeONa in terms of PET conversion. Coefficient of determination, R2 of 95% indicated the adequacy for predicted model. Afterward, the regression model was validated and optimized within the design space with a prediction of 87% PET conversion at the optimum conditions demonstrating a deviation of less than 5% from predicted response. A van 't Hoff plot confirmed the endothermic nature of the depolymerization reaction. The ceiling temperature (TC = 160 °C) was calculated from Gibbs' free energy. A kinetic study for the depolymerization reaction was performed and the activation energy for MeONa was estimated from the Arrhenius plot (EA = 130 kJ/mol). The catalytic depolymerization efficiency of MeONa was compared under similar conditions with widely studied zinc acetate and cobalt acetate. This study shows that MeONa's performance, as a glycolysis catalyst is promising; in addition, it is much cheaper and environmentally more benign than heavy metal salts. These findings make a valuable contribution towards the chemical recycling of post-consumer PET waste to meet future recycling demands of a circular economy.

Low-temperature one-step synthesis of surfactant-free ZnO nanoparticles for efficient glycolysis of PET

The Recyclable Dual-Functional Zeolite Nanocrystals Promoting the High Efficiency Glycolysis of PET

Mechanism of the Significant Acceleration of Polyethylene Terephthalate Glycolysis by Defective Ultrathin ZnO Nanosheets with Heteroatom Doping

Dual-Porous ZIF-8 Heterogeneous Catalysts with Increased Reaction Sites for Efficient PET Glycolysis

Efficient Glycolysis of Waste Polyethylene Terephthalate Textiles over Zn-MCM-41 Catalysts

Fe 3 O 4 Nanodispersions as Efficient and Recoverable Magnetic Nanocatalysts for Sustainable PET Glycolysis

Synergistic Catalysis of Ionic Liquids and Metal Salts for Facile PET Glycolysis

Converting Waste Polyethylene Terephthalate to High Value Monomers by Synergistic Catalysts

Optimization and Kinetic Evaluation for Glycolytic Depolymerization of Post-Consumer PET Waste with Sodium Methoxide

Electrochemical Production of Glycolate Fuelled By Polyethylene Terephthalate Plastics with Improved Techno‐Economics

Towards a better understanding of the cosolvent effect on the low-temperature glycolysis of Polyethylene Terephthalate (PET)

Efficient glycolysis of used PET bottles into a high-quality valuable monomer using a shape-engineered MnOx nanocatalyst

Catalytic Amounts of an Antibacterial Monomer Enable the Upcycling of Poly(Ethylene Terephthalate) Waste

PET Glycolysis to BHET Efficiently Catalyzed by Stable and Recyclable Pd-Cu/γ-Al2O3

Rapid Surface Reconstruction of Amorphous‐Crystalline NiO for Industrial‐Scale Electrocatalytic PET Upcycling

Oxygen Vacancy Promoted Generation of Monatomic Oxygen Anion over Ni2+ -Doped MgO for Efficient Glycolysis of Waste PET.

Optimizing PET Glycolysis with an Oyster Shell-Derived Catalyst Using Response Surface Methodology

Molecular oxygen-assisted in defect-rich ZnO for catalytic depolymerization of polyethylene terephthalate

Glycolysis mechanism of efficient catalyzing waste polyethylene terephthalate by zinc acetylacetonate

Improving the Sustainability of Catalytic Glycolysis of Complex PET Waste through Bio-Solvolysis

Efficient depolymerization of PET over Ti-doped SBA-15 with abundant Lewis acid sites via glycolysis